[gdgraph]

Nice! Lucky, I only had rubbing on the driver side rear but it was very minor. I still would recommend doing the harness relocate just to be safe for when the suspension gives. I hear it's very expensive if it gets damaged. But love my Comp 2s! They hook well for an A/S!

Originally Posted by RedDragon16

https://youtu.be/JO9w3mJA5ts
Just installed my new MRR 228's! Feeling good about it. In mexico ofcourse. 305/35/20 comp 2s in the rear and no rub!

[gdgraph]

It's great that they are sending a replacement, but just curious, is that a scratch or is it just a marking on top of the plastic (if it is it looks like it could be rubbed out with a cotton rag and a minor solvent (all purpose cleaner). May save you the effort of having to take it all apart ect, but if it's an actual scratch I'd def send it back.

Originally Posted by Trizin

Attachment 853971

Installed Darkened Taillights. Started with the driver side put it in very easy no problems moved on to the passenger side put it in had just about everything reattached and bolted when i noticed the mark. I ordered the lights from Thatgmpartsguy so i gave them a call. Within 5 minutes they had taken care of everything. They are sending out a replacement and i can just switch them out and send back this one with the mark. I mainly wanted to share the great customer service experience i had with Thatgmpartsguy.

[Trizin]

Originally Posted by gdgraph

It's great that they are sending a replacement, but just curious, is that a scratch or is it just a marking on top of the plastic (if it is it looks like it could be rubbed out with a cotton rag and a minor solvent (all purpose cleaner). May save you the effort of having to take it all apart ect, but if it's an actual scratch I'd def send it back.

its actually like inside the light under the plastic. Looks like chalk maybe something during production that wasn't caught.

[gdgraph]

Oh gottcha, and that's exactly what I first thought was that it was chalk (there was some of that on the back of my tail lights that they must have used to label them during production.

I assumed it wasn't chalk because it woulda wiped off when you touched it haha, but makes sense if it got underneath.

Well, once it all gets worked out you'll love them, still one of the best cosmetic mods I did on my car, changed the whole look, I love them!

Originally Posted by Trizin

its actually like inside the light under the plastic. Looks like chalk maybe something during production that wasn't caught.

[Trizin]

Originally Posted by gdgraph

Oh gottcha, and that's exactly what I first thought was that it was chalk (there was some of that on the back of my tail lights that they must have used to label them during production.

I assumed it wasn't chalk because it woulda wiped off when you touched it haha, but makes sense if it got underneath.

Well, once it all gets worked out you'll love them, still one of the best cosmetic mods I did on my car, changed the whole look, I love them!

Yeah i love the look of them they are very nice and clean looking. Being that they are on hyper blue it looks a little unfinished with the break light being red still and gold bowties but im working on that.

[Adrian97c]

Originally Posted by Trizin

Yeah i love the look of them they are very nice and clean looking. Being that they are on hyper blue it looks a little unfinished with the break light being red still and gold bowties but im working on that.

The new ZL1 1LE has the clear 3rd brake light.... the part should be ready for order soon... also DiodeDynamics might be making a smoked 3rd light..

I still have not purchased the clear tails for my hyper blue. I'll buy the tails when I can find then for $300.


Sent from my iPhone using Tapatalk

[gdgraph]

Yeah, I left the 3rd break light because I didn't want issues with inspection if I tinted it, but I used plasti dip on both of my bow ties, it was $5 for a can rather than whatever ridiculous amount they charge for the black bow ties.

Originally Posted by Trizin

Yeah i love the look of them they are very nice and clean looking. Being that they are on hyper blue it looks a little unfinished with the break light being red still and gold bowties but im working on that.

[JeromeS13]

Drove mine at Streets of Willow yesterday with Global Time Attack. Narrowly missed a podium finish by a tenth of a second. Video and pictures coming soon!

[SDG23]

Over the past several days I got my windows tinted. I got 20% on the sides, back and top windshield strip and 35% on the windshield. I had ordered Mosaic Black Metallic hash marks and they came in so my tint guy put them on for me.

Next up is a black front fascia extension and probably the dark tail lamps. Later on I'll get me some MRR 1LE replica wheels.

[JeromeS13]

Here's my fastest lap of the weekend and a screenshot from the Cosworth Toolbox.

[Adrian97c]

Originally Posted by JeromeS13

Here's my fastest lap of the weekend and a screenshot from the Cosworth Toolbox.

What kind of dash cam is that? The HUD is cool


Sent from my iPhone using Tapatalk

[JeromeS13]

Originally Posted by Adrian97c

What kind of dash cam is that? The HUD is cool


Sent from my iPhone using Tapatalk

No dashcam. It's from the onboard Performance Data Recorder.

[Fergy]

Originally Posted by JeromeS13

No dashcam. It's from the onboard Performance Data Recorder.

I guess better question is how did you record the data and then overlay it to the video?

[srcstc]

Originally Posted by Fergy

I guess better question is how did you record the data and then overlay it to the video?

I believe the PDR does it for you.


Sent from my iPhone using Tapatalk