09-19-2017, 01:13 AM | #1 |
Drives: 2018 Camaro 1SS Join Date: Jul 2017
Location: MD
Posts: 247
|
clunk noise phastek springs FRONT
lowered the car over the weekend, now i have a small clunk noise when i hit a bump. think its from front passenger side, anyone else have this happen
|
09-19-2017, 10:40 AM | #2 |
Drives: S10 Join Date: Apr 2017
Location: Lynchburg VA
Posts: 12
|
Check your sway bar end links.
|
09-19-2017, 03:56 PM | #3 |
Drives: 2016 Camaro 2SS Join Date: Sep 2009
Location: Tampa, FL
Posts: 256
|
Check the sway bar end links, if you would like to replace the factory ones that seem to be an issue, give me a call or send me an e-mail. frank@bmrsuspension.com
Here is a link to our replacement front end links. https://www.bmrsuspension.com/index....612&superpro=0 |
09-20-2017, 01:36 PM | #4 |
Bigg Balls
|
I was waiting to install mine to see if this will fix the clunk. I've heard a few with this issue.
__________________
2017 Red Hot 1SS 8A..... Sold for a minivan
|
11-01-2017, 06:57 AM | #5 |
Drives: 2017 Camaro 2SS Join Date: Dec 2016
Location: Houston
Posts: 469
|
Old thread, but I installed my Phastek springs over the weekend. The fix here is to tighten everything. Mine ended up being the nut on the top of the strut was not torqued down.
Hope this helps someone. |
11-01-2017, 08:18 AM | #6 |
Drives: 2017 1SS 1LE Join Date: Jun 2016
Location: Detroit, MI
Posts: 1,001
|
If tightening everything doesn't work, you might need to replace some of the ball joints (suspension link ball joints, tie rod ball joints, stab bar link joints, etc.). If any of the factory ball joints were over-rotated at all during your installation, the ball-to-cup interface could have been stretched/damaged and cause a rattle due to the ball being loose in the cup.
__________________
2017 SS 1LE.
|
11-14-2017, 09:43 PM | #7 |
Drives: 2018 Camaro 1SS Join Date: Jul 2017
Location: MD
Posts: 247
|
i bouhgt BMR replacements, problem solved for now. Thanks all for the help. stock end links are junk, just replace them now lol THANKS to BMR for the help
|
11-15-2017, 08:47 AM | #8 |
Drives: 2016 Camaro 2SS Join Date: Sep 2009
Location: Tampa, FL
Posts: 256
|
|
12-03-2017, 01:55 AM | #9 |
Drives: 2017 Summit White 2SS Join Date: Jan 2017
Location: Dublin, CA
Posts: 546
|
What would cause this issue in the rear wheels?
__________________
Follow me on IG: @lip_stick.ss
|
|
|
Post Reply
|
|
|