Boost gauge shows up after supercharger install...

chrest · 01-09-2018, 05:41 PM

I just finished the install on my vortech supercharger set up. I disconnected the maf like I read on here for the initial start up. And this popped up on my dash.

How did I get that boost gauge and how can I get it to stay? It went away as soon as I got the car running.
I imagine the 3 Bar map is what triggers it correct? Has anyone been able to access it permanently?

travislambert · 01-09-2018, 05:58 PM

Wow! That's really cool. I hope somebody is able to figure out how to get it to stay.

I'm sure all of the folks with aftermarket superchargers and turbos would love to have that gauge.

MR 45TH · 01-09-2018, 08:11 PM

Never heard of that

MP3BOOSTED · 01-09-2018, 08:18 PM

That is the coolest thing I’ve ever seen!! I want

SilverSS1LE · 01-09-2018, 08:23 PM

I want! thats the best boost gauge!

Joe's_cool_1le · 01-09-2018, 08:45 PM

Nice!!!

Gunkk · 01-09-2018, 08:57 PM

chrest found and egg and it’s not even Easter yet. Cool!

oneredry · 01-09-2018, 09:38 PM

......Prior to my P3 gauge, I have been asking this very question as to "HOW"???? if I can get mine to appear, I'd gladly sell my P3 at a good deal!

chrest · 01-09-2018, 09:40 PM

I was in process of installing a boost gauge and the aeroforce mount lol. And remember this being talked about with no luck. But didn’t think I was the only one to see this!

TheRedhead · 01-10-2018, 12:45 PM

Definitely for a turbo. Probably a dash setting for the 2.0.

JeromeS13 · 01-10-2018, 12:49 PM

Quote:

Originally Posted by TheRedhead

Definitely for a turbo. Probably a dash setting for the 2.0.

Your ZL1 1LE should have the same gauge, no?

TheRedhead · 01-10-2018, 12:49 PM

I'd love to see a blower that hits 30 pounds.

But no, it's 15-0-15.

chrest · 01-10-2018, 01:20 PM

so what triggered it? the car is untuned. nothing done but the install of the vortech. The 3 bar Map IS installed. I literally only started it to check for leaks or issues and what not prior to towing to my tuner. That gauge showed up only PRIOR to the car starting, then it switched back to the battery as soon as the car fired.

TheRedhead · 01-10-2018, 01:32 PM

Quote:

Originally Posted by chrest

so what triggered it? the car is untuned. nothing done but the install of the vortech. The 3 bar Map IS installed. I literally only started it to check for leaks or issues and what not prior to towing to my tuner. That gauge showed up only PRIOR to the car starting, then it switched back to the battery as soon as the car fired.

Only thing I could think of is if it picked up a vacuum/boost line somewhere, or the MAP. Wide/Narrow could also trigger it.

01-09-2018, 05:41 PM	#1
chrest Drives: 2017 Camaro 2SS Join Date: Mar 2017 Location: Portland/Vancouver Posts: 410	Boost gauge shows up after supercharger install... I just finished the install on my vortech supercharger set up. I disconnected the maf like I read on here for the initial start up. And this popped up on my dash. How did I get that boost gauge and how can I get it to stay? It went away as soon as I got the car running. I imagine the 3 Bar map is what triggers it correct? Has anyone been able to access it permanently? Attached Images __________________ 2017 NGM 2SS NPP M6 MRC Vortech SC, 2" TSP LT No Cats, Borla X, Eibach, Hurst shifter 603hp/547tq

01-09-2018, 05:58 PM	#2
travislambert Drives: '17 ZL1 Join Date: Jul 2016 Location: Fairmont, WV Posts: 1,558	Wow! That's really cool. I hope somebody is able to figure out how to get it to stay. I'm sure all of the folks with aftermarket superchargers and turbos would love to have that gauge. __________________ 2023 Camaro SS 1LE A10 2023 Camaro ZL1 1LE M6 2017 Camaro ZL1 M6 2016 Camaro SS M6 w/LT4 (Sold)

01-09-2018, 08:11 PM	#3
MR 45TH Drives: 2018 ZL1 Join Date: Oct 2011 Location: Huntingtown, MD Posts: 1,138	Never heard of that __________________ 2018 ZL1…Many mods to come

