Tucson Camaro's

[slickmetal]

Entertaining offers for my ZL1.

Serious Inquires Only. $30K+ in Mods
2013 Black ZL1 - A6 - E85 - 14,2xx miles - Accident free - Non-smoker

Performance:
Have a 624 rwhp and 693 rwhp Dyno Sheets - 554+rwhp on 91
Has combined Lingenfelter and Cordes Performance Racing Kits (Stage 2.5)
- 2.55 Upper Pully
- 11% Lower/Balancer
- Green Belt
- FIC 1000cc Injectors
- Dsteck Flex Fuel Kit
- FORE Fuel System (dual 450/billet filter/FC2 controller)
- Rotofab Cold Air Intake
- Rotofab Big Gulp Scoop
- Rotofab Coolant Reservoir
- Rotofab WW Relocation Kit (Not installed)
- Kooks 1 7/8" Long Tube Headers (No Cats)
- Magnaflow Mufflers
- NGK BR7EF Spark Plugs (Changed in Mar 2016) + 8 more NIB
- MSD Spark Plug Wires
- DOT 4 Brake Fluid
- Custom Tune by Nic D

Wheels:
Savini Signature (SV17) (Chrome) 3pc Forged 20" Rims - Factory specs
Rims have some wear/nothing very visible to naked eye
Goodyear F1 Supercar Tires - (Original Tires)
Replica 18x9.5 Z06 Rims (Gunmetal) wrapped in Nitto 305/45/18 NT555R Drag Radials - Only a few passes (Brand new)

Appearance:
Engine Bay:
American Car Craft (ACC): Chrome Engine Cover, Chrome Perforated Header Plate, Chrome Perforated Plenum Cover, Chrome Shroud, Chrome Wiper Cowl, Inner Fender covers w/ red LEDs, and Chrome Radiator Cover (not installed). All are stainless steel, with minor scratches here and there.
Moroso: Billet (Hand polished) Fuse Box Cover, Billet Oil Catch Can
Drake & Billet Customs: "Camaro" stamped cap set (Radiator, Oil Cap, Dip Stick Handle, Coolant Over Flow, AC Ports, Brake Fluid), Brake Master Cylinder Cover, Custom Chrome "Brembo" stamped ABS Cover, Billet Hood Strut Covers, Chrome "Bowtie" stamped Strut Tower Covers
"ZL1" vinyl hood decal/inlay
Hand polished and cleared strut tower brace (White LED Lit)
Red LED Grill Lighting
Red LED Extra Engine Bay Lighting w/ Custom Switch
GM FlexFuel e85 Ethenol Badge Mounter on Hear Plate

Interior/Trunk:
Lloyd Premium Plush "ZL1" Embroidered Front Floor Mats
ACC "ZL1" Chrome/Billet Door Kick Panels
Custom Billet (thick!) "Camaro" stamped Cup Holder Surround
"ZL1" Laser Etched Acrylic Cup Holder Inserts
Diode Dynamics Red LED Dome Light
"ZL1" Stitched Leather Arm Rest
Custom Red LED Lit Cupholder
Hurst "Autostick" Shifter + Hurst/Camaro Stamped Plate
White LED Front Footwell Lighting
Diode Dynamics Red LED Trunk Light Strip (plugs into stock socket)
Emblem Pros Custom Under Arm Rest Switch Plate
- LED Lit
- Clear Lettering (for lighting) Line Lock, Cutouts, Fans, Aux 1-5
- "ZL1" Etched
- USB Option
Billet Customs Chrome Trunk Latch Plate
Billet Customs Chrome Trunk Strut Covers
Trunk Cargo Net

Exterior:
"Lingenfelter" Hood Badges
Oracle Black "Ghosted" LED Side Markers (have stock markers too)
Diode Dynamics LED License Plate Lights
Billet "E85 Tuned" badge (not installed)
COB Colorshift LED Headlight Halos w/ Remote (The RS headlights still retain factory operation/halo!)
Plasma DRLs and Fogs w/ DRL harness
2x Emplem Pro ZR1 style ZL1 Emblems w/ Carbon Fiber (never installed)
Hurst Equipped Badge (Mounted on Rear, Drivers Side)

Audio:
Kenwood DNN990HD eXcelon 7" Touchscreen w/ WiFi/Bluetooth/Nav
Customized to retain factory USB in Armrest.
Voice Activation
Metra Dual Din Dash Kit w/ Controls
JL Audio 10" Sub
******** Wheelwell Stealth Sub Box
JL Audio 750w Monoblock Amp (Custom mounted near battery)
Subwoofer Controller
Front and Rear Cameras (Rear Camera on Reverse on Screen)

I have service records and just about every receipt for everything. Interior is in great conditions. No tears etc in leather/alcontera
The car is hard wired for an Escort SmartRadar (Android) w/ interface device mounted by the steering wheel. The actual box was stolen.
Minor to no dents on the body. At a certain angle you can tell a door tapped the passenger side, that's about it. The drivers side rock guard needs some work as it scraps getting out of my driveway at times.
Car has a line lock installed, but is currently not working and i'm troubleshooting it.
I have 3x Keys. One with functioning switch blade, second modified and third w/ no remote.
Has a car show stand ready to go with it as well. More picture upon request

[Bodih]

Originally Posted by Transformed

I need help (no comments ��). Thinking I need to replace my almost 4 year battery before I end up stranded somewhere. What's a good choice?

