12-11-2017, 01:35 PM | #1 |
Drives: Mosaic Black ZL1 M6 Join Date: Jun 2017
Location: SOUTHERN CALIFORNIA
Posts: 118
|
Eibach and Moreno camber plates
Anyone running both that can post a pic and feedback?
|
12-11-2017, 10:53 PM | #2 |
Drives: 2016 Colorado Join Date: Aug 2015
Location: Texas
Posts: 92
|
__________________
2017 ZL1 - A10, PDR - Delivered - 5/2/2017
- 05/10/2017 - Tail lights to SEMA dark tails lights - 05/16/2017 - Tint, paint correction, matte hood, Xpel, Ceramic coat - 11/19/2017 - Diode Dynamics F/R side markers to smoke, reverse, trunk, and license plate LED swap, rear reflectors tinted charcoal - 04/20/2018 - MRR FS01 Brushed Bronze Wheels, Michelin Pilot Sport Cup 2 tires, Carbotech XP12 F/R Brake Pads, Castrol SRF Brake Fluid 2002 SS 1986 IROC Z28 |
12-12-2017, 04:04 AM | #3 |
@fast4vavlezl1@lt4_nation
Drives: 2018 ZL1 1LE Join Date: Dec 2016
Location: SoCal
Posts: 93
|
Don’t have camber plates, but I’m running Eibach prokit. Lowered the car perfect
Sent from my iPhone using Tapatalk |
12-12-2017, 04:24 PM | #4 |
Drives: 2016 Colorado Join Date: Aug 2015
Location: Texas
Posts: 92
|
__________________
2017 ZL1 - A10, PDR - Delivered - 5/2/2017
- 05/10/2017 - Tail lights to SEMA dark tails lights - 05/16/2017 - Tint, paint correction, matte hood, Xpel, Ceramic coat - 11/19/2017 - Diode Dynamics F/R side markers to smoke, reverse, trunk, and license plate LED swap, rear reflectors tinted charcoal - 04/20/2018 - MRR FS01 Brushed Bronze Wheels, Michelin Pilot Sport Cup 2 tires, Carbotech XP12 F/R Brake Pads, Castrol SRF Brake Fluid 2002 SS 1986 IROC Z28 |
12-12-2017, 07:59 PM | #5 |
Drives: Mosaic Black ZL1 M6 Join Date: Jun 2017
Location: SOUTHERN CALIFORNIA
Posts: 118
|
Heard that the chamber plates would drop the front a lil more. I want the front to sit a bit lower
|
12-12-2017, 10:27 PM | #6 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
That's an awesome stance. Just killer
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
12-13-2017, 01:35 PM | #7 |
Drives: C4,C6 Z06,Silverado,'17 Red Hot ZL1 Join Date: Aug 2016
Location: SoCal
Posts: 463
|
|
12-13-2017, 05:15 PM | #8 |
@fast4vavlezl1@lt4_nation
Drives: 2018 ZL1 1LE Join Date: Dec 2016
Location: SoCal
Posts: 93
|
|
12-13-2017, 05:16 PM | #9 |
@fast4vavlezl1@lt4_nation
Drives: 2018 ZL1 1LE Join Date: Dec 2016
Location: SoCal
Posts: 93
|
|
12-13-2017, 07:21 PM | #10 |
Drives: 16 2SS 6MT NPP MRC / 15 K1300S Join Date: Mar 2016
Location: NW of Austin
Posts: 1,034
|
They will drop another 1/2" if you omit a spacer. I think that's too much. Wish there were two spacers for a 1/4" or 1/2" option.
__________________
Rohana RFX-5 10/11, M/T 275/305, Eibachs, Hellwigs, Hurst SS, DMS LT4 SC 596HP/589TQ, DMS Low-side, Kooks 2LTs, MBRP Race, Rotofab, MMS CC |
|
|
Post Reply
|
|
|