11-11-2017, 08:25 AM | #1 |
Drives: Hyper Blue 2016 Camaro 2SS Join Date: Oct 2017
Location: MO
Posts: 8
|
Running wheel spacers with factory 5 spoke
Hey all,
Searched my head off and couldn’t quite find the answer I was looking for. I have a 2016 2SS and I have mounted the factory alloy 5 spokes in place of the split 5s. Just personal preference- now, I know for anything under 25mm in the rear with the split 5s, stud trimming needs to be done in order for the wheel to sit flush on the spacer. I was looking at doing 20mm Eibach spacers, but don’t want to do any stud modifications if I can avoid it. Does anyone have any experience with this with the factory 5 spokes? It sounds like it should work, but wanted to see if anyone had some personal experience. Thank you. |
11-20-2017, 07:56 PM | #2 |
Drives: 2016 Garnet Red 1SS Join Date: Feb 2011
Location: Tucson
Posts: 208
|
You'll need to get longer studs or you will not have enough turns on the Lug nut.
|
11-21-2017, 11:05 AM | #3 |
Drives: 2016 Camaro 2ss Join Date: Feb 2016
Location: Orlando
Posts: 206
|
You will have to cut the stock lugs in order for it to fit. Just the portion that doesn't contain thread though.
|
|
|
Post Reply
|
|
|