[Richard0nee]

Thanks for the write Keon! I'll give this a try if I can find two resistors lol

[G2K]

Originally Posted by chrest

This is what mine did as well. Something isn't making a good contact. I took mine back off and soldered just a bit to ensure they would get solid contact and all is well now. Mine must have slipped off when I put them back in with the pigtails. I'd imagine your running into same issue

Don't settle

Still have resistors? Let me know so i can pm you my address

[G2K]

Originally Posted by keon718nyc

Just wanted to let you guys know that all resistors have been shipped out to those that PM'd me. Hope you guys enjoy these LED's as much as i am and should be arriving this week to you all.

I purchased the same LED bulbs as Nookz and let me tell you they are the brightest reverse light bulbs i seen in a long time. They are a bit long in size but fit in the tail lights just fine. Last night i took some pics again just to show how bright they are. Either way you end up going you can't go wrong with LED's!!! Also i did use 1 resistor for each bulb and has been working perfect since the initial install. Here is a link to the bulbs i had gotten just in case you wanted to go that route - https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

What did you use for you license plate led?

[RayJay75]

what led resistor you are using running into the led light staying on when cars off im using canbus bulb to

[RayJay75]

figured it out going to see if this resistor works on these bulbs

[chrest]

Originally Posted by G2K

Still have resistors? Let me know so i can pm you my address

Yup. ill send you a few

[Richard0nee]

Originally Posted by G2K

What did you use for you license plate led?

+1.. would like to change the LED on the plates too

Originally Posted by chrest

Yup. ill send you a few

If you have some more please send me the resistors for the tailights. I can paypal you the shipping cost

[chrest]

Originally Posted by Richard0nee

+1.. would like to change the LED on the plates too



If you have some more please send me the resistors for the tailights. I can paypal you the shipping cost

no worries on shipping. PM me address.

[keon718nyc]

Originally Posted by G2K

What did you use for you license plate led?

The LED license plate bulbs i am using are these - JDM ASTAR Extremely Bright 5730 SMD 194 168 175 2825 W5W T10 LED Bulbs,Xenon White, they seem to be gone from Amazon / Not available, but this type/style would work fine.

I also have a set of these Philips in this link but took them out - https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

The Philips work also but the JDM bulbs seem to cover way more area of the license plate light output wise and have a better white to them.

[Richard0nee]

Originally Posted by keon718nyc

The LED license plate bulbs i am using are these - JDM ASTAR Extremely Bright 5730 SMD 194 168 175 2825 W5W T10 LED Bulbs,Xenon White, they seem to be gone from Amazon / Not available, but this type/style would work fine.

I also have a set of these Philips in this link but took them out - https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

The Philips work also but the JDM bulbs seem to cover way more area of the license plate light output wise and have a better white to them.

Cool and these should be plug and play with no resistors needed correct?

[chrest]

i through some 194 LEDs i had layin around from previous vehicles. no issue.

[Adrian97c]

Originally Posted by keon718nyc

The LED license plate bulbs i am using are these - JDM ASTAR Extremely Bright 5730 SMD 194 168 175 2825 W5W T10 LED Bulbs,Xenon White, they seem to be gone from Amazon / Not available, but this type/style would work fine.

I also have a set of these Philips in this link but took them out - https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

The Philips work also but the JDM bulbs seem to cover way more area of the license plate light output wise and have a better white to them.

Thx for this... I got some cheap ones from autozone, but they are bluish & not bright at all..


Sent from my iPhone using Tapatalk

[keon718nyc]

Originally Posted by Richard0nee

Cool and these should be plug and play with no resistors needed correct?

No resistors are needed at all, simple plug and play

[G2K]

Originally Posted by chrest

i through some 194 LEDs i had layin around from previous vehicles. no issue.

Dude you ate way too awsome!!! Please do, i already sent you my addy via Pm