Ready to put in my Exhaust on Saturday!! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ToolFan66 · 04-09-2015, 07:30 PM

Finally have a reason to use my new Stands...

Will be installing my Kooks headers and Borla catback...

ToolFan66 · 04-09-2015, 07:31 PM

Pic 2

Homeless Man · 04-09-2015, 07:42 PM

Lol that's the first time I see stands like that. And I can't wait to get those rims.

SuperSport2011 · 04-09-2015, 08:07 PM

Congrats, car looks real nice.

QmaroSS · 04-09-2015, 08:16 PM

Very cool! BTW, what stands are those? And where would I get them?

ToolFan66 · 04-09-2015, 08:21 PM

I built them at the shop out of 11ga steel, welded 100%, and powder coated..

I like them better then Jack stands, much safer IMO, was never a fan of being under a car with Jack stands..

GAFreddy · 04-09-2015, 08:23 PM

Nice car, and sweet stands! Post some vids of the completed product when you're done. I'm curious to see what that combo sounds like and how difficult the install is.

ToolFan66 · 04-09-2015, 08:28 PM

Will do, personally I think the passenger side exhaust manifold, and O2 sensors will be the only problem areas..

760bowtie · 04-09-2015, 08:35 PM

There's money to be made from those stands. I'd use them over jack stands too.

Red2014SS · 04-09-2015, 08:44 PM

That is a beautiful car!! .. Anxiously waiting on your thread about the install.

ZOOK · 04-09-2015, 08:46 PM

Did mine a few years back lots of room for things .

i'v had mine off 4 times ...I spray the rubbers with a spray wax (lucas ) and it makes things come apart much easier.

yamhenliu · 04-09-2015, 08:56 PM

I like them better then Jack stands, much safer IMO

ZOOK · 04-09-2015, 09:01 PM

Quote:

Originally Posted by yamhenliu

I like them better then Jack stands, much safer IMO

x2

ToolFan66 · 04-10-2015, 05:40 AM

Quote:

Originally Posted by Red2014SS

That is a beautiful car!! .. Anxiously waiting on your thread about the install.

Thanks!! I'm anxious as well..

04-09-2015, 07:30 PM	#1
ToolFan66 Drives: 2011 2SS 6.2L W/RS package Join Date: Jan 2011 Location: Colorado Posts: 3,008	Ready to put in my Exhaust on Saturday!! Finally have a reason to use my new Stands... Will be installing my Kooks headers and Borla catback... Attached Images __________________ KooKs LT Headers, Borla S-Type cat back, RotoFab CAI, Bo White PTB, RMCR tune...

04-09-2015, 07:31 PM	#2
ToolFan66 Drives: 2011 2SS 6.2L W/RS package Join Date: Jan 2011 Location: Colorado Posts: 3,008	Pic 2 Attached Images __________________ KooKs LT Headers, Borla S-Type cat back, RotoFab CAI, Bo White PTB, RMCR tune...

04-09-2015, 07:42 PM	#3
Homeless Man Homeless Life Chose Me Drives: LS3 (sold 4/21) Join Date: Nov 2014 Location: Streets of Philly Posts: 3,650	Lol that's the first time I see stands like that. And I can't wait to get those rims. __________________ Pity a man in familiar places, who yet feels like a stranger.

04-09-2015, 08:07 PM	#4
SuperSport2011 Drives: 2011 camaro 2ss/rs rally yellow L99 Join Date: Nov 2011 Location: Toronto Posts: 956 View My Garage	Congrats, car looks real nice. __________________ - Airaid cold air intake - Kooks 1 7/8 long tube headers - Kooks high flow cats - Borla atak 2.5" cat back exhaust - Dyno tune - AFM delete - 94 octane tune - Vitesse paddle shifters - Blacked out rims - Costum painted engine cover - T3 stripes - GM locking gas cap

04-09-2015, 08:16 PM	#5
QmaroSS No regrets the red one! Drives: 2012 Victory Red 2SS Join Date: Jun 2012 Location: Dallastown, PA Posts: 482 View My Garage	Very cool! BTW, what stands are those? And where would I get them? __________________ StainlessWorks LT (JetHot Coating) + HFC + Performance Connect, 3" SW Retro Cat-back, Roto-Fab CF CAI, Bo White PO TB, R1Concepts Drilled-Slotted Rotors, Hawk Ceramic Pads, AirLift Performance 3H suspension, MPD1 Rear Spoiler, Heritage Grill w/ Red SS Sparks Emblem, SLP Front Splitter, NightOwl V2 Halo Kit, Roto-Fab Red Engine cover w/ CF Plenum & Fuse Box Cover

04-09-2015, 08:21 PM	#6
ToolFan66 Drives: 2011 2SS 6.2L W/RS package Join Date: Jan 2011 Location: Colorado Posts: 3,008	I built them at the shop out of 11ga steel, welded 100%, and powder coated.. I like them better then Jack stands, much safer IMO, was never a fan of being under a car with Jack stands.. __________________ KooKs LT Headers, Borla S-Type cat back, RotoFab CAI, Bo White PTB, RMCR tune...

04-09-2015, 08:23 PM	#7
GAFreddy Account Suspended Drives: 2010 2SS & 2013 ZL1 Vert Join Date: Mar 2015 Location: Watching Airplanes Takeoff Posts: 348	Nice car, and sweet stands! Post some vids of the completed product when you're done. I'm curious to see what that combo sounds like and how difficult the install is.

04-09-2015, 08:28 PM	#8
ToolFan66 Drives: 2011 2SS 6.2L W/RS package Join Date: Jan 2011 Location: Colorado Posts: 3,008	Will do, personally I think the passenger side exhaust manifold, and O2 sensors will be the only problem areas.. __________________ KooKs LT Headers, Borla S-Type cat back, RotoFab CAI, Bo White PTB, RMCR tune...

04-09-2015, 08:35 PM	#9
760bowtie Drives: 2014 1SS/RS, 2018 Silverado CC Join Date: Apr 2014 Location: Oceanside, CA Posts: 1,487	There's money to be made from those stands. I'd use them over jack stands too.

04-09-2015, 08:44 PM	#10
Red2014SS Drives: 2014 2SS/RS Camaro Join Date: Dec 2014 Location: Kentucky Posts: 2,421	That is a beautiful car!! .. Anxiously waiting on your thread about the install. __________________ 2014 2SS/RS, L99, SW LTH w/HF Cats, GMPP Ex. Z/28 CAI, FR41s in PVD Black Chrome, Recaros, Pfadt Sway 377hp, 383tq 12.739@110.44 MPH

04-09-2015, 08:46 PM	#11
ZOOK Drives: 2010 2ss 6 speed Join Date: Apr 2011 Location: NEW BRUNSWICK CANADA Posts: 328	Did mine a few years back lots of room for things . i'v had mine off 4 times ...I spray the rubbers with a spray wax (lucas ) and it makes things come apart much easier.

04-09-2015, 08:56 PM	#12
yamhenliu Drives: bmw Join Date: Apr 2015 Location: x5 Posts: 4	I like them better then Jack stands, much safer IMO