Let's Speculate on these official 2016 Camaro teaser images!!

iSHOOTtheMOON · 03-15-2015, 11:29 PM

Taken from http://www.chevrolet.com/2016-camaro/

Name: Screen Shot 2015-03-15 at 9.45.43 PM.jpg
Views: 9494
Size: 186.2 KB

Last one is the infamous "roofline"

LET THE SPECULATION AND FUN BEGIN!!!

SuperSound · 03-15-2015, 11:39 PM

LET THE SPECULATION AND FUN BEGIN!!![/QUOTE]

Looks like two different spoilers for one.

Jbryant910 · 03-15-2015, 11:40 PM

I turned my brightness all the way up on my iPad, I see a throttle body, headers, what could be bre no type breaks, and what sorta looks like a curved dash board

Jbryant910 · 03-15-2015, 11:41 PM

And corvette style rims

Tran · 03-15-2015, 11:49 PM

Added enhanced version

sonnydurden · 03-15-2015, 11:53 PM

Incredible time for Camaro enthusiast. 5/16 feels like Christmas!!!

iSHOOTtheMOON · 03-15-2015, 11:57 PM

<-- What could this be?

Name: 2.jpg
Views: 8700
Size: 46.8 KB

<-- TUBULAR HEADERS ?!

Name: 9.jpg
Views: 8409
Size: 26.8 KB

<-- rear spoiler?

Name: 10.jpg
Views: 8377
Size: 35.8 KB

<-- hood?

<-- infamous "roofline"

DanSS24 · 03-16-2015, 12:05 AM

This is gettin' good. Oh yeah!!!!!

Dayum...I just shot my load!!!

ChefBorOzzy · 03-16-2015, 12:07 AM

Looks like a pretty big "back" side window.

Bhobbs · 03-16-2015, 12:32 AM

Chassis
Power train
Dash board support? So maybe interior
Not sure what this one is. Looks like maybe a brake rotor
Definitely a rotor
Wheels maybe
Exhaust system
Tubular headers. I hope to God those are standard
Spoiler
Hood
Grille maybe
Body

newb · 03-16-2015, 01:31 AM

Transmission tunnel
throttle body
Dash support structure
Brake rotor
Caliper and rotor
Wheel obviously
Factory x-pipe in the exhaust
Factory exhaust manifold/ header
The spoiler we all disliked so much
End plate of the same spoiler
Grill
Roofline

Very interesting. My interest is peaked. I hope the spoiler is nicer that the spy one we have seen.

LesserO2Evils · 03-16-2015, 02:11 AM

Transmission tunnel
Throttle body
Dash support
I dont think its a rotor, but IDK.
Caliper and rotor(Brembo style)
Wheel
Factory x-pipe in the exhaust
Factory exhaust manifold/ header(IMPRESSIVE!)
Spoiler
Edge of hood
Grill
Roofline

newb · 03-16-2015, 03:31 AM

Now that I looked again it does appear to be a corner of the hood.

Ph4r · 03-16-2015, 04:43 AM

Trans Tunnel
Throttle Body
Dash Support
Light-weight, Stiffer Suspension (kinda looks like a pfadt rear trailing arm)
Brake Caliper and Rotor
Wheel with Wheel Bolts (Euro Style)
Definately an exhaust, i see it as two tubes that are covered by a heat shield as they turn, then drop down?
Tubular Headers (kinda small though)
Spoiler
Hood Corner
Hood Air Extractor?
Fastback Roofline

03-15-2015, 11:29 PM	#1
iSHOOTtheMOON Drives: 2013 Triple Black ZL1 Join Date: Dec 2014 Location: Iowa Posts: 66	Let's Speculate on these official 2016 Camaro teaser images!! Taken from http://www.chevrolet.com/2016-camaro/ Last one is the infamous "roofline" LET THE SPECULATION AND FUN BEGIN!!! Last edited by iSHOOTtheMOON; 03-15-2015 at 11:39 PM.

03-15-2015, 11:39 PM	#2
SuperSound Drives: '17 Camaro 2SS A8 Join Date: Jan 2015 Location: Eastern NC Posts: 5,063 View My Garage	LET THE SPECULATION AND FUN BEGIN!!![/QUOTE] Looks like two different spoilers for one. __________________ Current: '17 2SS Hyper Blue, A8, MRC, NPP Past: '99 SS Camaro A4, '73 Camaro 383 A3 "Voices in your head are not considered insider information." 3800 Status - 6/16/16 (Built!) 6000 status - 6/29/16 (Delivered!)

03-15-2015, 11:49 PM	#5
Tran Administrator Drives: 2010 Camaro of course.... Join Date: Apr 2006 Location: NE baby Posts: 5,616 View My Garage	Added enhanced version __________________ FACEBOOK

03-15-2015, 11:57 PM	#7
iSHOOTtheMOON Drives: 2013 Triple Black ZL1 Join Date: Dec 2014 Location: Iowa Posts: 66	I have the auto-fixed versions without the lock symbol! <-- What could this be? <-- TUBULAR HEADERS ?! <-- rear spoiler? <-- hood? <-- infamous "roofline" Last edited by iSHOOTtheMOON; 03-16-2015 at 01:58 AM.

