Camber/Caster plates for your 1LE!! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Moreno1 · 10-23-2014, 07:40 PM

CLICK HERE FOR SALE THREAD!

Get up to an extra 1.5 degrees in camber or caster, or up to 1 degree of camber AND caster!

Works with strut tower bar. ONE DESIGN that will work with both aftermarket 2.5" springs and OEM style springs, so you won't need to change anything if you ever decide to upgrade your struts to coil over!

DRILL FREE design uses the shock tower hole to keep the plate concentric at all times, so adjustments are easier and more precise!

Pricing, timeline, and more details in the sale thread.

Thanks

Justin Moreno

Moreno1 · 01-30-2015, 10:49 AM

Hey guys FYI, the machinist wasn't done with the original batch of 60 sets before they were all sold out. So while he was at it, it was convenient to have him do 20 more sets. They are done, it just that we only had purchased bearing for the 30. We have since gotten the bearing in and will be putting them together on Friday. Four sets are spoken for and only 6 sets are left. Once those 6 sets are gone, I'm thinking it will be a while before we will run another batch. To make it feasible, we need to machine 50 at a time, so who knows how long it will take to drum up enough interest to justify it.

Point is, if you want a set; don’t miss out on these last remaining 6!

Moreno1 · 11-17-2015, 06:59 PM

Hey guys, FYI guys, it’s been a while since we did a run of camber plates. We have had a hand full of guy ask if we can make more. We are doing a batch of ten. They should be available in the next couple of weeks. Machine works is done, dropping them off at the anodizer and then the ether and they should be ready to go. Send us a PM if you’re interested in a set so we can reserve one for you.

BTW, kinda cool Multimatic is using a set of our camber/caster plate on a special project.

Moreno1 · 02-10-2016, 12:22 PM

We had more guys wanting these then we made. We weren't planning on making anymore anytime soon as it doesn't make financial sense to do less then 15 at a time.

We feel bad for the guys that were left out, so we are going to make a smaller batch of 10 just to help them out. We have 4 unspoken for. If you want to reserve a set before they are sold out, send us a PM with your Paypal info and we will send you an invoice to get it locked in. They should be ready in 3 to 4 weeks.

Moreno1 · 03-12-2016, 03:30 PM

OK guys, these will ship out on Monday. We do have a couple of sets left unspoken for. Don't delay if your planning on tracking your car, its a must have. These are the same set Multimatic is running on their test car.

These are our "SPECIAL EDITION" version. Each of the fours machined parts have been vapor blasted and Nickel plated. We re[laced the button head bolts with the more appealing socket heads. The etching was done in black instead of white. This is a multi process is more and expenses then just doing the white. Plus its take 5 times as long as the etcher goes at 15% the speed as in doing the white. The good news is we have keep the price the same.

Name: IMG_3172.jpg
Views: 723
Size: 188.1 KB

Name: IMG_3172.jpg
Views: 723
Size: 188.1 KB

Moreno1 · 03-15-2016, 11:15 PM

Thanks for the orders guys. Only one set remaining!

Pushrod Pete · 08-02-2016, 09:57 PM

Sets still unspoken for?

Olddudesrule · 08-03-2016, 09:35 AM

Got a set left??

Moreno1 · 08-04-2016, 06:23 PM

Quote:

Originally Posted by Pushrod Pete

Sets still unspoken for?

Pete, you lucked out, LOL.

Quote:

Originally Posted by Olddudesrule

Got a set left??

Sorry but they are all gone. If we get enough interest, we will make another run. Please PM us if you want to have us put you on the list. It will probably be weeks weeks to get them done once we run the batch.

Pushrod Pete · 08-04-2016, 07:01 PM

I can't wait to receive them.

summit1le · 08-05-2016, 12:52 PM

Damn I sold mine and now I bought my car back from the junkyard and am rebuilding!! I wish I didn't sell!!

MediumLabowski · 08-05-2016, 01:09 PM

Quote:

Originally Posted by summit1le

Damn I sold mine and now I bought my car back from the junkyard and am rebuilding!! I wish I didn't sell!!

They went to a good home. 👍

HUSTLESTUFF · 10-05-2016, 01:39 AM

PM Sent

Moreno1 · 10-07-2016, 10:43 PM

Putting them together and will be shipping out first of next week.

Couple still left unspoken for.

Here is the link with all the details: http://www.camaro5.com/forums/showthread.php?t=381597

Name: IMG_1888.jpg
Views: 336
Size: 324.8 KB

Name: IMG_1888.jpg
Views: 336
Size: 324.8 KB

10-23-2014, 07:40 PM	#1
Moreno1 Drives: G5.R Join Date: Sep 2010 Location: SoCal Posts: 2,377	Camber/Caster plates for your 1LE!! CLICK HERE FOR SALE THREAD! Get up to an extra 1.5 degrees in camber or caster, or up to 1 degree of camber AND caster! Works with strut tower bar. ONE DESIGN that will work with both aftermarket 2.5" springs and OEM style springs, so you won't need to change anything if you ever decide to upgrade your struts to coil over! DRILL FREE design uses the shock tower hole to keep the plate concentric at all times, so adjustments are easier and more precise! Pricing, timeline, and more details in the sale thread. Thanks Justin Moreno Last edited by Moreno1; 10-01-2016 at 03:09 PM.

