Lets get the ugly reverse lights off the rear bumper. - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

2SSRS@Gen5diy · 05-22-2012, 10:27 PM

Any one with me on this? i got the HUD for the Cadillac done and for the longest time wanted to get them of the rear bumper, so any one have any good ways to do this?

At one time i was going to move it to the diffuser but dont know if that will look any better so i want some input.

The Stig · 05-22-2012, 10:31 PM

I know how. Do you want them gone completely or just relocated to a more ascetically pleasing spot?

camaro2lt · 05-22-2012, 10:39 PM

just put some duck tape over the and then paint the duck tape the color of your car and there the lights are gone

jk this would be cool to get rid of those since when were you into caddys?

Flash-SS · 05-22-2012, 10:46 PM

Seems like the easiest way would be to paint the lenses the color of your car so they blend in, then disconnect them and use the wires to rig up some reverse lights somewhere else. I think LED's around the diffuser would be kinda cool. Beyond that you would be into some actual bodywork, like making some fill plates, bondo, sand, paint, clear, etc...

2SSRS@Gen5diy · 05-22-2012, 10:59 PM

Quote:

Originally Posted by stieger

I know how. Do you want them gone completely or just relocated to a more ascetically pleasing spot?

Your funny, we need to have some why of displaying were going backward, Dont we?

Quote:

Originally Posted by camaro2lt

just put some duck tape over the and then paint the duck tape the color of your car and there the lights are gone

jk this would be cool to get rid of those since when were you into caddys?

Funny thing about the inter net, i was found out,LOL guys have been e-mailing me for 1 year to help them out on a harness, so i made one with the parts i got from my dealer, sent it out today and that is it now i can mack them more if they want.

Quote:

Originally Posted by Flash-SS

Seems like the easiest way would be to paint the lenses the color of your car so they blend in, then disconnect them and use the wires to rig up some reverse lights somewhere else. I think LED's around the diffuser would be kinda cool. Beyond that you would be into some actual bodywork, like making some fill plates, bondo, sand, paint, clear, etc...

I was thinking the look of the 69 camaro tail lights more but updated?

MValdez17 · 05-22-2012, 11:10 PM

I like these European style lights all LED with the back up lights integrated into the tail lamps.

SSinister 2010 · 05-22-2012, 11:11 PM

You already know how, i can check on putting clear on the middle of the lens

2SSRS@Gen5diy · 05-22-2012, 11:24 PM

Shhh i am ordering white and red LED's as we work now dont tell any one.. LOL

Dznts · 05-22-2012, 11:42 PM

SSinister 2010 · 05-23-2012, 09:30 PM

Quote:

Originally Posted by 2SSRS

Shhh i am ordering white and red LED's as we work now dont tell any one.. LOL

OK Shhhhhh

The Stig · 05-24-2012, 08:23 AM

Quote:

Originally Posted by 2SSRS

Your funny, we need to have some why of displaying were going backward, Dont we?

Tjin Camaro

aLL STaR Camaro's Tjin edition

LED Crazy · 05-24-2012, 09:09 AM

Quote:

Originally Posted by stieger

Tjin Camaro

aLL STaR Camaro's Tjin edition

This is perfect!!

2SSRS@Gen5diy · 05-24-2012, 10:08 AM

Not bad but i say make one tail light out of the 2 and use all LEDs and in the center put red and white LED so you can wire it as the reverse lights.

The Stig · 05-24-2012, 10:20 AM

Quote:

Originally Posted by 2SSRS

Not bad but i say make one tail light out of the 2 and use all LEDs and in the center put red and white LED so you can wire it as the reverse lights.

05-22-2012, 10:27 PM	#1
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	Lets get the ugly reverse lights off the rear bumper. Any one with me on this? i got the HUD for the Cadillac done and for the longest time wanted to get them of the rear bumper, so any one have any good ways to do this? At one time i was going to move it to the diffuser but dont know if that will look any better so i want some input.

05-22-2012, 10:31 PM	#2
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	I know how. Do you want them gone completely or just relocated to a more ascetically pleasing spot? __________________

05-22-2012, 10:39 PM	#3
camaro2lt Drives: 2010 Camaro 2LT VR/RS CGM Rally's Join Date: May 2009 Location: Palmyra, PA Posts: 5,675 View My Garage	just put some duck tape over the and then paint the duck tape the color of your car and there the lights are gone jk this would be cool to get rid of those since when were you into caddys? __________________ Email: rdurso1@yahoo.com

05-22-2012, 10:46 PM	#4
Flash-SS Drives: 2010 2SS Grey/silver stripes Join Date: Feb 2010 Location: Navarre, FL Posts: 142	Seems like the easiest way would be to paint the lenses the color of your car so they blend in, then disconnect them and use the wires to rig up some reverse lights somewhere else. I think LED's around the diffuser would be kinda cool. Beyond that you would be into some actual bodywork, like making some fill plates, bondo, sand, paint, clear, etc... __________________ 2010 2SS LS3/ Custom painted gunmetal grey with "ghost" silver stripes / Roto-Fab CAI / Skip shift eleminator / Barton short throw shifter / 20% tint / muffler delete / ******** stealth enclosure with JL Audio 8W7 powered by a JL Audio J2 500.1

05-22-2012, 11:10 PM	#6
MValdez17 Drives: 2010 Camaro 2SS/RS Join Date: Oct 2009 Location: Ft Lauderdale, FL Posts: 318 View My Garage	I like these European style lights all LED with the back up lights integrated into the tail lamps. Attached Images __________________ 2018 ZL1 1LE HBM 2009 Yamaha R1 2011 Corvette Grand Sport 2010 2SS/RS Black & IOM Mods Here

05-22-2012, 11:11 PM	#7
SSinister 2010 Drives: 2ss camaro 2010 Join Date: Jan 2011 Location: brownsville texas Posts: 235	You already know how, i can check on putting clear on the middle of the lens

05-22-2012, 11:24 PM	#8
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	Shhh i am ordering white and red LED's as we work now dont tell any one.. LOL

05-22-2012, 11:42 PM	#9
Dznts Anabolic Connoisseur Drives: Sold - Blown Camaro 2SS/RS LS3 Join Date: Sep 2010 Location: Oklahoma Posts: 22,094	__________________

05-24-2012, 10:08 AM	#13
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	Not bad but i say make one tail light out of the 2 and use all LEDs and in the center put red and white LED so you can wire it as the reverse lights.