07-11-2016, 06:49 PM | #1 |
Drives: 2010 2SS/RS L99 IBM silver stipes Join Date: Dec 2015
Location: K.C. Kansas
Posts: 1,329
|
ZR1 wheels?
Will 17" ZR1 wheels fit on the 2010 SS?
__________________
2010 Imperial Blue w/ Silver stripes 2SS/RS L99
Mods = Not enough.... |
07-12-2016, 01:55 AM | #2 |
Drives: 2010 2SS/RS L99 IBM silver stipes Join Date: Dec 2015
Location: K.C. Kansas
Posts: 1,329
|
Anyone?
__________________
2010 Imperial Blue w/ Silver stripes 2SS/RS L99
Mods = Not enough.... |
07-12-2016, 11:59 PM | #3 |
Drives: '10 Inferno Orange SS Join Date: Feb 2015
Location: San Diego
Posts: 74
|
Do you mean the C4 ZR1 rims? Not sure if the fat Camaro SS front Brembo caliper with pads would clear.
On a side note, if you are talking C4 vette rims, why? they were almost front wheel drive looking. I am a C4 fan, so if you have 84-95 vette questions, I can probably answer them. Good luck. -Tony |
07-13-2016, 01:56 AM | #4 |
Drives: 2010 2SS/RS L99 IBM silver stipes Join Date: Dec 2015
Location: K.C. Kansas
Posts: 1,329
|
I think they are C4. They are black and on an '02 Trans Am.
__________________
2010 Imperial Blue w/ Silver stripes 2SS/RS L99
Mods = Not enough.... |
07-13-2016, 04:29 PM | #5 |
YOLO Z/28
Drives: 2014 Z/28 Join Date: May 2016
Location: Bowling Green, KY
Posts: 195
|
If it clears your Brembos, you're still off on the bolt pattern. The 5th gen and newer Camaros are 5x120mm whereas the vette wheels and older F-body is standard (5x4.75").
__________________
2014 Red Hot Z/28, CTF car #39/69. HCI, Supercharged, boltons.
2006 SRM GTO, exhaust, VMR V701 wheels (SOLD) 2002 Bright Red Trans Am WS6: HCI, exhaust, tune, Konis, UMI sways, LCAs, Track bar, STB, 2" boxed steel SFCs (SOLD) |
07-16-2016, 10:31 AM | #6 |
Drives: 2015 BVM 1SS/1LE Join Date: Aug 2010
Location: United States of America
Posts: 457
|
I have 18 inch rims on my Camaro, and even with those I had to replace the brake pads on the front with a set that did not have the weights on the back for them to fit. I don't think a 17 inch set will fit without some major modifications. Not to mention the bolt pattern difference described above. I would look into other options. Those rims you are talking about will not be easy to swap to no matter how you look at it.
|
|
|
|
|