What did you do to your 6th Gen Camaro today?! - Page 328

Pito2ss · 02-04-2018, 12:40 AM

Quote:

Originally Posted by torqueaddict

Nice, like the color.

Soleil · 02-04-2018, 06:56 AM

I removed my steering wheel and sent it to upholster. I will have a 12h Mark more defined thumb area and 5mm thicker.

Doug kj6aco · 02-04-2018, 05:25 PM

Installed GM Blackout strip between taillights, 2018 model had it on and had to have it.

Bad Anvil Garage · 02-05-2018, 09:32 AM

Quote:

Originally Posted by Soleil

I removed my steering wheel and sent it to upholster. I will have a 12h Mark more defined thumb area and 5mm thicker.

Please post pics when you get it back.

treborcj · 02-05-2018, 11:49 AM

Added a tinted license plate cover

driven2exceSS · 02-05-2018, 04:53 PM

Quote:

Originally Posted by Cgocifer

Had to pull it out of the garage today, so got it a little dirty and took the pics on the stock wheel set-up with the new BMR's. Once the warmer weather comes I bet the springs will have settled a little more, AND it will look sooooo much better back on the new MRR's w/ SC 3's!!!

chiefmg · 02-05-2018, 06:37 PM

Got her registered/licensed today. Bought a slim black frame for it and then had to go to three different places looking for some nylon screws. Some time since my last purchase of these, they stopped making the nuts with flanges. This means they don't cover the holes on either the plate of the frame. Finally found some that will work at O'Reilly's. What I do is install them at the bottom of the frame in reverse so the head is next to the body. I put some silicone on the heads so the body is protected, this also keeps it from rattling. I'll have to see what GM used for inserts for the attachment screws, I may have to cut a piece of rubber I have to put at the top of the plate so it doesn't abrade the paint.

Cgocifer · 02-05-2018, 09:02 PM

Quote:

Originally Posted by driven2exceSS

Had to pull it out of garage today, so got it a little dirty and took the pics on the stock wheel set-up with the new BMR's. Once the warmer weather comes I bet the springs will have settled a little more, AND it will look sooooo much better back on the new MMR's w/ SC 3's!!!

Looks good

Tazz3069 · 02-08-2018, 04:38 PM

New Scorpion hood is almost done. They just need to polish now.

Badger 4 · 02-09-2018, 08:50 PM

Looked at it while I started our snowblower to clear our driveway. Looked at it again while I parked the snowblower behind it and hope spring comes early to Wisconsin.

lennyk1313 · 02-10-2018, 03:34 PM

Installed the Genuine GM Suede Console Lid with Performance Logo.

Name: 20180210_200211820_iOS.jpg
Views: 734
Size: 377.6 KB

Here is a quick install video:

https://youtu.be/KJLbQp5ZM4E

mstgeer · 02-10-2018, 05:54 PM

Bought it. Got a 17 Fifty Anniversary convertible SS with auto, mrc and dme. Was a demo with just over 5k miles. When they say summer only tires, they mean it. Had a heck of a time getting up my 1 % grade concrete driveway due to a little slush.

1hprush · 02-11-2018, 09:31 AM

Quote:

Originally Posted by mstgeer

Bought it. Got a 17 Fifty Anniversary convertible SS with auto, mrc and dme. Was a demo with just over 5k miles. When they say summer only tires, they mean it. Had a heck of a time getting up my 1 % grade concrete driveway due to a little slush.

Congrats! The special anniversary edition is hard to find, you're lucky you found one

Cgocifer · 02-11-2018, 04:20 PM

Quote:

Originally Posted by mstgeer

Bought it. Got a 17 Fifty Anniversary convertible SS with auto, mrc and dme. Was a demo with just over 5k miles. When they say summer only tires, they mean it. Had a heck of a time getting up my 1 % grade concrete driveway due to a little slush.

Pics or it didn't happen.

02-04-2018, 06:56 AM	#4580
Soleil Drives: Camaro 50th anniversary edition Join Date: May 2017 Location: Europe Posts: 2,203 View My Garage	I removed my steering wheel and sent it to upholster. I will have a 12h Mark more defined thumb area and 5mm thicker. __________________ Soleil _____________________________________________ A car is fast enough, if you fear to unlock it in the morning." (Walter Roehrl)

02-04-2018, 05:25 PM	#4581
Doug kj6aco Drives: 2017 1LT RS M6 Join Date: Jun 2017 Location: Oceanside, CA Posts: 82	Installed GM Blackout strip between taillights, 2018 model had it on and had to have it. Attached Images

02-08-2018, 04:38 PM	#4587
Tazz3069 Drives: 2016 Camaro 2SS Join Date: Jan 2016 Location: Las Vegas, Nevada Posts: 338 View My Garage	New Scorpion hood is almost done. They just need to polish now. Attached Images __________________ 2016 Camaro 2SS "Black Widow"

02-10-2018, 03:34 PM	#4589
lennyk1313 2018 SS 1LE Red Hot Drives: 2018 SS 1LE Join Date: Dec 2017 Location: NJ Posts: 96	Installed the Genuine GM Suede Console Lid with Performance Logo. Here is a quick install video: https://youtu.be/KJLbQp5ZM4E __________________ 2018 SS 1LE Red Hot https://www.youtube.com/lennyk

02-05-2018, 11:49 AM	#4583
treborcj Drives: 2017 Chevy Camaro 2SS Join Date: Jan 2018 Location: Austin, TX Posts: 21	Added a tinted license plate cover

02-05-2018, 06:37 PM	#4585
chiefmg Drives: 2016 2SS vert (wife's) Join Date: Jan 2018 Location: N KY Posts: 448	Got her registered/licensed today. Bought a slim black frame for it and then had to go to three different places looking for some nylon screws. Some time since my last purchase of these, they stopped making the nuts with flanges. This means they don't cover the holes on either the plate of the frame. Finally found some that will work at O'Reilly's. What I do is install them at the bottom of the frame in reverse so the head is next to the body. I put some silicone on the heads so the body is protected, this also keeps it from rattling. I'll have to see what GM used for inserts for the attachment screws, I may have to cut a piece of rubber I have to put at the top of the plate so it doesn't abrade the paint.

02-09-2018, 08:50 PM	#4588
Badger 4 Drives: 2017 Camaro 2SS, Hyper Blue Join Date: Jan 2018 Location: Wisconsin Posts: 4	Looked at it while I started our snowblower to clear our driveway. Looked at it again while I parked the snowblower behind it and hope spring comes early to Wisconsin.

02-10-2018, 05:54 PM	#4590
mstgeer Drives: '17 2SS Vert H50, A8, F55, NPP Join Date: Jan 2018 Location: NW PA Posts: 179	Bought it. Got a 17 Fifty Anniversary convertible SS with auto, mrc and dme. Was a demo with just over 5k miles. When they say summer only tires, they mean it. Had a heck of a time getting up my 1 % grade concrete driveway due to a little slush.

User Name		Remember Me?
Password