03-16-2015, 12:05 AM	#8
DanSS24 Drives: Dream Cars in my head Join Date: Apr 2008 Location: 808 Posts: 1,290	This is gettin' good. Oh yeah!!!!! Dayum...I just shot my load!!! __________________ Wishful thinking...but I sure can dream big.

03-15-2015, 11:40 PM	#3
Jbryant910 Drives: 2014 Malibu Join Date: Feb 2015 Location: Jacksonville, FL Posts: 41	I turned my brightness all the way up on my iPad, I see a throttle body, headers, what could be bre no type breaks, and what sorta looks like a curved dash board

03-15-2015, 11:41 PM	#4
Jbryant910 Drives: 2014 Malibu Join Date: Feb 2015 Location: Jacksonville, FL Posts: 41	And corvette style rims

03-15-2015, 11:53 PM	#6
sonnydurden Drives: ‘16 1SS & ‘19 1LT Join Date: Aug 2012 Location: Windermere, FL Posts: 2,086	Incredible time for Camaro enthusiast. 5/16 feels like Christmas!!!

03-16-2015, 12:07 AM	#9
ChefBorOzzy Drives: 2016 F150 Join Date: May 2014 Location: Iowa Posts: 2,196	Looks like a pretty big "back" side window.

03-16-2015, 12:32 AM	#10
Bhobbs Drives: 2015 SS 1LE Red Hot, 1970 Chevelle Join Date: Apr 2012 Location: Chino, CA Posts: 6,989	Chassis Power train Dash board support? So maybe interior Not sure what this one is. Looks like maybe a brake rotor Definitely a rotor Wheels maybe Exhaust system Tubular headers. I hope to God those are standard Spoiler Hood Grille maybe Body __________________ Last edited by Bhobbs; 03-16-2015 at 01:34 AM.

03-16-2015, 01:31 AM	#11
newb Drives: 2013 1LE Join Date: Feb 2012 Location: DMV Posts: 1,548	Transmission tunnel throttle body Dash support structure Brake rotor Caliper and rotor Wheel obviously Factory x-pipe in the exhaust Factory exhaust manifold/ header The spoiler we all disliked so much End plate of the same spoiler Grill Roofline Very interesting. My interest is peaked. I hope the spoiler is nicer that the spy one we have seen. __________________ It's a Dingledarm. It's there to dampen side fumbling. If your marzelvanes fumble too much they can cause total protonic reversal. It gets ugly from there. This is really the biggest problem with the new Camaro. That and the tri-pronged blivot. Delivered 21 Jan 2013

03-16-2015, 02:11 AM	#12
LesserO2Evils GM repeat offender... Drives: 16 2SS Join Date: Dec 2014 Location: Grandview, Texas Posts: 1,474	Transmission tunnel Throttle body Dash support I dont think its a rotor, but IDK. Caliper and rotor(Brembo style) Wheel Factory x-pipe in the exhaust Factory exhaust manifold/ header(IMPRESSIVE!) Spoiler Edge of hood Grill Roofline __________________ '16 2SS, Summit White. A8. MRC. NPP. Ordered:09/03/15. Received 12/22/15 INCOMING: ‘22 ZL1, Satin Steel. A10. PDR. Ordered: 03/02/22.

03-16-2015, 03:31 AM	#13
newb Drives: 2013 1LE Join Date: Feb 2012 Location: DMV Posts: 1,548	Now that I looked again it does appear to be a corner of the hood. __________________ It's a Dingledarm. It's there to dampen side fumbling. If your marzelvanes fumble too much they can cause total protonic reversal. It gets ugly from there. This is really the biggest problem with the new Camaro. That and the tri-pronged blivot. Delivered 21 Jan 2013

03-16-2015, 04:43 AM	#14
Ph4r Top Down Fun Drives: 11 2SS/RS IOM Vert Join Date: Jun 2009 Location: Washington Twp, MI Posts: 457 View My Garage	Trans Tunnel Throttle Body Dash Support Light-weight, Stiffer Suspension (kinda looks like a pfadt rear trailing arm) Brake Caliper and Rotor Wheel with Wheel Bolts (Euro Style) Definately an exhaust, i see it as two tubes that are covered by a heat shield as they turn, then drop down? Tubular Headers (kinda small though) Spoiler Hood Corner Hood Air Extractor? Fastback Roofline __________________ 2011 Chevrolet Camaro Convertible 2SS RS M6 IOM Vert! IO Interior, Factory Hurst, Painted GFX, Black Rally Stripes, Front/Rear/Bowtie Blackouts, QTP Cutouts, Extra Cupholders! LED Tails, LED DRL's (always on!), Ghosted "Concept" LED Side Markers, LED Tag Lights, Tinted LED Reverse Lights, Chrome Front Turn Signal Bulbs! My Build Thread Daily Driver: 2016 Ford Fusion Titanium with 2 car seats in the back!

User Name		Remember Me?
Password