L99 looking for a good shop in Houston - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

LHMO · 11-30-2017, 10:39 PM

Looking at doing stall, 3.91, and headers myself, but need to lock down a shop in Houston area for cam install and tune. Also decide on vvt/dod delete cam or full ls3 conversion. It seems everyone is all over the place with this argument. So help a brother out.

Smoke 'em · 12-01-2017, 01:16 AM

Can't go wrong with any of these. They are all awesome folks and are great at what they do.

- J-Rod's Speedshop
- MTI (Motorsport Technologies Inc)
- KP Racing
- PowerFab Automotive

Hope this helps.

Abelardoo_12 · 12-01-2017, 06:44 AM

Theres also Houston house of power, LMR, and G-force. I dont have any personal experience with any of them but they’re big name shops here in houston with good reputation.

ss camaro-monte · 12-01-2017, 07:03 PM

Had J rods do a little work on my car a few weeks ago and they are good. Just pulling up to the garage lets you know they work on ls based cars. There had to be 7 camaros, 5 vettes and several cts-vs they were working on at the time.

The seemed like a friendly bunch and price was reasonable for the work done.

tamucc2004 · 12-02-2017, 06:24 AM

I have my 2010 in at Triple Threat Racecraft right now getting a turbo setup. Smaller shop but very knowledgeable and had some very nice Camaro a vette builds going on when I dropped mine off. They are in Porter.

TXM62SS · 12-02-2017, 09:23 AM

J-Rod or GForce have always been good to me. Highly recommend.

LHMO · 12-03-2017, 06:46 PM

Thank you for the advice. I will check them out.

Punisher_ATX · 12-04-2017, 12:02 PM

Chuch at HHP for the win. We grind their cams in house here in Georgetown.

11-30-2017, 10:39 PM	#1
LHMO Drives: 2012 2SS L99 Join Date: Nov 2017 Location: Baytown, TX Posts: 3	L99 looking for a good shop in Houston Looking at doing stall, 3.91, and headers myself, but need to lock down a shop in Houston area for cam install and tune. Also decide on vvt/dod delete cam or full ls3 conversion. It seems everyone is all over the place with this argument. So help a brother out. __________________ Every part is pretty much a bolt-on. So just bolt-ons here.

12-01-2017, 01:16 AM	#2
Smoke 'em There's always a faster 1 Drives: (-,-) Join Date: Feb 2014 Location: Somewhere out there Posts: 201	Can't go wrong with any of these. They are all awesome folks and are great at what they do. - J-Rod's Speedshop - MTI (Motorsport Technologies Inc) - KP Racing - PowerFab Automotive Hope this helps. __________________ Sometimes we forget Have you thanked a soldier lately? "I believe that a man wearing a helmet to protect our country, our lives, and our freedom should be paid more than a man wearing a helmet to protect a leather ball." --Anonymous--

12-02-2017, 06:24 AM	#5
tamucc2004 Drives: 2010 SS Join Date: Oct 2016 Location: CS, TX Posts: 27	I have my 2010 in at Triple Threat Racecraft right now getting a turbo setup. Smaller shop but very knowledgeable and had some very nice Camaro a vette builds going on when I dropped mine off. They are in Porter. __________________ 2010 2SS, Stage 4 BTR Cam, AEM-CAI, Long Tube Headers, Borla Cat Back, Exhaust, In the Shop now for Turbo Build

12-02-2017, 09:23 AM	#6
TXM62SS Drives: 2012 2SS/RS LS3 Join Date: May 2012 Location: Pearland, TX Posts: 388	J-Rod or GForce have always been good to me. Highly recommend. __________________ Victory Red 2012 2SS/RS LS3 Camaro Pat G. Spec Cam from Cam Motion 228/236 .599/.599 112+2LSA Kooks 1-7/8" LTs w/ Cats Roto-Fab, Bo White TB, Borla Touring Catback 3.91 1LE Gears, MGW Tuned by Pat G

12-03-2017, 06:46 PM	#7
LHMO Drives: 2012 2SS L99 Join Date: Nov 2017 Location: Baytown, TX Posts: 3	Thank you for the advice. I will check them out. __________________ Every part is pretty much a bolt-on. So just bolt-ons here.

12-01-2017, 06:44 AM	#3
Abelardoo_12 Drives: 2011 camaro ss convertible Join Date: Oct 2015 Location: Houston, tx Posts: 421	Theres also Houston house of power, LMR, and G-force. I dont have any personal experience with any of them but they’re big name shops here in houston with good reputation.

12-01-2017, 07:03 PM	#4
ss camaro-monte Drives: 2015 camaro 2ss, 87 monte ss Join Date: Jun 2016 Location: Houston Posts: 242	Had J rods do a little work on my car a few weeks ago and they are good. Just pulling up to the garage lets you know they work on ls based cars. There had to be 7 camaros, 5 vettes and several cts-vs they were working on at the time. The seemed like a friendly bunch and price was reasonable for the work done.

12-04-2017, 12:02 PM	#8
Punisher_ATX Drives: 2010 SS Join Date: Jun 2015 Location: Austin Posts: 439	Chuch at HHP for the win. We grind their cams in house here in Georgetown.