03-23-2015, 10:09 AM | #1 |
Keeper of the Gold Acorn
Drives: 2011 2SS/RS Join Date: Aug 2012
Location: Houston
Posts: 177
|
Subwoofer enclosures
I am reaching to out here to anyone who might have gone this route...
This is for the 2011 Camaro 2SS/RS. Im looking for anyone who chose to use a Zenclosures subwoofer box vs. using the one from Sub Thump. Thanks.
__________________
2011 RJT 2SS/RS - Kooks 1-7/8 Long Tubes, High Flow Cats, Corsa Cat Back Exhaust, MTI Short Throw Shifter, Vmax Ported Throttle Body, Fasster Billet Fuel Rails & Custom Braided Vapor and Fuel Lines, CAI Cold Air Intake, RX Catch Can, Nitto Invos, Hawk HPS, BMR Trailing Arms, 2x Zapco ST4x-SQ amps, ST850x-II Sub amp, Morel Tempo 6 componenets, Morel Maximo 6x9, Morel 124 Primo Sub, Zapco DSP8Z Processor... More to Come.
|
03-23-2015, 11:03 AM | #2 |
Montani Semper Liberi
Drives: 2011 Black 2SS/RS w/ IOM stripes Join Date: Feb 2010
Location: Masontown, WV
Posts: 4,841
|
I have one from the Sub Thump site that will be going in on April 20th, it's the one with the built in amp shelf that is a side setter.
__________________
Stainless Works 1 7/8 Long Tude Headers, Stainless Works High Flow Cats, Stainless Works Retro Chambered Catback, Z/28 Air Intake, RDP Tuned, FR41 Chrome Rims, 1100W stereo, 35% Tint |
03-23-2015, 12:23 PM | #3 |
Drives: 14' 1LT/RS Join Date: Mar 2015
Location: Los Angeles/Redondo, CA
Posts: 21
|
I also have sub-thump stealth 12" enclsoure + the amp rack.
|
03-23-2015, 01:28 PM | #4 |
Keeper of the Gold Acorn
Drives: 2011 2SS/RS Join Date: Aug 2012
Location: Houston
Posts: 177
|
I understand that there are a lot of folks who have gone with the Sub Thump boxes. My inquiry was more along the lines of who has used the Zenclosure box instead and what kind of quality they produce as opposed to Sub Thump.
Thanks.
__________________
2011 RJT 2SS/RS - Kooks 1-7/8 Long Tubes, High Flow Cats, Corsa Cat Back Exhaust, MTI Short Throw Shifter, Vmax Ported Throttle Body, Fasster Billet Fuel Rails & Custom Braided Vapor and Fuel Lines, CAI Cold Air Intake, RX Catch Can, Nitto Invos, Hawk HPS, BMR Trailing Arms, 2x Zapco ST4x-SQ amps, ST850x-II Sub amp, Morel Tempo 6 componenets, Morel Maximo 6x9, Morel 124 Primo Sub, Zapco DSP8Z Processor... More to Come.
|
05-10-2016, 02:28 PM | #5 |
Drives: 2015 Camaro 1LT RS Join Date: Mar 2015
Location: Orlando
Posts: 12
|
Looking for 12 rear side sub enclosure box
|
05-13-2016, 10:00 PM | #6 | |
Drives: 2013 Camaro ZL1, 2006 Chevy Equinox Join Date: Apr 2013
Location: Ontario, Canada
Posts: 833
|
Quote:
Maybe ive just cracked way too many off the shelf boxes over the years.....
__________________
|
|
05-14-2016, 09:59 AM | #7 |
I run 2 catch cans...
|
Most off the shelf boxes use too thin MDF or even worse plywood. A good box is going to kill you on the shipping costs. If you want a decent box that you don't have to build, pick one of these: http://www.parts-express.com/cat/emp...aker-boxes/402
__________________
Overkill tuned • Air Scoop • CAI • VMAX PTB • JacFab Laminator FX + Extendolator • SOLO Hi-Flo Cats + Cat-Back Exhaust
View my top 3 LFX performance mods and more: . |
|
|
|
|