[Exportedafrican]

I figured I would give back since I ask a bunch of questions..

If anyone is looking to replace the stock clutch line with braided stainless you have some options.

After spending half the day at summit racing I found a part that will let you create your own AN line between the master cylinder and the slave cylinder.

Full details are here:
http://www.exportedafrican.com/wordp...-braided-line/

Unfortunately I am not familiar with the components on the master side but this should hopefully help someone with the harder to see side. Thankfully GM reused the fitting but very little is written about it.



~J