You are browsing camaro5 
 |
|
08-02-2012, 03:22 PM
|
#1 |
 
Drives: '12 ZL1 SIM ADM Built Join Date: Mar 2012
Location: Oklahoma
Posts: 213
|
Headers for ZL1
I hate to assume anything but will LS3 headers work on the LSA ??
|
|
|
|
08-02-2012, 04:52 PM
|
#2 |
|
Perma Grinning
Drives: 2012 Tom Henry Racing ZL1 Join Date: Feb 2012
Location: Schaumburg, IL
Posts: 452
|
The bigger issue is do LS3 headers fit with the belly pan and all the other "ZL1" stuff . .
Stainless Works and SLP fit headers for the ZL1 |
|
|
|
|
08-02-2012, 05:45 PM
|
#3 |
          
Drives: '21 ZLE A10 Join Date: May 2012
Location: Mechanicsville, VA
Posts: 6,808
|
I heard american racing 1 7/8 fit fine...East Coast Supercharging says so.
__________________
'21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60'
'17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) |
|
|
|
|
08-02-2012, 06:36 PM
|
#4 |
|
Drives: '12 ZL1 SIM ADM Built Join Date: Mar 2012
Location: Oklahoma
Posts: 213
|
Good info, thanks!
|
|
|
|
|
08-02-2012, 06:38 PM
|
#5 |
 Drives: 2012 zl1 Join Date: Jul 2012
Location: grosse pointe mi
Posts: 24
|
i have stainless works headers on my zl1
|
|
|
|
|
08-02-2012, 06:59 PM
|
#6 | |
Drives: C7 / ZL1 / SS / trucsk Join Date: Nov 2009
Location: G4 CLASSIFIED
Posts: 4,533
|
Quote:
I just got my American Racing Headers for the ZL1 will provide pics of whole installation ARH made in the USA = American Jobs , buy American 
__________________
2014 C7 Stingray 3LT/Z51
2013 Camaro SS 2012 Camaro ZL1 - 850 HP 2015 GMC Denali 3500HD 4x4 2012 GMC Sierra 3500HD 4x4 |
|
|
|
|
|
08-02-2012, 09:31 PM
|
#7 |
|
White 2ss, LT, CAI, Tune
Drives: 2010 L99 Join Date: May 2011
Location: memphis
Posts: 651
|
Get some 1/4 mile times before and after please so everyone can see what high flow cats will do to your trap speed.
|
|
|
|
|
08-03-2012, 07:53 AM
|
#8 | |
|
Drives: 2012 ZL1, 2009 CTS-V Join Date: Jun 2011
Location: Staging Lanes
Posts: 463
|
Here are the American Racing headers on my car.
They are the same header as used on the SS. |
|
|
|
|
|
08-03-2012, 08:57 AM
|
#9 |
|
Happy_Dan
Drives: 2012 IOM Camaro ZL1 #569 Join Date: Dec 2011
Location: New Boston, NH
Posts: 2,239
  |
I have SLP Headers on my car. They are part of the SLP Stage III package for the ZL1.
They are made with 100% stainless steel made in USA and are cut, bent, coated and polished all at their facilities in NJ. So they are made in USA with USA steel. The had to cut some of the cover under the car for fit, but it's neat and clean. I can take pictures if you need them. Also, I have had NUMEROUS comments about how great they sound with the stock exhaust. I am VERY happy with them. |
|
|
|
|
08-03-2012, 09:07 AM
|
#10 |
|
Petro-sexual
|
I believe most anything that fits SS will fit ZL1. It sounds like the belly pan will have to be trimmed around the collectors, but otherwise, it shouldn't be a problem. That's what I noticed from Redline's build anyway...
I welcome any and all pics' you guys are willing to share  I can't do this mod', but it is just nice to know for referrence 
__________________
 '20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
|
|
|
|
08-03-2012, 01:31 PM
|
#11 |
Drives: '10 SS + '04 Z16 Z06 S/C Join Date: Jan 2009
Location: Miramar, FL
Posts: 1,196
 |
We have Kooks ZL1 specific headers in stock
|
|
|
|
|
08-03-2012, 02:09 PM
|
#12 | |
|
Drives: '21 ZLE A10 Join Date: May 2012
Location: Mechanicsville, VA
Posts: 6,808
|
Quote:
__________________
'21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60'
'17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) |
|
|
|
|
|
08-03-2012, 02:30 PM
|
#13 |
 
Drives: 2018 ZL1 1LE (2)79Z28 72RS 67SS 69Z Join Date: May 2009
Location: Arizona
Posts: 422
|
Will the SS LT Kooks fit?
Do theses have to be tuned like on the SS? I have a set from my LS3 SS I want to put on the ZL1 the flanges look ok but not sure about the fitment. help!
__________________
- Buttons and Skulls -
miss my annimated signature. Last edited by itsadryheat79; 08-03-2012 at 02:59 PM. |
|
|
|
|
08-04-2012, 08:55 AM
|
#14 |
|
CaRaHoLiC
Drives: '12 ZL1,67 Cam,68 Biscayne 427 4 sp Join Date: Aug 2011
Location: B.C. Canada
Posts: 1,701
|
I don't see what would be any different about a ZL1 header...everything's the same to do with that part with the SS..
__________________
2012 ZL1
2.55 upper, 10" lower pullies, Innovators west billet hub and sfi balancer, solid blower drive isolator, 50 mm idler kit, full length S/S headers no cats, comp cams custom grind cam, comp roller rocker trunion kit, comp push rods,dual valve springs retainers and locks, Injector dynamics ID850 inectors, Rotofab ZL1 cold air kit, Lingenfelter 160 thermostat, Rotofab intercooler reservoir, stock plugs, LS7 90mm throttle body, GTO clutch reservoir mod, my own custom catch can, Tuning by Jannetty, install by me. |
|
|
|
|
|
|
|
 |
|
|
