12-08-2012, 04:48 PM | #99 |
BL1ZZRD
Drives: '16 Camaro 2SS, '20 Equinox Redline Join Date: Jul 2009
Location: Buffalo, NY
Posts: 7,840
|
You started this thread in May and you're STILL asking for advice? What has Forgestar said? What has someone at Adams said? Here's some advice, try SOMETHING and then let us know if it worked!
|
12-09-2012, 01:56 PM | #100 | |
Not going to say what vendor on here did it, but they quoted me $3800.
I dont think tires are 2k Quote:
|
||
12-09-2012, 11:36 PM | #101 | |
Drives: Black 2011 2LT RS Join Date: Jan 2011
Location: Southern California
Posts: 629
|
Quote:
I tried Mothers Back-To-Black and it's holding up! Cannot afford to get them PC'd again atm. Definitely cannot afford a new set of rims either. Just looking for a solution.
__________________
Black 2011 2LT RS.
Matte Black ForgeStar F14, Fronts 20x8.5 - Rears 20x10.5 20% All-Around Tint. Black Painted Heritage Grill, Emblem-less. Black Rear Bowtie. AAC P13 DRL's. AAC License Plate LED's. AAC Dome Light/Trunk Light. AAC Tinted Sidemarkers. AAC SMD Afterburners. MRT V1 Exhaust. PFADT 1.25" Lowering Springs. |
|
12-10-2012, 07:29 AM | #102 |
BL1ZZRD
Drives: '16 Camaro 2SS, '20 Equinox Redline Join Date: Jul 2009
Location: Buffalo, NY
Posts: 7,840
|
Sorry to hear about the accident! Sorry for being so hard on you with that post! Do you have any pics of how they turned out with the Back to Black?
|
12-14-2012, 07:49 PM | #103 | |
Drives: 2011 White Join Date: Aug 2011
Location: Alexander City, Alabama
Posts: 78
|
Quote:
plastidip the wheels alot of vids on Youtube about it. |
|
02-20-2013, 09:13 AM | #104 |
Drives: 2010 camaro ss LS3 cyber grey Join Date: Aug 2010
Location: Madison,wi
Posts: 226
|
So reading through this post I have to agree 100% with most of the people who replied. I also purchased a set of forgestar matte black wheels, and got the same response from Forgestar that it basically isn't their problem. When I recieved the wheels, there wasn't any warning lables, or wheel care or any paperwork for that matter in the set of wheels.
First off why wouldn't I take my car through the car wash if I wasn't told that it would ruin Matte black finish? That is just normally what people will do unless told otherwise. For $1800 bucks they look like shit. I would not purchase anything from Forgestar again, mostly because of their customer service. I get the arguement that some people will say you have to know these things, but when you don't have any expeirence with Matte how are you supose to know. So a friend of mine bought a Harley that has a Matte black finish, and they went over with him in detail about how he needs to care for his paint. I can 'bandage' the wheels up with cleaners and such, but they will never have that matte look. So I am a very dissatisfied customer. |
02-20-2013, 03:39 PM | #105 | |
Drives: Black 2011 2LT RS Join Date: Jan 2011
Location: Southern California
Posts: 629
|
Quote:
And for something as normal as a car wash to damage expensive wheels is just not right to me. It should never be a thing "you were supposed to know." In my case, these were the first matte black wheels I've ever purchsed (the first matte black product, period.) Screw Forgestar.
__________________
Black 2011 2LT RS.
Matte Black ForgeStar F14, Fronts 20x8.5 - Rears 20x10.5 20% All-Around Tint. Black Painted Heritage Grill, Emblem-less. Black Rear Bowtie. AAC P13 DRL's. AAC License Plate LED's. AAC Dome Light/Trunk Light. AAC Tinted Sidemarkers. AAC SMD Afterburners. MRT V1 Exhaust. PFADT 1.25" Lowering Springs. |
|
02-20-2013, 04:08 PM | #106 |
Drives: 2010 camaro ss LS3 cyber grey Join Date: Aug 2010
Location: Madison,wi
Posts: 226
|
Yep, I agree. I will never buy another set, nor recommend them to anyone I know.
|
02-20-2013, 05:31 PM | #107 |
Drives: 2010 Camaro 2SS/RS Join Date: Mar 2008
Location: S.W. Florida
Posts: 6,294
|
My Forgestar wheels that I purchased last summer did come with a wheel care guide (that said to avoid harsh chemicals, car washes, etc).
