01-25-2020, 03:00 PM | #1 |
Drives: 2019 Camaro ZL1 Join Date: Jul 2019
Location: Pensacola
Posts: 98
|
New weld wheels setup!
Just wanted to show off a little bit and show you guys my new wheel setup. Not only does the car dead hook, but it drives great and really looks the part.
Also, car just made 749/772 stock heads/cam, pump 93, 100% meth and FBO Check out my buddy’s XXX ZL1’s post about it. Front : 18x6 Weld Alumastar 2.0 w/ Mickey Thompson SR 28x6.00 18 Part number : 88B-1806255 Rear : 17x10 Weld S71 Beadlock W/ Mickey Thompson 305/45 street R Part number : 71HB7100N72F Also, I added a 1/4 inch spacer to all 4 corners. IMO, it provides the perfect stance. Last edited by SlikZL1; 01-26-2020 at 10:40 AM. Reason: Updat |
01-25-2020, 03:23 PM | #2 |
AXLERODZL1
Drives: 2019 Riverside blue ZL1 Camaro Join Date: Dec 2018
Location: Carrollton, VA
Posts: 205
|
Congrats on your numbers man! John said its a beast!
__________________
'19 ZL1 A10 Riverside Blue PDR/Nav/Sunroof
Kong ported blower/snout Roto-Fab Big gulp 103 TB Lingenfelter Lower Pulley(9.17) 1 7/8 ARH headers and Exhaust Meth injection(single nozzle) 733whp/788tq |
01-25-2020, 03:27 PM | #3 |
Drives: 2019 Camaro ZL1 Join Date: Jul 2019
Location: Pensacola
Posts: 98
|
|
01-25-2020, 03:35 PM | #4 |
Drives: 2019 ZL1 Crush Join Date: Jan 2019
Location: Colorado Springs
Posts: 564
|
Looks awesome!!!
__________________
2019 Crush A10
E-Force 2650 670WHP 615WTQ All besides the 2650 is bone stock down to the air filter. |
01-25-2020, 03:38 PM | #5 |
902HP 858TQ
Drives: 2018 ZL1 A10 Join Date: May 2018
Location: New Jersey
Posts: 135
|
Totally transforms the look of the car. It looks great!
|
01-25-2020, 03:45 PM | #6 |
Drives: 2019 ZL1 Crush Join Date: Jan 2019
Location: Colorado Springs
Posts: 564
|
So I still need to turn, mine is a daily. Is this a confirmation that weld in 18" fits the front?
__________________
2019 Crush A10
E-Force 2650 670WHP 615WTQ All besides the 2650 is bone stock down to the air filter. |
01-25-2020, 03:49 PM | #7 |
Drives: 2019 Camaro ZL1 Join Date: Jul 2019
Location: Pensacola
Posts: 98
|
|
01-25-2020, 03:52 PM | #8 |
Drives: 2019 Camaro ZL1 Join Date: Jul 2019
Location: Pensacola
Posts: 98
|
Thanks! And Yeap! The alumastar is made for big brake cars like ours and Z06/ZR1 cars. There’s other 18x5, 18x6 welds that will fit our cars but most require a spacer and they unfortunately still don’t sit flush.
|
01-25-2020, 07:35 PM | #9 |
Drives: 2024 ZL1 M6 Join Date: Sep 2018
Location: Pace FL
Posts: 418
|
Now I’m ready to see those fronts off the ground tomorrow!
__________________
2024 Riverside Blue ZL1 M6
Magnuson 2650R, NW 103, Roto Fab Big Gulp, Jet Hot Coated ARH 2 inch LT's, Stainless Works NPP, Too High PSI Billet Valve Covers, Mighty Mouse Wild CC Signature Forged 20x10.5/20x11.5, 295/30-315/30, BMR springs, BMR Cradle lockout, AAD Billet Control/Trailing arms 2023 Vivid Orange ZL1 M6 - sold 2019 Riverside Blue ZL1 A10 - sold |
01-25-2020, 07:39 PM | #10 |
Drives: 2018 ZLE Join Date: Feb 2018
Location: Palm City Fl
Posts: 1,355
|
Looks mean, nice looking wheels.
|
01-25-2020, 07:51 PM | #11 |
2019 ZL1 1LE MY GOON
Drives: 1980 Z28 Big Red. Join Date: Dec 2018
Location: Stoney Creek
Posts: 2,061
|
Wow does that look awesome.
|
01-26-2020, 10:04 AM | #12 |
Drives: 2018 ZL1 1998 SS 1992 Typhoon Join Date: Nov 2015
Location: RR
Posts: 262
|
Great job, looks perfect. Thanks for providing all the specs.
|
01-26-2020, 10:21 AM | #13 |
Drives: 2019 Zl1 Camaro. Join Date: Jan 2020
Location: Parts unknown.
Posts: 2
|
That looks great! What backspace on the rear wheels do you have?
|
01-26-2020, 10:36 AM | #14 |
Drives: 2019 Camaro ZL1 Join Date: Jul 2019
Location: Pensacola
Posts: 98
|
Thanks guys!
|
|
|
Post Reply
|
|
|