You are browsing camaro5 
 |
|
10-21-2017, 07:44 PM
|
#1 |
 
|
Factory tire pressure
Hey guys running stock pirellis and have bolt ons and a tune from dyno steve, when drag racing i think my 60fts are a bit slow, best ive got is a 2.07, is there some room for improvement on the stock tires, im running 24 pounds or so on the rears. thanks guys.
__________________
2012 2ss , long tube headers , summit x pipe ,borla mufflers, vararam intake, vmax ported throttle body rdp motorsports dynosteve tuned, BMR trailing arms and bushings elite engineering catch can. [Ifirst camaro ]2012 LT LFX, nytrex wet system ,GPI dyno tune, Injen longtube intake, Dynomax axle back exhaust, Vmax ported throttle body, elite engineering catch can.
|
|
|
|
10-23-2017, 10:54 AM
|
#2 |
|
"Old School"
Drives: 2010 2SS L99 Join Date: Apr 2015
Location: Sherrills Ford, NC
Posts: 1,295
|
That was about the best I could do without drag radials. I think you are doing good.
|
|
|
|
|
10-23-2017, 11:51 AM
|
#3 |
|
Drives: 2017 Silverado Join Date: Mar 2017
Location: Muncie
Posts: 217
|
I have had a 1.94 60 ft with just a CAI and tune. I would expect you could match that. Just have to have a light foot for the first few feet.
__________________
'14 2SS A6, CAI, 2" TSP Headers and tune: SOLD
 '13 SS @ Burkhart Chassis |
|
|
|
|
10-23-2017, 12:32 PM
|
#4 |
        
Drives: 2010 SS 2SS M6 Join Date: Aug 2016
Location: Smithsburg, Md.
Posts: 2,445
|
you can drop to 20psi...but just get some DR's...good luck!
__________________
2010 SS 2SS M6 - Tune by RDP dynoSteve!(Woot) - Daily Driver - 150K! - All work by me...
|
|
|
|
|
10-25-2017, 02:56 PM
|
#5 |
Drives: Fire Engine Join Date: Oct 2008
Location: WPB, Florida
Posts: 1,415
|
My best short times were at the factory recommended 32psi
__________________
12.618 @ 110.75 Bone Stock 1/4 mile
8.165 @ 86.52 Bone Stock 1/8 mile 11.189 @ 124.44 on a 1.73 60' TVS2300 3.4 pulley, JRE tuned, Kooks LT headers and HF cats, MBRP catback exhaust, CAI intake, ADM scoop. Stock wheels/tires. Sold |
|
|
|
|
|
|
|
 |
|
|
