Wicker bill now for the stock SS spoiler - Page 2

CruzySS · 08-05-2017, 01:52 PM

Please don't make or sell these!

Soleil · 08-05-2017, 02:53 PM

Excuse me but this is an absolute "no go"

Spoiler

Gunsmokez · 08-05-2017, 05:12 PM

Ordered 10

Wheel Team 6 · 08-05-2017, 05:19 PM

Quote:

Originally Posted by CruzySS

Please don't make or sell these!

+1

Eric SS · 08-05-2017, 05:22 PM

I'm sorry, I love your rock guards but this is definitely not my cup of tea, and I'm trying to be as nice as possible.

Curr · 08-05-2017, 05:23 PM

Not my thing but if someone else likes it, more power to 'em.

And I own your jacking pads, great stuff.

cooden · 08-06-2017, 06:17 AM

This is just plain hideous.

UK Basketball Rocks · 08-06-2017, 07:41 AM

Quote:

Originally Posted by cooden

This is just plain hideous.

Yep that thing is a fail!

BFella · 08-06-2017, 05:08 PM

Yeah, you should listen to everyone and probably rethink this design. Make it go all the way down and cover the holes, because at this point, it's disgusting and wasn't well thought out at all.

Skylane765 · 08-29-2017, 06:21 PM

The one car you see with the CF spoiler is the ACS spoiler with our wicker bill. It is not the stock SS spoiler. We also make a wicker bill for the smaller blade spoiler that is coming with some of the new 17s and 18s its some what like the blade spoiler but shorter in length.

Skylane765 · 08-29-2017, 06:27 PM

Quote:

Originally Posted by BFella

No no no no. You need to cover the exposed parts? It's supposed to run from the top to the deck lid. yikes.

No, you would not want it to be below the bottom of the spoiler. That will just not look right. The spoiler is raised so no need to block air going below it. We just make the wicker bill for this wing the way the customer wanted it. we can make them any way a customer wants it to be. Its easy to cover the lower part of the spoiler by just using the standard wicker bill, it fits and will cover it. No one wanted it to be covered. We make what customers want, not all items fit thee ideas of every one out there. So we make many types to pick from.

Johnwon · 08-29-2017, 06:48 PM

all that I envision with that exposed hardware is rust streaks on my bumper after a good rain down here in humid Florida. I don't like the looks from the rear at all.

Sledgehammer70 · 08-29-2017, 06:50 PM

Quote:

Originally Posted by Johnwon

all that I envision with that exposed hardware is rust streaks on my bumper after a good rain down here in humid Florida. I don't like the looks from the rear at all.

The joys of stainless steel, no rust. I am not a fan of the wicker on the stock spoiler, but hey some people like it.

Skylane765 · 08-29-2017, 06:52 PM

Quote:

Originally Posted by Johnwon

all that I envision with that exposed hardware is rust streaks on my bumper after a good rain down here in humid Florida. I don't like the looks from the rear at all.

Its stainless steel hardware, it can not rust!!! I am not a fan of many things owners buy, but if it works and enough customers want them we will make it, we were getting many calls for the wicker bill on the stock spoiler. Most front splitter extensions are just making more uplift rather than down force because they are not set up correctly. We have customers putting the wicker bill on the stock ZL1 6th gen spoiler, now that I would not think most would do. The first wicker for the stock spoiler was to only be a gurney lip and one piece, but you guys wanted it bigger and 2 piece, so we made it and sell many of them.

08-05-2017, 02:53 PM	#16
Soleil Drives: Camaro 50th anniversary edition Join Date: May 2017 Location: Europe Posts: 2,203 View My Garage	Excuse me but this is an absolute "no go" Spoiler __________________ Soleil _____________________________________________ A car is fast enough, if you fear to unlock it in the morning." (Walter Roehrl)

08-05-2017, 05:23 PM	#20
Curr Probably doesn't like you Drives: 2022 WCT ZL1 M6 Join Date: Jun 2015 Location: Boston-ish Posts: 1,240	Not my thing but if someone else likes it, more power to 'em. And I own your jacking pads, great stuff. __________________ I hope the 6th gen Camaro has a melodious horn trumpet. I'll tootel it at the ladies, yelling out "Hi hi." - RenegadeXR كافر ΜΟΛΩΝ ΛΑΒΕ железобетонное очко Quod gratis asseritur, gratis negatur. There is an unequal amount of good and bad in most things, the trick is to work out the ratio and act accordingly.

08-06-2017, 06:17 AM	#21
cooden Drives: '16 Camaro 2SS & '15 Durango R/T Join Date: Jul 2016 Location: Rochester, NY Posts: 505	This is just plain hideous. __________________ '16 2SS: Summit White/Adrenaline Red/A8/Whipple Supercharger/ARH Longtube Headers/Corsa Xtreme Exhaust/Roto-Fab Cold Air Intake/Eibach Pro Kit/M228 Wheels/Lots of GM Accessories

08-06-2017, 05:08 PM	#23
BFella Drives: 16' Supercharged 1SS Join Date: Apr 2014 Location: Scottsdale, AZ Posts: 650	Yeah, you should listen to everyone and probably rethink this design. Make it go all the way down and cover the holes, because at this point, it's disgusting and wasn't well thought out at all. __________________ My Build Thread 760RWHP Magnuson 1SS

08-29-2017, 06:21 PM	#24
Skylane765 Drives: ZL1-1LE, Z/28 Join Date: May 2012 Location: San Diego Posts: 3,262 View My Garage	The one car you see with the CF spoiler is the ACS spoiler with our wicker bill. It is not the stock SS spoiler. We also make a wicker bill for the smaller blade spoiler that is coming with some of the new 17s and 18s its some what like the blade spoiler but shorter in length. Attached Images Last edited by Skylane765; 08-29-2017 at 06:38 PM.

08-05-2017, 01:52 PM	#15
CruzySS Drives: 2016 Camaro 2ss Join Date: May 2017 Location: Annandale MN Posts: 588 View My Garage	Please don't make or sell these!

08-05-2017, 05:12 PM	#17
Gunsmokez Drives: 1LE Join Date: Jul 2016 Location: earth Posts: 94	Ordered 10

08-05-2017, 05:22 PM	#19
Eric SS #becauseracecar Drives: 2016 SS Sedan, 2016 Camaro SS Join Date: May 2015 Location: Phoenix Posts: 2,959	I'm sorry, I love your rock guards but this is definitely not my cup of tea, and I'm trying to be as nice as possible.

08-29-2017, 06:48 PM	#26
Johnwon Drives: 2016 Mosaic Black 2SS, NPP, A8. Join Date: Jun 2016 Location: Jacksonville, FL Posts: 285	all that I envision with that exposed hardware is rust streaks on my bumper after a good rain down here in humid Florida. I don't like the looks from the rear at all.

User Name		Remember Me?
Password