You are browsing camaro6 
01-09-2018, 08:37 PM
|
#1 |
     Drives: 17 SS a8 Join Date: Feb 2010
Location: omaha
Posts: 1,678
|
150mph without suit case muffler?
I am going to be reworking my exhaust a little and was thinking about putting a couple of vbands a couple feet behind there turbos so I can drop most of the exhaust on max effort days.
Do I need to worry about the big void where the muffler sits when I am at high speed?
__________________
dropped a valve in the 6.2. now running a drop in rods and piston 5.3
best et 5.83@121 with the 5.3 http://www.camaro6.com/forums/showthread.php?t=465472 |
|
|
|
01-09-2018, 08:46 PM
|
#2 | |
|
Big Samoan ina little car
Drives: 2016 camaro Join Date: May 2014
Location: Tofiga Island
Posts: 1,872
|
Quote:
I know ZL1 addons is making a diffuser and additionally a close out panel for the rear end if you've added aftermarket exhaust. basically to keep the "floor" of the car flat...front to rear. one could easily fab up a plate/panel to connect to the bumper and another section underneath. general rule of thumb, every little bit helps 
__________________
 Don't sit around and watch everyone else live YOUR dreams...DO SUMPT'NWhen I see posts asking "whats the best intake, exhaust, etc" .... the answer to that is like a grandfather telling his grandkids "if you put salt on a birds tail, it'll let you catch it" #ThinkAboutIt "Winning Tip: Don't take my (or anyone else's) word for it. GO TEST IT!" - Dennis Grant |
|
|
|
|
|
01-09-2018, 11:08 PM
|
#3 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
I don't think so either. Should be good to go, its gonna be hard to run 150 in the 1/8th. Ha you need to make some 1/4 miles pass someday before you get to crazy. It would help if your car was a lower and pass more air over the top and not underneath the car. Think about that for this year, lower faster, taller slower its just physics. Its probably why my car has more mph then other cars with more mods and hp. I just like em low also.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
 |
|
|
|
|
01-12-2018, 07:58 PM
|
#4 |
Drives: 2016 2SS Camaro Join Date: Apr 2014
Location: Central Arkansas
Posts: 514
|
Mine trapped 152 with no muffler
|
|
|
|
|
|
|
|
|
Post Reply
|
| Thread Tools | |
|
|
