[FlowForm_Wheels]

Originally Posted by Cgocifer

Yours look smaller than the ones pictured above. What size are yours?

Anyone know what size are in the pics above? Look like 21" or 22".

We only produce the FF04 in one size, so every set of FF04's you see on a Camaro will be 20".

[rdoggy]

Originally Posted by FlowForm_Wheels

We only produce the FF04 in one size, so every set of FF04's you see on a Camaro will be 20".

What's the closest you can get to stock 1LE sizes on those? 20x10 ET 20 and 20x11 ET 43

[FlowForm_Wheels]

Originally Posted by rdoggy

What's the closest you can get to stock 1LE sizes on those? 20x10 ET 20 and 20x11 ET 43

They only come in one size/offset for the FF04's. We figured everyone liked the 1LE fitment as GM did a great job from factory making them as wide as possible, so we use a 20x10 ET23 front and 20x11 ET43 rears. The rears are identical, the fronts are 3mm's different in offset, which is about the width of two pennies put together.

[Cgocifer]

Hmmm, is the white car lowered?

[chicagosam]

Since this is turning into a HRE FF04 thread...
FF04 IPA - Stock Size
Crappy Pics but its winter here....

[rdoggy]

Originally Posted by FlowForm_Wheels

They only come in one size/offset for the FF04's. We figured everyone liked the 1LE fitment as GM did a great job from factory making them as wide as possible, so we use a 20x10 ET23 front and 20x11 ET43 rears. The rears are identical, the fronts are 3mm's different in offset, which is about the width of two pennies put together.

This is sounding good. I assume two pennies won't require spacers. I don't see load ratings on the website, do you publish those?

[dakota_c69]

Originally Posted by rdoggy

This is sounding good. I assume two pennies won't require spacers. I don't see load ratings on the website, do you publish those?

Can we get weights too?

[FlowForm_Wheels]

Originally Posted by rdoggy

This is sounding good. I assume two pennies won't require spacers. I don't see load ratings on the website, do you publish those?

Load ratings are put on the mold of the wheels so they'll be embossed on the backside of the wheels. Most important information you really should know is that they're TUV approved and certified for Camaro's, so we're good to go in terms of load ratings and safety certifications.

Originally Posted by dakota_c69

Can we get weights too?

Yes of course, my bad for not seeing this message til now.

FlowForm FF04's:
20x10 ET23 - 24.60lbs
20x11 ET43 - 24.60lbs
Not a typo, they weigh the same

[Ruebernard]

Ho about