[mt3130]

Originally Posted by benplace

There will be the IROC-Z, the SS, the RS and the 4cyl Turbo Berlinetta.

The IROC and Berlinetta names need to stay dead. They both suck.

[Jeffro19]

I'm guessing it will be and SS in red. And no probably won't be able to sit in it. Because it probably will be a pre production car.

[Thebeezwax]

Originally Posted by benplace

There will be the IROC-Z, the SS, the RS and the 4cyl Turbo Berlinetta.

interesting.... I actually kinda like this idea

[Camaro_Corvette]

Originally Posted by HuJass

That was at the Indy Bash in September of '08.
I was there.

We got to sit in the mule, but the silver car was roped off with the door open.

They brought the yellow car (V-6?) out a bit later and some people were sitting in that one.

Yes! Forgot what they called it. Thanks!

[DGthe3]

Originally Posted by benplace

There will be the IROC-Z, the SS, the RS and the 4cyl Turbo Berlinetta.

Originally Posted by Thebeezwax

interesting.... I actually kinda like this idea

Poe's law strikes again.

On the internet, it's often impossible to tell the difference between genuine extremism and a parody of such extremism. Inevitably, someone will get it wrong.

[YoungGun1993]

Don't get your hopes up for a turbo 4 all.

[dirtdog67]

Does anyone know if we can live stream the event?

[The_Blur]

I can't speak for GM, but what I do know about the Camaro Team is that they want to engage customers. This is an event for Camaro enthusiasts. This isn't a car show, like most reveals. It's an event of its own for people like us who love Camaros.

[Number 3]

Ok, so here is why no one will likely get to sit in the cars.

At this point none of the parts are production. These will be prepped show cars so they will not risk someone getting in a car and having something break or fall off.

The interior tools for pilot production are not grained so anything they show will be only representative.

Could be wrong, but we haven't seen pilot cars driving around yet. They may starting Monday after the reveal, but as of now with 6 months to go, my bet is the parts are not off final production tools with production finish and grain.

[HuJass]

Originally Posted by Number 3

Ok, so here is why no one will likely get to sit in the cars.

At this point none of the parts are production. These will be prepped show cars so they will not risk someone getting in a car and having something break or fall off.

The interior tools for pilot production are not grained so anything they show will be only representative.

Could be wrong, but we haven't seen pilot cars driving around yet. They may starting Monday after the reveal, but as of now with 6 months to go, my bet is the parts are not off final production tools with production finish and grain.

If they bring a mule, they may let people sit in that. Like they did at Indy Bash '08.

[ShnOmac]

Originally Posted by Number 3

Ok, so here is why no one will likely get to sit in the cars.

At this point none of the parts are production. These will be prepped show cars so they will not risk someone getting in a car and having something break or fall off.

The interior tools for pilot production are not grained so anything they show will be only representative.

Could be wrong, but we haven't seen pilot cars driving around yet. They may starting Monday after the reveal, but as of now with 6 months to go, my bet is the parts are not off final production tools with production finish and grain.

I went to numerous shows and never was able to sit in the 5th gen until all tooling was done.

[Number 3]

Originally Posted by HuJass

If they bring a mule, they may let people sit in that. Like they did at Indy Bash '08.

Now that could happen.

[DP Valentino]

Originally Posted by YoungGun1993

Don't get your hopes up for a turbo 4 all.

I doubt that as well. It will two engines:

LT1 V8 Engine with 460hp/465tq or 450hp/445tq

LGX V6 Engine with 335hp/284tq