03-12-2016, 03:30 PM	#5
Moreno1 Drives: G5.R Join Date: Sep 2010 Location: SoCal Posts: 2,377	Moreno Motorsports "SPECIAL EDITION" camber plates OK guys, these will ship out on Monday. We do have a couple of sets left unspoken for. Don't delay if your planning on tracking your car, its a must have. These are the same set Multimatic is running on their test car. These are our "SPECIAL EDITION" version. Each of the fours machined parts have been vapor blasted and Nickel plated. We re[laced the button head bolts with the more appealing socket heads. The etching was done in black instead of white. This is a multi process is more and expenses then just doing the white. Plus its take 5 times as long as the etcher goes at 15% the speed as in doing the white. The good news is we have keep the price the same.

08-03-2016, 09:35 AM	#8
Olddudesrule Resident nomad Drives: 2014 Summit White 1SS/1LE Join Date: Nov 2015 Location: Gilbert, AZ Posts: 1,765	Got a set left?? __________________ Sold: 2007 Z06 2002 Viper GTS/ACR 2003 Z06 1965 FFR Cobra 2012 Nissan 370Z ADM LSA Stage II, Roto-Fab CAI, Kooks LTH/HFC's, Phastek CC, ported TB, Mishimoto radiator and oil cooler, BC Racing ER Series CO's, JPSS 32mm Black Magic rear bar, JPSS front inserts, R1 Concepts Premier slotted rotors/Goodrich SS lines, Schroth ASM harness, MGW flatstick, Brey-Krause HB, Tuned by NicD, at Cordes Performance Racing.

08-05-2016, 12:52 PM	#11
summit1le Drives: 15 Lexus RCF, 17 Vette Grand Sport Join Date: Apr 2013 Location: South Florida Posts: 549	Damn I sold mine and now I bought my car back from the junkyard and am rebuilding!! I wish I didn't sell!! __________________ 2013 Summit 1SS 1LE w/NPP, SW 1 7/8" Long Tube Headers, CAI Intake, Ported TB, Cammotion 224/232 113 LSA, BTR Valvetrain, Melling Oil Pump, 468 HP 423, Apex Catch Can, Tank Plates, RPM 4 Point Roll Bar with SCCA/NASA Cross Brace, Schroth 6 Point Han's Harness, OMP WRC Front Seats, F.M.T Trailing Arms, F.M.T Solid Aluminum Subframe Bushings, Moreno Motorsports Camber Plates, BMR Bushings Front and Rear, Essex/AP Racing Radi-Cal Endurance Front Brakes, Quantum Brake Cooling Ducts, ZL1 Rockers, ZL1 Air Deflectors, Heritage Grill, Pfadt Springs.

10-07-2016, 10:43 PM	#14
Moreno1 Drives: G5.R Join Date: Sep 2010 Location: SoCal Posts: 2,377	Putting them together and will be shipping out first of next week. Couple still left unspoken for. Here is the link with all the details: http://www.camaro5.com/forums/showthread.php?t=381597 Last edited by Moreno1; 10-07-2016 at 11:17 PM.

01-30-2015, 10:49 AM	#2
Moreno1 Drives: G5.R Join Date: Sep 2010 Location: SoCal Posts: 2,377	Hey guys FYI, the machinist wasn't done with the original batch of 60 sets before they were all sold out. So while he was at it, it was convenient to have him do 20 more sets. They are done, it just that we only had purchased bearing for the 30. We have since gotten the bearing in and will be putting them together on Friday. Four sets are spoken for and only 6 sets are left. Once those 6 sets are gone, I'm thinking it will be a while before we will run another batch. To make it feasible, we need to machine 50 at a time, so who knows how long it will take to drum up enough interest to justify it. Point is, if you want a set; don’t miss out on these last remaining 6!

11-17-2015, 06:59 PM	#3
Moreno1 Drives: G5.R Join Date: Sep 2010 Location: SoCal Posts: 2,377	Hey guys, FYI guys, it’s been a while since we did a run of camber plates. We have had a hand full of guy ask if we can make more. We are doing a batch of ten. They should be available in the next couple of weeks. Machine works is done, dropping them off at the anodizer and then the ether and they should be ready to go. Send us a PM if you’re interested in a set so we can reserve one for you. BTW, kinda cool Multimatic is using a set of our camber/caster plate on a special project.

02-10-2016, 12:22 PM	#4
Moreno1 Drives: G5.R Join Date: Sep 2010 Location: SoCal Posts: 2,377	We had more guys wanting these then we made. We weren't planning on making anymore anytime soon as it doesn't make financial sense to do less then 15 at a time. We feel bad for the guys that were left out, so we are going to make a smaller batch of 10 just to help them out. We have 4 unspoken for. If you want to reserve a set before they are sold out, send us a PM with your Paypal info and we will send you an invoice to get it locked in. They should be ready in 3 to 4 weeks.

03-15-2016, 11:15 PM	#6
Moreno1 Drives: G5.R Join Date: Sep 2010 Location: SoCal Posts: 2,377	Thanks for the orders guys. Only one set remaining!

08-02-2016, 09:57 PM	#7
Pushrod Pete Drives: Camaro 1LE Join Date: Mar 2015 Location: Nor Cal Posts: 489	Sets still unspoken for?

08-04-2016, 07:01 PM	#10
Pushrod Pete Drives: Camaro 1LE Join Date: Mar 2015 Location: Nor Cal Posts: 489	I can't wait to receive them.

10-05-2016, 01:39 AM	#13
HUSTLESTUFF Drives: Mopars Join Date: Mar 2014 Location: Norcal Posts: 23	PM Sent