01-19-2011, 08:13 AM | #1 |
Drives: '88 Monte Carlo SS, '10 Camaro SS Join Date: Jan 2010
Location: RI
Posts: 224
|
Nitrous Times
Anyone have any track times for relatively stock cars with the giggle gas? I looked through the 1/4mi thread and there are none.
__________________
-Chris
'10 Camaro SS '88 Monte Carlo SS |
01-19-2011, 08:51 AM | #2 |
Drives: 2010 Camaro SS Join Date: Feb 2010
Location: Illinois
Posts: 499
|
Stay tuned this Spring.
|
01-19-2011, 09:12 AM | #3 |
Drives: 2010 RS/SS2 Join Date: Jul 2009
Location: Forney
Posts: 724
|
What are you calling stock? I went 10.90's but I had headers w/ full exhaust and a tune.
__________________
2010 SS/RS SIM
First to run 11's (11.83)on a stock long block. First to run 11's cam only First to run 11's all motor First to run 10's (10.96) and did it with a 100% bonestock long block and a power adder (nitrous) First to run 10's (10.55) on motor in 2010 Camaro First to break into the 5's (5.97) 1/8th mile First to cut a 1.5X sixty foot First to cut a 1.4x sixty foot First to car to cut a 1.3x 60ft |
01-19-2011, 01:24 PM | #4 |
Drives: 2010 Camaro 2SS/RS Join Date: Sep 2009
Location: Down South
Posts: 1,497
|
I went 10.9 with a forged engine and a 200 shot. Also had a cam, heads, headers, CAI and tune. This was using a Nitrous Outlet plate kit with a dedicated fuel system. 91 octane pump gas in the tank with C16 in the dedicated tank. Was also using a NANO system. Without the NANO I ran 11.3. Was going to up the shot to 300 but going twin turbo now.
__________________
2005 Dodge Ram 2500 RCSB Thunder Road Hemi Sport w/STS Turbo
2004 Dodge Ram SRT-10 - Silver - Stock 2003 Chevy 1500 RCSB Stepside 400SS - 408 in now awaiting Turbo |
01-19-2011, 01:45 PM | #5 |
ou mai gad
Drives: SW 2SS x2 Join Date: Feb 2010
Location: MX
Posts: 643
|
Hey J,
Where was that? and what was the NA time of the car? doing my "punieta mental" stuff for the M6+NO2 haha...
__________________
|
01-19-2011, 03:49 PM | #6 | |
Drives: '88 Monte Carlo SS, '10 Camaro SS Join Date: Jan 2010
Location: RI
Posts: 224
|
Quote:
What kind of injection (port, nozzle, plate, etc), and what was the rated shot?
__________________
-Chris
'10 Camaro SS '88 Monte Carlo SS |
|
01-19-2011, 04:00 PM | #7 | |
Drives: 2010 Camaro 2SS/RS Join Date: Sep 2009
Location: Down South
Posts: 1,497
|
Quote:
Here are some vids of my back to back 11.3 runs. These were without the NANO because we ran out while tuning it on the street. BTW, tengo un kit extra en Sin . Si lo ocupas le digo al carnal que te no mande.
__________________
2005 Dodge Ram 2500 RCSB Thunder Road Hemi Sport w/STS Turbo
2004 Dodge Ram SRT-10 - Silver - Stock 2003 Chevy 1500 RCSB Stepside 400SS - 408 in now awaiting Turbo |
|
01-19-2011, 11:11 PM | #8 |
ou mai gad
Drives: SW 2SS x2 Join Date: Feb 2010
Location: MX
Posts: 643
|
what else do you have?
__________________
|
01-20-2011, 12:56 AM | #9 |
Drives: 2010 Camaro 2SS/RS Join Date: Sep 2009
Location: Down South
Posts: 1,497
|
What do you need?
I have a couple Hemi blocks, some turbos, widened stock Camaro wheels, CAI, 5.7L Hemi ported heads, stock and ported L92 heads, NANO kit, Nitto NT05R 315/35/20 tires, ARP studs(heads/mains) etc. I got so much stuff I only have room for one car in a 3-car garage.