These cars need a ton of cranking amps, so make sure you get the right one. Might check with O'Reilly Chevrolet and see how much with the club discount.

[nvldojr]

Hello everyone, recently bought long tube headers and need help finding someone experienced enough to help install. Will pay and can provide a few cold ones

Or someone that can refer, recommend a local shop that wont cost me an arm would greatly appreciate it.

[mar10]

Originally Posted by nvldojr

Hello everyone, recently bought long tube headers and need help finding someone experienced enough to help install. Will pay and can provide a few cold ones

Or someone that can refer, recommend a local shop that wont cost me an arm would greatly appreciate it.

Its not hard to do as long as you have a decent pair of headers with good fitment and decent tools. You basically remove the dipstick and unbolt the bolts holding the exhaust manifold. Then you lift the header up from under the car and bolt it on.

If you don't feel comfortable doing it yourself I might be able to help you out of your willing to drive to Benson.

[FLYNNZL1]

Hello Everyone,
This month’s meeting is Thursday, April 14th at Firehouse Subs at Thornydale and Orange Grove. We will park behind Firehouse with the Freddy’s Cruise-in folks. We normally gather around 5:30, eat about 6:00, and pass on information shortly after. Please come out and join us and tour the cruise-in car show!
3844 W River Rd #110, Tucson, AZ 85741

[gotroost]

If anyone has some laying around, I might be interested. I think I have toasted mine with a cam, headers, and hi flo cats. Got some new rattles and they seem to be in the stock cans.

Love the current sound and don't want it too loud, but would be open to suggestions about an aftermarket that is close to stock. Mine is currently friendly as a DD and on the highway, but will scare kids and small animals at WOT.

BTW - mine survived the dreaded oil pump failure. Started in the garage and got the no oil pressure warning. Melling pump and Katech timing chain installed and no issues so far. Should have done this with the cam install. Only 18K on the car so far and 13K after the cam install.

[4510]

Originally Posted by gotroost

If anyone has some laying around, I might be interested. I think I have toasted mine with a cam, headers, and hi flo cats. Got some new rattles and they seem to be in the stock cans.

Love the current sound and don't want it too loud, but would be open to suggestions about an aftermarket that is close to stock. Mine is currently friendly as a DD and on the highway, but will scare kids and small animals at WOT.

BTW - mine survived the dreaded oil pump failure. Started in the garage and got the no oil pressure warning. Melling pump and Katech timing chain installed and no issues so far. Should have done this with the cam install. Only 18K on the car so far and 13K after the cam install.

Not sure what your question is... If you are looking for factory mufflers I have some... only 2500 miles on them before I pulled them. I am in Sierra Vista as well.

[4510]

Originally Posted by 4510

Not sure what your question is... If you are looking for factory mufflers I have some... only 2500 miles on them before I pulled them. I am in Sierra Vista as well.

Apparently I am mistaken. I checked the shed and the mufflers are not there. Sorry....

[gotroost]

Bummer - I would really love a set of low mileage stock mufflers. Got my car up on stands today and one of them seems to be coming apart from the inside.

[FLYNNZL1]

Hello everyone,
This month's meeting will be Thursday,May 12th, at Fuddruckers, 6118 E Speedway Blvd, Tucson, AZ 85712. We'll eat at 6PM, and discuss meeting notes right after.

[Bradley]

Originally Posted by gotroost

Bummer - I would really love a set of low mileage stock mufflers. Got my car up on stands today and one of them seems to be coming apart from the inside.

I got some, I don't remember how many miles are on them. the are for an automatic, if they are the same.

[FLYNNZL1]

Thank you to everyone that came out tonight to Fuddruckers. What a great turnout, I did not get a count but we were close to twenty, including new members Chris, Trish, and Ashley. This Saturday whoever would like to come, we are meeting at QT on I-10 & Cortaro at 2:00, then we are heading to the Scottsdale Pavilions for the Car show there. The Arizona Camaro Club will hold spots for us, so please let me know asap if you would like to join us. If you have never been to this every Saturday night show, it has many different cars, including rare types, and classics. The next event coming up is the Mt Lemmon Cruise with the Arizona Camaro Club on the 18th of June, see the link below for more information. We will have other meetups coming up as well. If you would like to plan an event or meetup, please let me know.
Thank you, Sean

[FLYNNZL1]

Hello everyone,
Mt. Lemmon Fun Run & Lunch
Phoenix Camaro's is hosting this event. Please click going if you are going including Sierra Vista crew. we need a head count asap for the restaurant. This is a great way to escape the heat in June.
Here is the itinerary:
6:45 meet up at On the Border I10 & Ray Road
7:15 pull out
8:15 Picachu Peak (for the ones that can't hold it)
8:45 pull out
(Tucson Meetup) 9:45 Madera Village Shopping Center 9075 E. Tanque Verde Road - we'll meet up with the Tucson area Clubs there
10:15 pull out
11:30 lunch at Iron Door
Here is the Facebook link:
https://www.facebook.com/events/1126740984014782/

Thank you, Sean

[Bodywerks]

Sounds like fun, but I work that day :/