305 to the wheels.. wtf why

[GSoccerCam]

out of 3 pulls.. I got 305 to the wheels in my 2012 camaro ss automatic with kooks long tubes 1 7/8 inch with a cold air intake and it being tuned.. oh yeah dynod on a mustang dyno... I know these normals aren't where they should be... they should be around 370 right ?

[GSoccerCam]

what could be the reasoning behind such low numbers......

[LBreezie]

Get a cam if you want 370 to the wheels.

[rvadim76]

yeah, those numbers are way too low.
Why don't you try another dyno? How does your car run like? What's you 0-60 time etc?
I would think about fuse pull but you said you got a tune..maybe wrong gas?

Keep us posted bud, good luck!

[GSoccerCam]

Originally Posted by LBreezie

Get a cam if you want 370 to the wheels.

ive talked to people who have done the same mods as me and are getting 370....

[rontammy0]

Originally Posted by GSoccerCam

ive talked to people who have done the same mods as me and are getting 370....

I posted here once..so i thought. Your about 70 rwhp or so short..im 360 rwhp and 400ft lbs torque with my mods.

[ticowarbird]

I thought I posted here too... Anyway... After ARH LTs, Vararam intake, and I tune I got 371 to the wheels. Cam and ported heads got me to 450, somethings off.

[GSoccerCam]

Originally Posted by ticowarbird

I thought I posted here too... Anyway... After ARH LTs, Vararam intake, and I tune I got 371 to the wheels. Cam and ported heads got me to 450, somethings off.

Originally Posted by rontammy0

I posted here once..so i thought. Your about 70 rwhp or so short..im 360 rwhp and 400ft lbs torque with my mods.

Originally Posted by rvadim76

yeah, those numbers are way too low.
Why don't you try another dyno? How does your car run like? What's you 0-60 time etc?
I would think about fuse pull but you said you got a tune..maybe wrong gas?

Keep us posted bud, good luck!

thanks. and I don't have any 0-60 times since any mods.. but I always use 93 nothing else.. also I accidently posted in transmission forums. i cant figure out how to delete it though sorry about that.
and my car runs fine... it doesn't do anything that stands out.... it sort of suprised me how low the numbers were /:
could something be causing it not to get the full power ?? compression? knock?

[bleavens1962]

What kind of tune, you did not specify ?
Many V6 guys run HP or IPF
Is there another shop you can get your car dyno'd at that has the same brand dyno ?
Start at the dyno readings first, might not be the car..

[GSoccerCam]

Originally Posted by bleavens1962

What kind of tune, you did not specify ?
Many V6 guys run HP or IPF
Is there another shop you can get your car dyno'd at that has the same brand dyno ?
Start at the dyno readings first, might not be the car..

Dyno Steve tuned it for me through SCT ii x4 .. hes gonna check out my data logs.. i believe its the dyno. but hes kind enough to check my data logs to make sure nothings going on

[qcman]

Originally Posted by GSoccerCam

Dyno Steve tuned it for me through SCT ii x4 .. hes gonna check out my data logs.. i believe its the dyno. but hes kind enough to check my data logs to make sure nothings going on

Steve is great! And will go out of his way to help you out. I would think its the dyno perhaps the dyno guy can provide you with some comparable car's numbers as it would show if they were all on the low side too. I really doubt your car is anywhere that low.