07-03-2021, 02:18 PM | #1 |
Drives: 13camaroZL1v,06 911, 18 StingerGT2 Join Date: Apr 2020
Location: mn
Posts: 68
|
Do heated seat modules need "programming"?
Have a camaro where the heated seats didn't work. After some looking I decided to replace the module with one from ebay.
It worked, but I also found there are 3 settings on it, not 2 like on the camaro. (click once, 2 lights, click again, 1 light, click again, no lights, but still on, click again no lights and off) I double checked the part number and was using one that superseded the one that was in my car originally. So, I decided to try one with the same part number, but from an equinox. Same thing, 3 settings instead of 2. I looked and the equinox does have 3 settings. So, do they have to be programmed for the car? The seats do warm up, and I'm wondering if because the module is from an equinox (yet same part number) if I may have problems if I don't get them programmed. Think it could have any problems if I don't? Thanks! |
07-03-2021, 02:33 PM | #2 |
RIP Betsy ( Vitara )
|
I put in a 2014 mylink that had heated seat buttons but only had a cloth interior. Years later I installed oem zl1 seats ( non recaro )
The seats heated without programming. Only 2 lights. 1 is seat 2 is seat and lower back.
__________________
First retrofitted 2014 mylink. |
07-03-2021, 03:25 PM | #3 |
Drives: 13camaroZL1v,06 911, 18 StingerGT2 Join Date: Apr 2020
Location: mn
Posts: 68
|
Maybe I should ask the question another way.
Does a heated seat module, when coming from a different car (in this case an Equinox with 3 settings), need to be programmed for a car, like the Camaro, with 2 settings? If so, and I choose not to, could it do any harm? If so, would it be able to be programmed with something like an Autel? |
07-03-2021, 07:18 PM | #4 |
RIP Betsy ( Vitara )
|
Id see the car reading 1 as 1 2 as 2 and 3 as on as you say but do not think it needs programming and will not hurt the car.
Where is the module?
__________________
First retrofitted 2014 mylink. Last edited by Pagliaro; 07-04-2021 at 08:27 AM. |
07-04-2021, 09:32 AM | #5 |
Drives: 13camaroZL1v,06 911, 18 StingerGT2 Join Date: Apr 2020
Location: mn
Posts: 68
|
It's under the driver's seat.
First push, 2 lights. - high Second push, 1 light. - medium Third push, 0 lights - low? It's for sure still on Forth push, 0 lights - off. You can hear an audible click from the module on 1st and 4th pushes. |
|
|
|
|