My F14s are gunmetal and they seem to be holding up well to our local touchless car wash and my occasional cleaning. I've had some medical issues (broken ankle and torn tendon) so I've been using the automatic car wash near my house. My car has been through the touchless automatic car wash at least 20+ times and my wheels still look good. So I guess its their matt black finish that doesn't hold up very well. I guess I'll need to be very careful not to buy any matt black wheels. I wonder how well Forgestar's textured black finish hold up to washes, etc? |
02-20-2013, 09:41 PM | #108 | |
Drives: Black 2011 2LT RS Join Date: Jan 2011
Location: Southern California
Posts: 629
|
Quote:
Or I might just plasti-dip these for now because I can't afford to get them re-powdercoated again. But nonetheless, I'm really disappointed in the way Forgestar handled our situations.
__________________
Black 2011 2LT RS.
Matte Black ForgeStar F14, Fronts 20x8.5 - Rears 20x10.5 20% All-Around Tint. Black Painted Heritage Grill, Emblem-less. Black Rear Bowtie. AAC P13 DRL's. AAC License Plate LED's. AAC Dome Light/Trunk Light. AAC Tinted Sidemarkers. AAC SMD Afterburners. MRT V1 Exhaust. PFADT 1.25" Lowering Springs. |
|
02-21-2013, 07:25 AM | #109 |
Thankfully I found this thread. My matte black f14s are being delivered today. I never take my car to a car wash and obviously wont in the future.
__________________
2011 SS. K&N intake, Kooks stepped long tube headers with cat-less midpipes, Corsa exhaust, and tuned....
|
|
02-21-2013, 02:34 PM | #110 |
Drives: SS, CTS & SRT-4 Join Date: Aug 2009
Location: Pittsburgh
Posts: 427
|
I'm kinda curious why someone would be willing to spend the money on performance parts, but not be willing to find out what care was necessary to maintain them?
Would you also blame GM because they didn't tell you that you should't rub steel wool on your paint? I'm guessing that you'd be the same kind of person that wouldn't change your oil unless the car told you to ( thankfully for you, it does... ). If you snapped a bolt off in a head because you over-tightened it, would you blame the bolt because it didn't tell you what it should be torqued to? How about we just man up, assume some responsibility for our own actions ( or lack of knowledge ), and stop attacking a reputable manufacture for our own mistakes. Forgestar, if you're listening, as a responsible automotive enthusiasts ( who also makes mistakes), I thank you for developing and providing our community with a quality product, that when properly maintained will look and perform just as well as the day you made them! ...and don't worry about including a mattress-tag on your wheels. The majority of us don't need it.
__________________
|
02-21-2013, 04:30 PM | #111 | |
Drives: Black 2011 2LT RS Join Date: Jan 2011
Location: Southern California
Posts: 629
|
Quote:
Rubbing steel wool on paint is so irrelevant to this whole conversation. "Would you run your car into a light post if no one stopped you?" Come on, man. Changing the oil is also another irrelevant example; it's essential to the maintenance of the car. Simply taking a car to something as normal as a car wash is a different thing altogether. THERE'S A CAR WASH ON EVERY CORNER WHERE I'M FROM. And I'm from Los Angeles. Performance cars with performance wheels EVERYWHERE. You're telling me none of these owners take their cars to the CAR WASH? People pay hard earned money to buy these parts for their car. For something as simple and for something as typical as a car wash to ruin your wheels? NOT acceptable. So yes, we'd like a "mattress-tag" if that's what's going to let us know what we can and can not do wit these wheels.
__________________
Black 2011 2LT RS.
Matte Black ForgeStar F14, Fronts 20x8.5 - Rears 20x10.5 20% All-Around Tint. Black Painted Heritage Grill, Emblem-less. Black Rear Bowtie. AAC P13 DRL's. AAC License Plate LED's. AAC Dome Light/Trunk Light. AAC Tinted Sidemarkers. AAC SMD Afterburners. MRT V1 Exhaust. PFADT 1.25" Lowering Springs. |
|
02-21-2013, 05:18 PM | #112 | |
Drives: 2010 Camaro 2SS/RS Join Date: Mar 2008
Location: S.W. Florida
Posts: 6,294
|
Quote:
Rubbing steel wool on your paint? - That's just ridiculous. But taking your car to a car wash is common place. And as you mentioned. I live in a very upscale neighborhood with mostly doctors as neighbors. They drive anything from Bentlys to Porsche Turbos. You will never catch any of them washing their own cars. |
|
|
|
|
|