'13 ZL1 #1440 Let the build commence - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

tones2SS · 12-06-2013, 07:56 PM

Quote:

Originally Posted by toyosuprablue

This is from when I swapped out the the Heat Exchanger... I thought I posted these but I guess not

Nice car. Great numbers indeed.

Do those hp and tq numbers include the intercooler and tune for the intercooler as well?

toyosuprablue · 01-04-2014, 03:34 PM

Quote:

Originally Posted by tones2SS

Nice car. Great numbers indeed.

Do those hp and tq numbers include the intercooler and tune for the intercooler as well?

No, those numbers were before the intercooler and I didn't get it re-tuned afterwards.

toyosuprablue · 04-08-2014, 01:46 PM

Been doing a lot of reading on C5 and have finally decided to go to the next step. I have an appointment on Monday for a lower pulley and cam swap at JRE. Will post pics and dyno sheet sometime next weekend after I get her back

toyosuprablue · 04-18-2014, 06:36 PM

Just got home with my car from JRE. She went 652 rwhp 613 rwtq! Streetability is amazing. I couldn't be happier with the cam and lower pulley combo we put together. Special thanks goes out to the entire Jannetty Racing Enterprises team!

toyosuprablue · 04-20-2014, 03:19 PM

Some pics from the cam and pulley install:

BumblebeeQ8 · 04-20-2014, 03:37 PM

Car looks and sounds mean !!

toyosuprablue · 04-21-2014, 07:38 AM

Quote:

Originally Posted by BumblebeeQ8

Car looks and sounds mean !!

Thanks! I'll have to make a video of the car idling now with the cam. It rumbles! I've gotten several head turns just the first weekend haha

toyosuprablue · 07-15-2015, 07:26 AM

Update: Just clicked 22,000 miles.

Starting to prep for CamaroFest:

New Michelin Pilot Super Sports on the back (Fronts were changed a few months ago)
Changed rear diff oil
Alignment

toyosuprablue · 09-11-2015, 12:42 PM

Update:

Just had supercharger replaced fully under warranty. It actually went very smooth considering the mods I have. 25,500 miles but the blower has been making noise for quite some time.

toyosuprablue · 03-29-2016, 11:12 AM

I decided it was time to try a new look so I'm trying vinyl for the very first time. I went with 3M 1080 Matte Military Green. A little harder than I imagined and I expected it to be difficult. The camaro has a lot of easy sections and a lot of not so easy. Ended up overlapping and seaming a few sections that I originally expected to do in one piece. Here's some progress pics.

toyosuprablue · 03-29-2016, 11:16 AM

I'm almost finished with round 1. I say round 1 because I plan on buying some more vinyl and re-doing one or two sections that I did first while I was still learning the capabilities of the vinyl. I wish I took more progress shots but snapping photos isn't the first thing that comes to mind when I'm frustrated and that's how I spent most of this project... Just have the rear bumper left to do and then I will take a bunch of completed shots with my factory wheels back on for the season!

07-15-2015, 07:26 AM	#36
toyosuprablue Account Suspended Drives: 2013 ZL1 Black M6 Join Date: Dec 2012 Location: Nyack, NY Posts: 370 View My Garage	Update: Just clicked 22,000 miles. Starting to prep for CamaroFest: New Michelin Pilot Super Sports on the back (Fronts were changed a few months ago) Changed rear diff oil Alignment Last edited by toyosuprablue; 07-21-2015 at 07:27 AM.

04-08-2014, 01:46 PM	#31
toyosuprablue Account Suspended Drives: 2013 ZL1 Black M6 Join Date: Dec 2012 Location: Nyack, NY Posts: 370 View My Garage	Been doing a lot of reading on C5 and have finally decided to go to the next step. I have an appointment on Monday for a lower pulley and cam swap at JRE. Will post pics and dyno sheet sometime next weekend after I get her back

04-18-2014, 06:36 PM	#32
toyosuprablue Account Suspended Drives: 2013 ZL1 Black M6 Join Date: Dec 2012 Location: Nyack, NY Posts: 370 View My Garage	Just got home with my car from JRE. She went 652 rwhp 613 rwtq! Streetability is amazing. I couldn't be happier with the cam and lower pulley combo we put together. Special thanks goes out to the entire Jannetty Racing Enterprises team!

04-20-2014, 03:19 PM	#33
toyosuprablue Account Suspended Drives: 2013 ZL1 Black M6 Join Date: Dec 2012 Location: Nyack, NY Posts: 370 View My Garage	Some pics from the cam and pulley install:

04-20-2014, 03:37 PM	#34
BumblebeeQ8 Drives: '14 ZL1 Ashen Gray Metallic Join Date: Dec 2009 Location: Kuwait Posts: 191	Car looks and sounds mean !!

09-11-2015, 12:42 PM	#37
toyosuprablue Account Suspended Drives: 2013 ZL1 Black M6 Join Date: Dec 2012 Location: Nyack, NY Posts: 370 View My Garage	Update: Just had supercharger replaced fully under warranty. It actually went very smooth considering the mods I have. 25,500 miles but the blower has been making noise for quite some time.

03-29-2016, 11:12 AM	#38
toyosuprablue Account Suspended Drives: 2013 ZL1 Black M6 Join Date: Dec 2012 Location: Nyack, NY Posts: 370 View My Garage	I decided it was time to try a new look so I'm trying vinyl for the very first time. I went with 3M 1080 Matte Military Green. A little harder than I imagined and I expected it to be difficult. The camaro has a lot of easy sections and a lot of not so easy. Ended up overlapping and seaming a few sections that I originally expected to do in one piece. Here's some progress pics.

03-29-2016, 11:16 AM	#39
toyosuprablue Account Suspended Drives: 2013 ZL1 Black M6 Join Date: Dec 2012 Location: Nyack, NY Posts: 370 View My Garage	I'm almost finished with round 1. I say round 1 because I plan on buying some more vinyl and re-doing one or two sections that I did first while I was still learning the capabilities of the vinyl. I wish I took more progress shots but snapping photos isn't the first thing that comes to mind when I'm frustrated and that's how I spent most of this project... Just have the rear bumper left to do and then I will take a bunch of completed shots with my factory wheels back on for the season!