08-24-2016, 12:16 AM | #1 |
Drives: 07 C6, G8, S3 Join Date: May 2016
Location: New York
Posts: 66
|
ZL1 spoiler or Blade spoiler?
Anybody gonna install the new ZL1 rear wing instead of the blade wing?
|
08-24-2016, 12:43 AM | #2 |
Drives: 2016 camaro ss Join Date: Oct 2010
Location: Spring, TX
Posts: 1,127
|
I prefer the ZL1 spoiler. I'd love to get it but I have a feeling it will cost too much for me to actually get.
__________________
2016 camaro 2SS hyper blue/Kalahari, A8, MRC, NPP, sunroof, SW headers through axleback, Circle D 3600rpm TC, Pray ported IM/TB, E85
Sold: 2002 Z28, NBM, M6, 460rwhp, 2009 HHR SS RIP : 2002 WS6 Black, A4, 355rwhp |
08-24-2016, 06:24 AM | #3 |
マスタング = 遅い
Drives: 2017 Chevrolet Camaro SS 1LE Join Date: Aug 2015
Location: Florida
Posts: 7,061
|
While better than the SS one, I still think the blade looks better/cleaner.
|
08-24-2016, 08:38 AM | #4 |
Drives: 2018 ZL1 Join Date: Feb 2016
Location: Scranton pa
Posts: 305
|
In my opinion : blade>SS stancion>zl1 stancion
__________________
|
08-24-2016, 08:57 AM | #5 |
Drives: 2018 Colorado ZR2 Join Date: Aug 2015
Location: Ohio
Posts: 557
|
There are definitely two camps when it comes to spoilers. You either like wings or you don't.
I'll go with a blade spoiler. Maybe the fact I see Civics and Cobalts with a 'sporty' wing attached and that influences my opinion. And I'm aware that the wing on the SS, ZL1, etc. are functional performance accessories, but I can't get all the other wings out of my head. |
08-24-2016, 09:26 AM | #6 |
Drives: 2011 Camaro SS Join Date: Apr 2013
Location: North Carolina
Posts: 1,849
|
Definitely the blade. The ZL1 spoiler is basically the stanchion spoiler that most people have very mixed feelings over, only in different dimensions. I'd pass on that in a heartbeat so long as: A) My car is not an actual ZL1, thus this mod is hard to justify. B) It didn't offer some massive improvement in performance for *normal* driving. Spoiler alert (pun intended) -- it won't. So get what looks better: The blade.
|
|
|
Post Reply
|
|
|