01-09-2018, 08:18 PM	#4
MP3BOOSTED Drives: 2017 Camaro SS 1LE (F1A-94 FBO H/C) Join Date: Jun 2017 Location: San Antonio Texas Posts: 843	That is the coolest thing I’ve ever seen!! I want __________________ Performance Mods: F1A-94, DSX Flex Fuel Kit, MSD Spark Plug Wires, KOOK 2" off road headers, MBRP Race catback exhaust, Pray Performance Custom Boost Cam, Rocker Arm Trunion Upgrade Kit, 7.850" Hardened Chromemoly Length Pushrods and Johnson Racing 2110R Lifters, TSP CNC'd Heads, Ported MSD intake manifold, 103mm Katech Throttle body, Forged Pistons/Rods, RPM Meth kit, DSX Aux Fuel system, AEM Failsafe and banks gauge, LT4 HPFP, LT4 injectors, BMR motor mounts, Hurst Short Throw, Manley SS exhaust valves Videos of my car? Check here: https://www.youtube.com/channel/UCNi...Qy1OL4NVGlPogw

01-09-2018, 08:23 PM	#5
SilverSS1LE Drives: 2017 Summit White 2SS A8 Join Date: Oct 2013 Location: Houston Posts: 312	I want! thats the best boost gauge! __________________ 2017 Summit White 2SS A8 Mod List: Stock (for now)

01-09-2018, 08:45 PM	#6
Joe's_cool_1le Drives: Black 2017 Camaro SS 1LE Join Date: Dec 2016 Location: Virginia Beach Posts: 1,319	Nice!!! __________________ 2017 1LE SS Black - Mods - Forged - lowered compression - BTR custom Cam - Whipple, 3.500 upper and 8.0 lower pulley, Roto-Fab, 1 7/8 Kooks headers, off road pipes, & 3" Kooks full exhaust. LT4 fuel system, with Alky single nozzle running 100% meth. (not installed yet) DSX Tuning flex fuel and DSX tuning Aux pump

01-09-2018, 08:57 PM	#7
Gunkk Thank you Al Oppenheiser! Drives: Red Hot A10 ZL1 Convertible Join Date: Jun 2017 Location: Sarasota, FL Posts: 4,973 View My Garage	chrest found and egg and it’s not even Easter yet. Cool!

01-09-2018, 09:38 PM	#8
oneredry HYPER SS Drives: 2016 Supercharged 2SS Join Date: Feb 2014 Location: Troy OH Posts: 1,252	......Prior to my P3 gauge, I have been asking this very question as to "HOW"???? if I can get mine to appear, I'd gladly sell my P3 at a good deal! __________________ Ordered: 1/15/2016 2000 status 02/01/16 3000 status 02/29/16 3400 status 03/07/16 TPW of 03/14/16 4200 status 03/17/16 in transit! Delivered 03/23/16 2SS Hyper Blue \| 6M \| NPP \| Mag ride \| ceramic white Int. \| Black out bow ties \| P3 Gauge\| Front splitter. \| 6 pot upgraded brembo brakes. \| Magnuson Supercharger/95MM pulley \| Rotofab Intake \| ZL1 side skirts \| HRE FF04 wheels - Michelin PSS4 \| ZL1 add ons rock guards and lift points. \| AWE touring - resinated catback with link pipes.

01-09-2018, 09:40 PM	#9
chrest Drives: 2017 Camaro 2SS Join Date: Mar 2017 Location: Portland/Vancouver Posts: 410	I was in process of installing a boost gauge and the aeroforce mount lol. And remember this being talked about with no luck. But didn’t think I was the only one to see this! __________________ 2017 NGM 2SS NPP M6 MRC Vortech SC, 2" TSP LT No Cats, Borla X, Eibach, Hurst shifter 603hp/547tq

01-10-2018, 12:45 PM	#10
TheRedhead Drives: 2018 Red Hot ZL1 1LE Join Date: May 2017 Location: Tampa, FL Posts: 562	Definitely for a turbo. Probably a dash setting for the 2.0. __________________ 2018 RED HOT ZL1-1LE: Nav,PDR,Floor Mats Built!

01-10-2018, 12:49 PM	#12
TheRedhead Drives: 2018 Red Hot ZL1 1LE Join Date: May 2017 Location: Tampa, FL Posts: 562	I'd love to see a blower that hits 30 pounds. But no, it's 15-0-15. __________________ 2018 RED HOT ZL1-1LE: Nav,PDR,Floor Mats Built!

01-10-2018, 01:20 PM	#13
chrest Drives: 2017 Camaro 2SS Join Date: Mar 2017 Location: Portland/Vancouver Posts: 410	so what triggered it? the car is untuned. nothing done but the install of the vortech. The 3 bar Map IS installed. I literally only started it to check for leaks or issues and what not prior to towing to my tuner. That gauge showed up only PRIOR to the car starting, then it switched back to the battery as soon as the car fired. __________________ 2017 NGM 2SS NPP M6 MRC Vortech SC, 2" TSP LT No Cats, Borla X, Eibach, Hurst shifter 603hp/547tq

User Name		Remember Me?
Password