[Zzzato]

Hey guys and gals,
It's been 5 years since I sold my 2017 1ss for a minivan and I can proudly say I'm back in a 2024 1ss. My 2017 had a slightly different trunk setup so I'm here to get some folks guidance.
Back in 2017 I followed this thread https://www.camaro6.com/forums/showt...=459430&page=6
and did my setup very similar by tapping into the factory amp and add my own 4 channel amp to amplify my factory speakers using an lc7i in the trunk. Now my 2024 doesn't seem to have a factory amp I can tap into to amplify my factory speakers from the trunk. Am I wrong?
I really don't want to start prying off panels to replace speakers and such so I'm curious if anyone's threw an amp into their factory setup on the new models? Thanks.

[keep_hope_alive]

I detail the schematics for our cars in my build log (link in sig). You can easily intercept the factory wiring with a harness to allow for external amplifiers. But you will need to remove panels to run wiring since the head unit interface is in the passenger side dash.

[Zzzato]

Thank you for doing this! So from what it appears, they moved the factory amp from the trunk to the dash in the last few years, unfortunately. That makes things a little more of a pain in the butt.