12-20-2012, 03:32 PM | #1 |
Drives: 2013 ZL1 Join Date: Dec 2012
Location: florida
Posts: 35
|
good quality carbon fiber bow tie?
Hi all,
i'm new here and new to camaro. I have a white ZL1 i just picked up. i think the car is perfect but would like to change the bow tie to match the rest of the car. white/flat black/cf. what shops do you use and trust for your parts and accessories and has anyone seen a real cf bow tie? |
12-20-2012, 04:14 PM | #2 |
Drives: E92 BMW M3 Join Date: Oct 2012
Location: Houston
Posts: 4,496
|
I have never seen a real one, and even though it's hydro-dipped I really like mine. I got them from RPI Designs, with the matte black border option. They do all the colors too from what I remember, and may be able to do white with black border. Think that would look pretty great!!!
__________________
SOLD - 2013 1LE - Pat G Spec'd Cam, NPP with 1 7/8" Long Tube Headers with High Flow Cats, Intake w/scoop, Ported Throttle Body, and Apex 1.25" Lowering Springs.
J-Rod Built and Matt@FSP Tuned Last edited by ST1LE; 04-01-2014 at 06:31 PM. |
12-20-2012, 04:16 PM | #3 |
Drives: E92 BMW M3 Join Date: Oct 2012
Location: Houston
Posts: 4,496
|
The Back.
__________________
SOLD - 2013 1LE - Pat G Spec'd Cam, NPP with 1 7/8" Long Tube Headers with High Flow Cats, Intake w/scoop, Ported Throttle Body, and Apex 1.25" Lowering Springs.
J-Rod Built and Matt@FSP Tuned Last edited by ST1LE; 04-01-2014 at 06:31 PM. |
12-20-2012, 04:51 PM | #4 |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
I had one made by a local shop here, cost $150. Unfortunately it went to a shady member otherwise I would still have it. There's nothing that compares to real CF.
Since you are in florida, I would try contacting G3 Composites.
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
12-20-2012, 05:00 PM | #5 |
Drives: E92 BMW M3 Join Date: Oct 2012
Location: Houston
Posts: 4,496
|
So true, nothing like it!! Looks Amazing!!!
__________________
SOLD - 2013 1LE - Pat G Spec'd Cam, NPP with 1 7/8" Long Tube Headers with High Flow Cats, Intake w/scoop, Ported Throttle Body, and Apex 1.25" Lowering Springs.
J-Rod Built and Matt@FSP Tuned |
12-20-2012, 08:34 PM | #6 |
Drives: 2013 ZL1 Join Date: Dec 2012
Location: florida
Posts: 35
|
thank you. any info on g3 composites? not that hydro dip looks bad. however i wanna leave the plasti dip, hydro dip, etc to my last car. since i went zl1 i want every part to be special even if cost a bit more or takes a little longer for me to obtain it.
|
12-20-2012, 10:13 PM | #7 | |
Account Suspended
Drives: camaro Join Date: Aug 2011
Location: east coast
Posts: 570
|
Quote:
https://www.facebook.com/#!/g3carbon?fref=ts |
|
02-24-2013, 04:28 PM | #8 |
Drives: 2016 SS 6 Spd Join Date: Jul 2009
Location: Ohio - www.rpidesigns.com
Posts: 3,055
|
Hey ST, Looks great. Do you mind if we post some pictures of you car on our Facebook page?
|
02-24-2013, 05:09 PM | #9 |
Drives: E92 BMW M3 Join Date: Oct 2012
Location: Houston
Posts: 4,496
|
No I dont mind.
__________________
SOLD - 2013 1LE - Pat G Spec'd Cam, NPP with 1 7/8" Long Tube Headers with High Flow Cats, Intake w/scoop, Ported Throttle Body, and Apex 1.25" Lowering Springs.
J-Rod Built and Matt@FSP Tuned |
|
|
|
|