need help identifying something... - Page 2

datboi448 · 04-20-2016, 08:05 PM

Could be a flux capacitor...

oneredry · 04-21-2016, 08:29 AM

lol!!

anyway, thanks for identifying this. makes sense.

ctrlz · 04-21-2016, 08:52 AM

Quote:

Originally Posted by Glen e

Then i was right, its the receiver for the keyless entry.

Would bet this is correct!

Emoto · 04-21-2016, 09:27 AM

Quote:

Originally Posted by paul84043

It's a Dingledarm. It's there to dampen side fumbling. If your marzelvanes fumble too much they can cause total protonic reversal. It gets ugly from there.

This is really the biggest problem with the new Camaro. That and the tri-pronged blivot.

ctrlz · 04-21-2016, 04:47 PM

See post #4 in this thread:
http://www.camaro6.com/forums/showthread.php?t=445514

and this diagram:
https://gsi.ext.gm.com/image_en_us/g...88/4188671.gif

oneredry · 04-22-2016, 10:00 AM

^^awesome work.^^ outside this little rattle. been pretty flawless. When I snapped it back into place. seem pretty loose still so. So what I ended up doing was put a "stuffing" sort of where the clips were to prevent it from rattling around further. seemed to have fixed it.

Hyper16 · 04-22-2016, 06:41 PM

Quote:

Originally Posted by paul84043

It's a Dingledarm. It's there to dampen side fumbling. If your marzelvanes fumble too much they can cause total protonic reversal. It gets ugly from there.

Yep. Mine broke and I replaced it with one I got from Sears. The radio sounds better and the car stays clean longer now.

04-21-2016, 08:29 AM	#16
oneredry HYPER SS Drives: 2016 Supercharged 2SS Join Date: Feb 2014 Location: Troy OH Posts: 1,252	lol!! anyway, thanks for identifying this. makes sense. __________________ Ordered: 1/15/2016 2000 status 02/01/16 3000 status 02/29/16 3400 status 03/07/16 TPW of 03/14/16 4200 status 03/17/16 in transit! Delivered 03/23/16 2SS Hyper Blue \| 6M \| NPP \| Mag ride \| ceramic white Int. \| Black out bow ties \| P3 Gauge\| Front splitter. \| 6 pot upgraded brembo brakes. \| Magnuson Supercharger/95MM pulley \| Rotofab Intake \| ZL1 side skirts \| HRE FF04 wheels - Michelin PSS4 \| ZL1 add ons rock guards and lift points. \| AWE touring - resinated catback with link pipes.

04-22-2016, 10:00 AM	#20
oneredry HYPER SS Drives: 2016 Supercharged 2SS Join Date: Feb 2014 Location: Troy OH Posts: 1,252	^^awesome work.^^ outside this little rattle. been pretty flawless. When I snapped it back into place. seem pretty loose still so. So what I ended up doing was put a "stuffing" sort of where the clips were to prevent it from rattling around further. seemed to have fixed it. __________________ Ordered: 1/15/2016 2000 status 02/01/16 3000 status 02/29/16 3400 status 03/07/16 TPW of 03/14/16 4200 status 03/17/16 in transit! Delivered 03/23/16 2SS Hyper Blue \| 6M \| NPP \| Mag ride \| ceramic white Int. \| Black out bow ties \| P3 Gauge\| Front splitter. \| 6 pot upgraded brembo brakes. \| Magnuson Supercharger/95MM pulley \| Rotofab Intake \| ZL1 side skirts \| HRE FF04 wheels - Michelin PSS4 \| ZL1 add ons rock guards and lift points. \| AWE touring - resinated catback with link pipes.

04-20-2016, 08:05 PM	#15
datboi448 Drives: 2013 2LT RS, 2017 ZL1 Join Date: Jan 2013 Location: Houston, TX Posts: 479	Could be a flux capacitor...

04-21-2016, 04:47 PM	#19
ctrlz Drives: 2017 2SS, 50th pkg, M6, MRC, NPP Join Date: Jan 2016 Location: Ocean City, NJ Posts: 3,177	See post #4 in this thread: http://www.camaro6.com/forums/showthread.php?t=445514 and this diagram: https://gsi.ext.gm.com/image_en_us/g...88/4188671.gif

User Name		Remember Me?
Password