01-08-2018, 04:43 PM | #1 |
Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,316
|
widen stock wheel question
Does it matter if I start with a 9 or 9.5 wheel from a 2016 up SS to go to 11"? The widen wheel site says the weld in a one or two inch band. The 2015 and below SS wheel at 9" wide is much easier to come by. Also please post the offset.
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
Last edited by oldman; 01-09-2018 at 12:37 PM. |
01-08-2018, 06:40 PM | #2 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,800
|
lol wut
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
01-08-2018, 10:25 PM | #3 |
Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,316
|
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
01-08-2018, 10:50 PM | #4 |
Drives: 2SS 1LE Join Date: Oct 2011
Location: AK
Posts: 2,291
|
|
01-10-2018, 01:08 PM | #5 |
Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,316
|
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
01-10-2018, 01:50 PM | #6 | |
Drives: '16 2SS / '05 SRT10 Ram / '65 bu Join Date: Dec 2015
Location: Philthy
Posts: 978
|
Quote:
Edit; I would start with a 9.5 wheel instead of a 9 if you can.
__________________
H/C SBE 9.80@140 powered by Texas Speed
Last edited by Snowblind; 01-10-2018 at 02:34 PM. |
|
01-10-2018, 07:17 PM | #7 |
Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,316
|
thanks, your Camaro and mine have the same stripe! Yours much quicker... LOL, I was waiting for your 3.73 write up, did you post already?
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
|
|
Post Reply
|
Thread Tools | |
|
|