Borla Exhaust Installed! - Page 3

Norm Peterson · 11-22-2017, 06:36 PM

Quote:

Originally Posted by zepol9

Norm your so ****ing stupid, you drive a mustang gtfo

I guess you haven't figured out yet that I actually like Camaros, and with that in mind you might consider being a little more careful about throwing comments like "your[sic] so ... stupid" around. Else it'll end up reflecting more on the sender than on your intended recipient.

Norm

enzia35 · 11-22-2017, 08:08 PM

Wow, so much butthurt in this thread. I'm glad OP likes his exhaust, and it's nice to have fun every now and then. Sarcasm is lost on the stupid.

SSJ455 · 11-22-2017, 08:46 PM

Quote:

Originally Posted by enzia35

Wow, so much butthurt in this thread. I'm glad OP likes his exhaust, and it's nice to have fun every now and then. Sarcasm is lost on the stupid.

So true!

Camaro85 · 11-23-2017, 04:32 AM

Quote:

Originally Posted by enzia35

Wow, so much butthurt in this thread. I'm glad OP likes his exhaust, and it's nice to have fun every now and then. Sarcasm is lost on the stupid.

Yeah let's have some fun at the expense of a company's reputation

Flash144 · 11-25-2017, 02:23 AM

Quote:

Originally Posted by Camaro85

Yeah let's have some fun at the expense of a company's reputation

I'm sure Borla didn't lose any sales in this thread. Plus it was very clearly put if you read it was all in good fun. Some people need to just relax and drink a cold one. Borla's not going to go out of business anytime soon. Just an update but I think the duct tape fell off that was holding up my heat shields. Might try electrical or masking tape soon.

Norm Peterson · 11-25-2017, 08:23 AM

You probably meant well, but the initial execution was in poor taste.

Missing the "meant well" part might be on me (and others), but intentionally leading us to miss it was entirely on you. Kind of like 'Jackasses' humor, not everybody is going to take it the same way.

Norm

Camaro85 · 11-25-2017, 10:06 AM

Quote:

Originally Posted by Flash144

I'm sure Borla didn't lose any sales in this thread. Plus it was very clearly put if you read it was all in good fun. Some people need to just relax and drink a cold one. Borla's not going to go out of business anytime soon. Just an update but I think the duct tape fell off that was holding up my heat shields. Might try electrical or masking tape soon.

It was clickbait to get people to read the post. Could of just put love my new Borla exhaust.

Flash144 · 11-26-2017, 04:25 AM

Quote:

Originally Posted by Camaro85

It was clickbait to get people to read the post. Could of just put love my new Borla exhaust.

Your probably right, but then again, maybe you wouldn't have read it?

Norm Peterson · 11-26-2017, 06:54 AM

Borla makes exhaust systems for more than just Camaros, so the original title could have stopped at "Installed" and I'd have still opened it up. Whether your 'problem' turned out to be a significant fitment issue or only that you now have a lot more trouble keeping your right foot out of it, I'd have understood perfectly.

Norm

EDFHOBBIES · 11-30-2017, 01:00 PM

every seen the Lambo shooting flames of the rev limiter.. wonder if they would hold up to a matt sorian tune on e85 with flames lol

Mr. Meh · 11-30-2017, 01:07 PM

Quote:

Originally Posted by enzia35

Wow, so much butthurt in this thread. I'm glad OP likes his exhaust, and it's nice to have fun every now and then. Sarcasm is lost on the stupid.

The inability to distinguish between sarcasm and clickbait is what's stupid.

Norm Peterson · 11-30-2017, 02:04 PM

Quote:

Originally Posted by Mr. Meh

The inability to distinguish between sarcasm and clickbait is what's stupid.

Which has nothing to do with failing to distinguish between good taste and bad. Or knowing that such a distinction exists and ignoring it anyway.

Norm

L78toLT1 · 11-30-2017, 02:17 PM

What is everyone using to cut your stainless exhaust pipes? My tube cutter is not quite large enough for 3" tubing. All of the affordable cutters I can find say not to use with stainless. I would hate to attack my car with a sawzall but may not have any other choice.

parbreak · 11-30-2017, 04:44 PM

Used a sawzall on mine with a brand new blade and it worked great.

11-22-2017, 08:08 PM	#30
enzia35 Drives: '16 Garnet Red 1SS Join Date: Mar 2014 Location: College Station, TX Posts: 3,450	Wow, so much butthurt in this thread. I'm glad OP likes his exhaust, and it's nice to have fun every now and then. Sarcasm is lost on the stupid. __________________ '16 Camaro 1SS '18 Miata GT Gone: '01 Camaro, '14 Camaro, '90 Miata

11-25-2017, 08:23 AM	#34
Norm Peterson corner barstool sitter Drives: 08 Mustang GT, 19 WRX Join Date: Jul 2012 Location: Eastern Time Zone Posts: 6,990	You probably meant well, but the initial execution was in poor taste. Missing the "meant well" part might be on me (and others), but intentionally leading us to miss it was entirely on you. Kind of like 'Jackasses' humor, not everybody is going to take it the same way. Norm __________________ '08 GT coupe 5M (the occasional track toy) '19 WRX 6M (the family sedan . . . seriously)

11-26-2017, 06:54 AM	#37
Norm Peterson corner barstool sitter Drives: 08 Mustang GT, 19 WRX Join Date: Jul 2012 Location: Eastern Time Zone Posts: 6,990	Borla makes exhaust systems for more than just Camaros, so the original title could have stopped at "Installed" and I'd have still opened it up. Whether your 'problem' turned out to be a significant fitment issue or only that you now have a lot more trouble keeping your right foot out of it, I'd have understood perfectly. Norm __________________ '08 GT coupe 5M (the occasional track toy) '19 WRX 6M (the family sedan . . . seriously)

11-30-2017, 01:00 PM	#38
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,345 View My Garage	every seen the Lambo shooting flames of the rev limiter.. wonder if they would hold up to a matt sorian tune on e85 with flames lol __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber

11-30-2017, 02:17 PM	#41
L78toLT1 Drives: Hyper Blue 2016 2SS 6M Join Date: Sep 2017 Location: North Ga Posts: 1,787	What is everyone using to cut your stainless exhaust pipes? My tube cutter is not quite large enough for 3" tubing. All of the affordable cutters I can find say not to use with stainless. I would hate to attack my car with a sawzall but may not have any other choice.

11-30-2017, 04:44 PM	#42
parbreak Drives: 2017 50th Camaro SS Join Date: Jul 2016 Location: Maryland Posts: 525	Used a sawzall on mine with a brand new blade and it worked great.

User Name		Remember Me?
Password