C7Carbon | Extended Rear spoiler 3D designed, help us finish! - Page 6

PWPhoto · 02-17-2018, 01:16 AM

I would be very interested in this spoiler as well. However, an option to possibly add a wicker bill to it would probably be favorable to some. Personally, if the height and slope are right, a wicker bill isn't needed for functionality,. Only for appearance. My only other request would be to offer this spoiler in different models, ie., with or without the side pieces. I personally wpupd not want them. I think it looks better without them. A d also maybe keep the slope on the lid a little flatter and then go up on the taper near the end more like a traditional blade spoiler has. Just thoughts. But as it is now, I would still be very I tested in it. Projected production times and final cost estimates would be greatly appreciated.

PWPhoto · 02-17-2018, 01:26 AM

As some have suggested, I would shorten the width up a bit. Only keep it wide enough to give coverage of the inner most spoiler center mount hole on the SS models. Also, i would keep it a little flatter on the lid and slope it up more at the back to give it more of a traditional blade spoiler style effect. I would also suggest selling in two different kits. One with the side pieces and one without. I personally would want it without. I am very interested in this none the less and will be anxiously awaiting more info on production availability and final sale cost.

C7 Carbon · 02-17-2018, 02:44 PM

Thanks again for the feedback everyone!. We are taking notes

carguy55 · 02-18-2018, 06:49 AM

I agree, an option to add a adjustable height wicker bill would be great, so you could add it for track days if required

C7 Carbon · 02-19-2018, 01:15 PM

Thanks for the input guys! PMs replied

PWPhoto · 03-01-2018, 09:34 PM

I see that the ZL1 1LE wings are up on your site. Any new info on the carbon fiber extended spoiler?

cleoent · 03-01-2018, 11:45 PM

Sign me up if it will work with stock ss holes.

TEKSCamaro · 03-03-2018, 06:20 AM

Just waiting for this to come out to get it

C7 Carbon · 03-03-2018, 08:29 PM

Thanks for follow up guys! this spoiler will definitely work with stock SS mounting points. We are aiming to post news very soon now!

Start The Machine · 03-03-2018, 09:51 PM

Quote:

Originally Posted by C7 Carbon

Thanks for follow up guys! this spoiler will definitely work with stock SS mounting points. We are aiming to post news very soon now!

What about the RS trunk holes?

VAZL1 · 03-04-2018, 04:03 AM

srcstc · 03-04-2018, 04:13 AM

Quote:

Originally Posted by Start The Machine

What about the RS trunk holes?

You guys already have the 1LE spoiler.

Sent from my iPhone using Tapatalk

C7 Carbon · 03-06-2018, 09:17 PM

Hey guys, here are the latest pics of our Extended rear spoiler which a detachable wicker bill bolted on. Let us know what you think!

cleoent · 03-07-2018, 12:12 AM

Sign me up.

03-01-2018, 11:45 PM	#77
cleoent Drives: 16' Camaro E-Force SS Join Date: Jul 2016 Location: Morgan Hill, Ca Posts: 836	Sign me up if it will work with stock ss holes. __________________ Leo 2016 e-Force 2SS Instagram @cleoent

03-04-2018, 04:03 AM	#81
VAZL1 Drives: 17 ZL1 Join Date: Mar 2017 Location: VA Posts: 1,075	__________________ 2017 ZL1 Coupe M6, Red Hot Mods; AFE Pro 5R CAI, Kong Ported Blower and Snout, NW 103 TB, Griptech 2.31 Upper, Kooks 2",JMS Voltage Booster, Flex Fuel, Mighty Mouse CC,Jannetty Racing Tune, 680 rwhp

03-07-2018, 12:12 AM	#84
cleoent Drives: 16' Camaro E-Force SS Join Date: Jul 2016 Location: Morgan Hill, Ca Posts: 836	Sign me up. __________________ Leo 2016 e-Force 2SS Instagram @cleoent

02-17-2018, 01:16 AM	#71
PWPhoto Drives: ‘21 2SS 1LE Join Date: Sep 2016 Location: Florence, SC Posts: 47	I would be very interested in this spoiler as well. However, an option to possibly add a wicker bill to it would probably be favorable to some. Personally, if the height and slope are right, a wicker bill isn't needed for functionality,. Only for appearance. My only other request would be to offer this spoiler in different models, ie., with or without the side pieces. I personally wpupd not want them. I think it looks better without them. A d also maybe keep the slope on the lid a little flatter and then go up on the taper near the end more like a traditional blade spoiler has. Just thoughts. But as it is now, I would still be very I tested in it. Projected production times and final cost estimates would be greatly appreciated.

02-17-2018, 01:26 AM	#72
PWPhoto Drives: ‘21 2SS 1LE Join Date: Sep 2016 Location: Florence, SC Posts: 47	As some have suggested, I would shorten the width up a bit. Only keep it wide enough to give coverage of the inner most spoiler center mount hole on the SS models. Also, i would keep it a little flatter on the lid and slope it up more at the back to give it more of a traditional blade spoiler style effect. I would also suggest selling in two different kits. One with the side pieces and one without. I personally would want it without. I am very interested in this none the less and will be anxiously awaiting more info on production availability and final sale cost.

02-17-2018, 02:44 PM	#73
C7 Carbon Drives: Camaro Join Date: Aug 2013 Location: San Diego Posts: 1,329	Thanks again for the feedback everyone!. We are taking notes

02-18-2018, 06:49 AM	#74
carguy55 Drives: 2018 1SS 1LE Join Date: Feb 2017 Location: Austin, Texas Posts: 1,487 View My Garage	I agree, an option to add a adjustable height wicker bill would be great, so you could add it for track days if required

02-19-2018, 01:15 PM	#75
C7 Carbon Drives: Camaro Join Date: Aug 2013 Location: San Diego Posts: 1,329	Thanks for the input guys! PMs replied

03-01-2018, 09:34 PM	#76
PWPhoto Drives: ‘21 2SS 1LE Join Date: Sep 2016 Location: Florence, SC Posts: 47	I see that the ZL1 1LE wings are up on your site. Any new info on the carbon fiber extended spoiler?

03-03-2018, 06:20 AM	#78
TEKSCamaro Drives: 2016 1LT Manual. Join Date: Nov 2016 Location: Milwaukee Posts: 23	Just waiting for this to come out to get it

03-03-2018, 08:29 PM	#79
C7 Carbon Drives: Camaro Join Date: Aug 2013 Location: San Diego Posts: 1,329	Thanks for follow up guys! this spoiler will definitely work with stock SS mounting points. We are aiming to post news very soon now!

03-06-2018, 09:17 PM	#83
C7 Carbon Drives: Camaro Join Date: Aug 2013 Location: San Diego Posts: 1,329	Hey guys, here are the latest pics of our Extended rear spoiler which a detachable wicker bill bolted on. Let us know what you think!

User Name		Remember Me?
Password