05-26-2020, 10:30 PM | #1 |
Drives: 2010 camaro Ls Join Date: May 2020
Location: Tallahassee
Posts: 5
|
WTB cold air intake v6 2010
Looking for a cold air intake 2010 v6 please hit me up with wat u have!
|
05-27-2020, 12:13 AM | #2 |
Drives: 2011 Camaro 2LT Join Date: Oct 2018
Location: Az
Posts: 367
|
I should be getting my Overkill supercharger any day now and have a 2010-2011 roto fab with less than 1k miles if that is a brand your interested in. PM Me if so.
Thanks |
05-28-2020, 10:29 PM | #3 |
Drives: 2011 CGM 2LT/RS Join Date: May 2011
Location: Round Rock, TX
Posts: 394
|
Ive got an Injen long tube cai. I need to find the instructions for it though
|
07-07-2020, 05:47 PM | #4 |
Drives: 2010 Camaro 2LT/RS Join Date: Nov 2016
Location: New Jersey
Posts: 35
|
I have one if you're still looking
|
07-07-2020, 05:58 PM | #5 |
Account Suspended
|
I have one, with a MaxEnergy tuner for $350 shipped.
Tuner is for 10-11 V6 or 10-12 V8. Has a bunch of CIA options. This intake has a MAF insert and does not need a tune, however, remove that insert, and you do. It's a big 3.5" diameter intake tube. Comes with a factory MAF sensor as well. They all run across the upper rad hose, even the factory intake does. Where the factory intake pushes into that bottom rail, you need to put a .5" spacer there for the shield to rest on. I used an old factory rear upper shock mount, with a 2" long bolt ran down through it, and through the rubber grommet, so the tube does not rub on the upper rad hose. |
|
|
|
|