Anybody have this splitter? Need some info - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Ron_MA · 05-04-2016, 11:49 AM

Any pics or info regarding this is appreciated ! Good or bad .

Trifecta23 · 05-04-2016, 12:32 PM

I dont have that one in particular, but it looks like the stock ZL1 or the special edition splitters(like mine). It changes the look of the front end of your car for the better. If mine didnt come with it, it would have been my first mod.

matthew9440 · 05-04-2016, 02:43 PM

Any splitter is better than no splitter IMO. I like an aggressive look. I have seen this style before. Its the perfect amount of style. not too bold or out there. Looks factory!

jcampos · 05-04-2016, 04:33 PM

Looks good to me but does it come with installation hardware? If not, then where do you but the hardware at?

SandEngXp · 05-04-2016, 10:09 PM

Says it comes with hardware but needs painting on the duraflex site. I am curious about contiur fit up and general surface finish. anyone bought one

MSull16 · 05-04-2016, 10:14 PM

Id like to fit that and side skirts in satin black if anyone knows a good place to find them.

Extreme Dimensions · 05-19-2016, 05:24 PM

if you guys have any questions or need any pricing please let me know!

My 3rd Camaro · 05-21-2016, 08:35 AM

Just put it on last week. It does come with mounting hardware. You have to purchase the two sided tape though. Wasn't hard. You do need to remove the plastic screws holding on the air dam on the bottom to mount it. I put on weather stripping to make it look better as you can see in the last picture. It didn't quite fit up against the sides and you can see where the two sided tape is showing.
It did come with a hole in it the size of a head of a screw. I just filled and painted it flat black myself. It's withstood 85mph on the highway so it's good but just for looks.

My 3rd Camaro · 05-23-2016, 07:02 AM

I'm starting to have problems with it staying on now. Where I put the two sided tape on it's pulling away from the body. This will be the second time I've worked on it in a week. I may have to put more body filler on sections that you put the tape on to bring it closer to the body.
It's only happening on the drivers side.

Shawno72 · 05-23-2016, 07:49 AM

It looks similar to my factory GM splitter. Mine is color matched tho

MCSarge · 05-23-2016, 09:15 AM

Quote:

Originally Posted by My 3rd Camaro

I'm starting to have problems with it staying on now. Where I put the two sided tape on it's pulling away from the body. This will be the second time I've worked on it in a week. I may have to put more body filler on sections that you put the tape on to bring it closer to the body.
It's only happening on the drivers side.

I put 10 bolts in when I mounted mine. Replaced the nuts they sent me with nylock nuts and added a washer on the top and bottom. It has been really solid. Might want to consider adding a few more bolts and not rely on the double faced tape. Good luck on your fix.

derek1387 · 05-23-2016, 09:58 AM

Duraflex?

Gross.

The Patriot · 05-23-2016, 11:22 AM

Quote:

Originally Posted by derek1387

Duraflex?

Gross.

Yep, the fit of that splitter is terrible. Weatherstripping, really?????

KillboyPowerhead · 05-23-2016, 11:57 AM

Hey Shawno72, when you say factory GM splitter, is that the ZL1 one? Or is there another? Do you know the part number of the one you ordered?

05-04-2016, 11:49 AM	#1
Ron_MA Drives: 2014 AGM Trifecta Tuned V6 Join Date: Apr 2015 Location: MA Posts: 239	Anybody have this splitter? Need some info Any pics or info regarding this is appreciated ! Good or bad . Attached Images

05-04-2016, 12:32 PM	#2
Trifecta23 Drives: 2013 Dusk 2ss/RS conv. Join Date: Jul 2015 Location: Western Illinois Posts: 281 View My Garage	I dont have that one in particular, but it looks like the stock ZL1 or the special edition splitters(like mine). It changes the look of the front end of your car for the better. If mine didnt come with it, it would have been my first mod. __________________ 2013 Dusk Camaro/Convertible/2SS RS/6 Speed Auto/One of Sixty Nine

05-04-2016, 02:43 PM	#3
matthew9440 Drives: 2010 Camaro 2SS/RS Join Date: Aug 2012 Location: DuBois, PA Posts: 1,038 View My Garage	Any splitter is better than no splitter IMO. I like an aggressive look. I have seen this style before. Its the perfect amount of style. not too bold or out there. Looks factory! __________________

