01-04-2018, 06:43 PM | #1 |
Flyin NOE
Drives: 2018 ZL1 (A10) Join Date: Apr 2017
Location: TX
Posts: 949
|
Lifting the Rear End
Anyone know if it's possible to lift the back end of the car at the Rear Diff?
I'm thinking I can use a piece of 4x4 on a jack and lift just the ass end. I want to be able to rotate (spin, not swap) the back tires in my garage. |
01-04-2018, 06:54 PM | #2 |
Drives: 2017 ZL1 M6 Join Date: Apr 2017
Location: MN
Posts: 31
|
Use the rear cradle as the lift point, not the diff.
|
01-04-2018, 07:00 PM | #3 |
Flyin NOE
Drives: 2018 ZL1 (A10) Join Date: Apr 2017
Location: TX
Posts: 949
|
Would love to but I'm using a floor jack, single lift point.
Unless I'm misunderstanding what you mean by "cradle" |
01-04-2018, 07:11 PM | #4 |
Drives: 2017 ZL1 M6 Join Date: Apr 2017
Location: MN
Posts: 31
|
The rear cradle is the main structure in the rear that the suspension components tie into. It’s directly behind the diff, looks like an I-beam almost (painted black).
|
01-04-2018, 07:14 PM | #5 | |
Flyin NOE
Drives: 2018 ZL1 (A10) Join Date: Apr 2017
Location: TX
Posts: 949
|
Quote:
Thank you! Last edited by kwav8r; 01-04-2018 at 07:30 PM. |
|
01-05-2018, 05:50 PM | #6 |
Drives: 2021 LT1 10 speed auto Join Date: May 2013
Location: Connecticut
Posts: 2,343
|
Absolutely no problem lifting with the diff. I block of wood between the floor jack and the housing, raises just fine.
|
|
|
Post Reply
|
|
|