09-19-2011, 10:54 AM | #1 |
how much rwhp to outrun zr1?
How much rwhp will it take for my camaro to outrun a zr1 from a 30 roll? I have 573 rwhp and 596rwtq.
|
|
09-19-2011, 11:27 AM | #2 | |
Drives: 14 Silverado LTZ Z71, 16 Camaro SS Join Date: Nov 2009
Location: Jackson, Michigan
Posts: 4,407
|
Quote:
Your camaro with a supercharger is about 4k. You would need at least 70 more rwhp than the zr-1 for it to be a good race just as a quick guess. I think they put down about 530rwhp stock. I am guessing you would need about 600rwhp for it to be interesting. About ~650 to "outrun" it. |
|
09-19-2011, 12:25 PM | #3 |
Always On Kill!
Drives: S.I.M. SS Join Date: Aug 2009
Location: Louisiana
Posts: 780
|
Not only do you need about as much rwhp because of the ZR1's weight, you will also need ALOT of traction to put all that power to the ground or else he will just walk you. Even from a roll of any kind you still need to have some great tires that will grip like a tiger and a good suspension setup to help it all work in unison.
Whatever tires comes on the Z06 Centennial editions wouldn't be a bad idea, but I don' think the tread life last very long though.
__________________
S.I.M. SS(L99):
*American Racing Headers (LT) *Magnaflow cat-back competition exhaust *K&N typhoon CAI *Aggressive cam. *Tune **Result**: 465rwhp/ 447rwtq. Satisfied. |
09-19-2011, 01:16 PM | #4 |
Well, I'm definitely going to need some better tires, but I'm done modding for now. So, I'm just gonna line up and see what happens.
|
|
09-19-2011, 01:43 PM | #5 |
|
I know 616 RWHP and a good set of Mickey Thompson D/R will do it, but it will be close if both can drive.
__________________
LPE 417 - TVS2300 787 RWHP 759 Torque - Built by WWW.KYSPEED.COM
|
09-19-2011, 04:43 PM | #6 |
Account Suspended
Drives: SuperCharged 2SS/RS IOM MN6 Join Date: May 2009
Location: CA
Posts: 5,094
|
big bank account is what it will take.
|
09-19-2011, 05:30 PM | #7 |
Drives: 2010 2ss/rs M6 Join Date: Nov 2010
Location: Il
Posts: 931
|
1000!
|
09-19-2011, 07:27 PM | #8 |
Drives: 2009 Challenger RT, 2010 Mustang GT Join Date: Jul 2009
Location: Scottsdale, AZ
Posts: 719
|
After you get that 650 rwhp, plan on forging everything under the hood, new tranny, driveshaft, dif, wheels, tires, suspension, etc... Strip the interior out and put a carbon fiber body on... And find an 80 lb driver.
__________________
AZ MSCL: 2009 Challenger RT, 2010 Mustang GT Premium.
|
09-19-2011, 08:21 PM | #9 |
Boosted Moderator
|
Oh, I don't know about all that...
__________________
If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley
Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. “If everything seems under control, you're just not going fast enough.” Mario Andretti If you can turn, you ain't going fast enough... |
09-19-2011, 08:24 PM | #10 |
Drives: 2009 Challenger RT, 2010 Mustang GT Join Date: Jul 2009
Location: Scottsdale, AZ
Posts: 719
|
OK, a bit exaggerated. I'll go 100 lbs on the driver...
__________________
AZ MSCL: 2009 Challenger RT, 2010 Mustang GT Premium.
|
09-19-2011, 08:27 PM | #11 |
Drives: 2010 M6 2SS Join Date: Mar 2011
Location: South Windsor, CT
Posts: 1,202
|
I weigh 130...can I drive?
__________________
2010 Camaro SS M6. Heads/Cam/Intake/Headers/Exhaust/Suspension |
09-19-2011, 08:39 PM | #12 |
Boosted Moderator
|
I can't reply any further but....
__________________
If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley
Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. “If everything seems under control, you're just not going fast enough.” Mario Andretti If you can turn, you ain't going fast enough... |
09-19-2011, 10:55 PM | #13 |
Drives: 2009 Challenger RT, 2010 Mustang GT Join Date: Jul 2009
Location: Scottsdale, AZ
Posts: 719
|
I don't get it, what are you saying???
Just kidding and I was simply trying to be a bit facetious with all the suggested mods. I'm with you! You could leave the seats in using a titanium roll bar. Could even let MikeOD drive!
__________________
AZ MSCL: 2009 Challenger RT, 2010 Mustang GT Premium.
|
09-19-2011, 11:00 PM | #14 |
Camaro SL,UTs
Drives: 2010 Camaro SS/RS #16429 Join Date: Sep 2006
Location: South Jordan, UT
Posts: 7,358
|
Outrun? 1/4 Mile? Top end?
More details please?
__________________
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ZR1 Camaro ? | JAB | 5th Gen Camaro SS LS LT General Discussions | 16 | 07-15-2011 09:09 AM |
ZR1 TWIN DISC CLUTCH KIT or Mcloed RXT twin disc clutch | qtr-camaro ss | V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) | 10 | 06-07-2011 10:46 PM |
PWA "The Lounge" | DGthe3 | Off-topic Discussions | 143773 | 11-06-2010 11:00 AM |
Best CAI-Exhuast Combo for max RWHP? | Rikarus | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 10 | 07-29-2009 08:35 PM |