__________________
2005 Dodge Ram 2500 RCSB Thunder Road Hemi Sport w/STS Turbo
2004 Dodge Ram SRT-10 - Silver - Stock 2003 Chevy 1500 RCSB Stepside 400SS - 408 in now awaiting Turbo |
01-20-2011, 09:42 AM | #10 |
ou mai gad
Drives: SW 2SS x2 Join Date: Feb 2010
Location: MX
Posts: 643
|
sounds good, I may need a dolphin, do you have one of those laying around?
__________________
|
01-20-2011, 02:48 PM | #11 |
Drives: 2010 Camaro 2SS/RS Join Date: Sep 2009
Location: Down South
Posts: 1,497
|
Actually yeh, I have Flipper the original dolphin.
__________________
2005 Dodge Ram 2500 RCSB Thunder Road Hemi Sport w/STS Turbo
2004 Dodge Ram SRT-10 - Silver - Stock 2003 Chevy 1500 RCSB Stepside 400SS - 408 in now awaiting Turbo |
01-20-2011, 03:13 PM | #12 |
ou mai gad
Drives: SW 2SS x2 Join Date: Feb 2010
Location: MX
Posts: 643
|
Send me Flipper, some killer whale named Willy and more info on the nitrous stuff
__________________
|
01-20-2011, 04:13 PM | #13 | |
Drives: 2010 Camaro 2SS/RS Join Date: Sep 2009
Location: Down South
Posts: 1,497
|
Quote:
Isn't Willy living in Ensenada now? The nitrous kit is a Nitrous Outlet 2010 Camaro Specific Plate System. It comes with the following features: # Black Nitrous Outlet 10lb bottle. # Nitrous Outlet high flow 45 degree bottle valve with dual accessory ports. # The ports are designed to work with pressure assisted systems like NANO. # Quality bottom exit high flowing solenoids built to work with today’s fuels. # The highest flowing, best atomizing and best fitting Nitrous Plate available! # Custom designed solenoid mounts. # Prefabricated Stainless Hard lines. # Precise fitment fittings. # CNC machined fuel feed with Prefabricated Hard line. # Quick release stainless steel bottle brackets. # Bolts on using all factory equipment. (Including cold air box) # Neatly hides away under factory engine cover. # TPS extension harness included. # Jetting from 50-200 HP. # Capable of supporting horse power levels up to 400 HP! # E85 Compatible with different jetting. # Made in the USA! Here are some pics: You can get more info and pics on this thread: http://www.camaro5.com/forums/showth...=103127&page=2 BTW, my suegra is here but will be going back in a week so if you need something I can have her take it down there.
__________________
2005 Dodge Ram 2500 RCSB Thunder Road Hemi Sport w/STS Turbo
2004 Dodge Ram SRT-10 - Silver - Stock 2003 Chevy 1500 RCSB Stepside 400SS - 408 in now awaiting Turbo |
|
01-20-2011, 04:30 PM | #14 |
ou mai gad
Drives: SW 2SS x2 Join Date: Feb 2010
Location: MX
Posts: 643
|
meh I don't know, never liked the idea of mounting the TB the other way... just for plain looks haha.. how much do you want for it, are you going to sell the NANO stuff?
__________________
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Dry Nitrous Kits- Are any available for the SS? | JuicedSS | Forced Induction - V8 | 12 | 08-23-2015 09:15 PM |
Modifying for " Dummies" | Dr Jkel | Tuning / Diagnostics -- engine and transmission | 209 | 06-17-2012 11:24 PM |
Nitrous Outlet Kit | SRT10KLLR | Forced Induction | 17 | 04-24-2012 04:17 AM |
Nitrous Outlet Kit with lots of accessories | danhr | Forced Induction | 14 | 12-27-2010 04:32 PM |
20% Off Nitrous Outlet Products + Free Shipping | FRCBobby | Forced Induction | 0 | 12-14-2009 08:16 PM |