05-19-2016, 05:24 PM	#7
Extreme Dimensions Drives: 2016 1ss Camaro Join Date: May 2016 Location: Fullerton, CA Posts: 943	if you guys have any questions or need any pricing please let me know! __________________ Andrew Bettridge Account Manager Extreme Dimensions 1-714-278-8000 EXT 17 andrew.bettridge@extremedimensions.com

05-21-2016, 08:35 AM	#8
My 3rd Camaro Drives: 2015 Camaro LS, 2000 Firebird Join Date: Jun 2015 Location: Zionsville, Indiana Posts: 21 View My Garage	Just put it on last week. It does come with mounting hardware. You have to purchase the two sided tape though. Wasn't hard. You do need to remove the plastic screws holding on the air dam on the bottom to mount it. I put on weather stripping to make it look better as you can see in the last picture. It didn't quite fit up against the sides and you can see where the two sided tape is showing. It did come with a hole in it the size of a head of a screw. I just filled and painted it flat black myself. It's withstood 85mph on the highway so it's good but just for looks. Attached Images

05-04-2016, 04:33 PM	#4
jcampos Drives: 2014 Chevy Camaro SS Join Date: Dec 2014 Location: San Antonio Posts: 821	Looks good to me but does it come with installation hardware? If not, then where do you but the hardware at?

05-04-2016, 10:09 PM	#5
SandEngXp Drives: 2015 Camaro LS+, 2013 Avalanche LTZ Join Date: Jul 2015 Location: Arlington, Texas, USA, Earth Posts: 13 View My Garage	Says it comes with hardware but needs painting on the duraflex site. I am curious about contiur fit up and general surface finish. anyone bought one

05-04-2016, 10:14 PM	#6
MSull16 Drives: '10 Camaro SS LS3 Join Date: Feb 2016 Location: Marlyand/DC Posts: 245	Id like to fit that and side skirts in satin black if anyone knows a good place to find them.

05-23-2016, 07:02 AM	#9
My 3rd Camaro Drives: 2015 Camaro LS, 2000 Firebird Join Date: Jun 2015 Location: Zionsville, Indiana Posts: 21 View My Garage	I'm starting to have problems with it staying on now. Where I put the two sided tape on it's pulling away from the body. This will be the second time I've worked on it in a week. I may have to put more body filler on sections that you put the tape on to bring it closer to the body. It's only happening on the drivers side.

05-23-2016, 07:49 AM	#10
Shawno72 Drives: 2015 Black 2LT RS M6 Join Date: Aug 2015 Location: Cali Posts: 2,033	It looks similar to my factory GM splitter. Mine is color matched tho __________________ Overkill tune/E85/80mm•CAI cold air intake w/my custom maf tube•Apex air scoop•JacFab ported intake/Extendolater•Vitesse•EE EX2 catch can•Innovate wideband•ARH HFC's•NPP exhaust•11386 xpipe•Brembos/cross drilled/slotted rotors•SS M/C•Pfadt 1.25 springs•1LE struts/sways/strut tower brace•BMR diff bush, trail arms/bush, adj toe links•My custom Tunnel brace•Hurst short throw shifter•JDP stage 1 clutch res•1LE steering wheel, shift boot•ZL1 rear diffuser/splash guards•GM splitter•Z/28 grille/flowtie/spoiler/wheels•GM performance pedals•"Chevrolet" door sills•10" Kicker sub•BigWorm overlays

05-23-2016, 09:58 AM	#12
derek1387 Drives: 2015 1LS Red V6 Join Date: Aug 2015 Location: St Joseph, MO Posts: 1,849	Duraflex? Gross. __________________ Sponsors: Overkill Motorsport BCS Auto JacFab Machining APDEG Dream Gear Mobile Audio Thanks to Will @ Overkill Motorsports, Jason @ JacFab, Jim @ Ohio Speed, Brandon at Dream Gear, and the boys at Randy Curnow Chevrolet 5th Gen V6 Performance Facebook Group

05-23-2016, 11:57 AM	#14
KillboyPowerhead Drives: 2015 Z/22 Join Date: Aug 2015 Location: Ontario, Canada Posts: 931	Hey Shawno72, when you say factory GM splitter, is that the ZL1 one? Or is there another? Do you know the part number of the one you ordered?