Muffler delete...resonated x-pipe...quads - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Hollywood323 · 06-09-2015, 04:10 PM

So i got those big trash cans removed finally!

Replaced my H pipe with magna flow resonated x-pipe Part#11386
Got some 4 inch quad tips! Sounds amazing IMO!

Hollywood323 · 06-10-2015, 02:33 AM

Quote:

Originally Posted by Sanjay Collins

Awesome, I'm doing the same thing in a couple weeks. What 4" tips did you use?

Here you go brotha!
http://tips.byethost4.com/dualindividual.html

scdude37 · 06-10-2015, 08:13 AM

How did you cut the diffuser? It is a very clean cut.

arkentect · 06-10-2015, 08:35 AM

Damn man. That looks awesome! I just got my exhaust done pretty much the same but def wish I wouldve went with the Quad-Tips. +1 on how you cut the diffuser so cleanly.

dmginc · 06-10-2015, 09:42 AM

i have the same setup minus the quad tips, love the sound!

kraut1971 · 06-10-2015, 09:58 AM

Doing some simple math, you spent around $300 to pull this off (unless I'm missing something). That's a great price and exactly what I'm wanting to do on my 2LT.

How about a short video sharing the sound/tone of what you just accomplished?? Looks awesome. . . totally interested to hear how it turned out.

dmginc · 06-10-2015, 12:08 PM

Here are some vids of mine.

Cold start.

Drive by.

GoPro on back.

Hollywood323 · 06-10-2015, 02:45 PM

Fellas i didnt cut the diffuser haha i bought a 1le diffuser for $25 off a member from me!
Ill try to get some really good videos with quality sound so all you can here it...maybe by next week kinda busy haha. Btw i spent around $300 with parts and installation...better then spending $500 something on a axle back with regular tips! IMO this the best route for sound & looks!

dmginc · 06-10-2015, 03:40 PM

Quote:

Originally Posted by Sanjay Collins

@dmginc I posted your videos in a previous thread for someone asking about exhaust options. I love the ways your's sounds, that's what made me decide to do mine this way. Did you keep the factory 2.25 piping from the x-pipe to the tips? And what tips did you use?

i used the stock pipe from the x-pipe back, also kept stock resonators. had shop cut my stock tips off the garbage cans and re-used them.

dmginc · 06-10-2015, 03:47 PM

the covers are nice, was also good cause they allowed me to pass inspection here. if they had been tinted i would have had to remove the tine to pass.

dmginc · 06-10-2015, 04:18 PM

have to loosen the tail light a little then the top has hook like tabs and there is a part that slides under the tail light. they are fairly flush, i like them a lot. they cannot be stolen easily and if they are, they are not being reused.

schwartzeneger · 06-16-2015, 11:30 AM

Nice setup man. I have the same deal just haven't gotten the quad tips installed (yet).

Not to thread jack, but does anyone know if the 1LE diffuser and ZL1 diffuser are lined up for the exhaust ports the same? So if OP wanted to upgrade to a ZL1 diffuser would his tips line up perfect without modification? Thanks in advance

06-10-2015, 08:13 AM	#3
scdude37 Drives: 2010 Chevy Camaro SS Join Date: Oct 2014 Location: Hebron Posts: 134	How did you cut the diffuser? It is a very clean cut. __________________ 2010 Chevy Camaro LS3 CAI- Roto Fab

06-10-2015, 08:35 AM	#4
arkentect Drives: 2010 Camaro SGM 1LT M6 Join Date: Jan 2015 Location: Rochester, NY Posts: 1,630	Damn man. That looks awesome! I just got my exhaust done pretty much the same but def wish I wouldve went with the Quad-Tips. +1 on how you cut the diffuser so cleanly. __________________ Arkentect's Build Thread!! - UPSTATE C5 MEMBER 2010 SGM M6 1LT - SOLD Current - 2009 C6 Corvette Z51

06-10-2015, 09:42 AM	#5
dmginc Drives: In Circles Join Date: Mar 2011 Location: South Carolina Posts: 3,433 View My Garage	i have the same setup minus the quad tips, love the sound! __________________ CAI Cold Air Intake, BMR Strut Tower Brace, BMR 1.2" Lowering Springs Gen5DIY Fog Lights, Big Worm Third Brake Light/Side Marker Tint (Charcoal) GTS Tail Light Covers, Purple Under Hood Lighting Magnaflow Resonated X-Pipe w/ Muffler Delete Black Plasti Dipped Wheels, Z/28 Spoiler

06-10-2015, 09:58 AM	#6
kraut1971 BITCHN Camaro Drives: SOLD! Back in the looking zone... Join Date: Feb 2015 Location: Saline, MI Posts: 248 View My Garage	Doing some simple math, you spent around $300 to pull this off (unless I'm missing something). That's a great price and exactly what I'm wanting to do on my 2LT. How about a short video sharing the sound/tone of what you just accomplished?? Looks awesome. . . totally interested to hear how it turned out. __________________ BITCHN

06-10-2015, 12:08 PM	#7
dmginc Drives: In Circles Join Date: Mar 2011 Location: South Carolina Posts: 3,433 View My Garage	Here are some vids of mine. Cold start. Drive by. GoPro on back. __________________ CAI Cold Air Intake, BMR Strut Tower Brace, BMR 1.2" Lowering Springs Gen5DIY Fog Lights, Big Worm Third Brake Light/Side Marker Tint (Charcoal) GTS Tail Light Covers, Purple Under Hood Lighting Magnaflow Resonated X-Pipe w/ Muffler Delete Black Plasti Dipped Wheels, Z/28 Spoiler

06-09-2015, 04:10 PM	#1
Hollywood323 Drives: 2013 Camaro 1LT/RS Join Date: Oct 2012 Location: Hollywood, California Posts: 127	Muffler delete...resonated x-pipe...quads So i got those big trash cans removed finally! Replaced my H pipe with magna flow resonated x-pipe Part#11386 Got some 4 inch quad tips! Sounds amazing IMO! Attached Images

06-10-2015, 02:45 PM	#8
Hollywood323 Drives: 2013 Camaro 1LT/RS Join Date: Oct 2012 Location: Hollywood, California Posts: 127	Fellas i didnt cut the diffuser haha i bought a 1le diffuser for $25 off a member from me! Ill try to get some really good videos with quality sound so all you can here it...maybe by next week kinda busy haha. Btw i spent around $300 with parts and installation...better then spending $500 something on a axle back with regular tips! IMO this the best route for sound & looks!

06-10-2015, 03:47 PM	#10
dmginc Drives: In Circles Join Date: Mar 2011 Location: South Carolina Posts: 3,433 View My Garage	the covers are nice, was also good cause they allowed me to pass inspection here. if they had been tinted i would have had to remove the tine to pass. Attached Images __________________ CAI Cold Air Intake, BMR Strut Tower Brace, BMR 1.2" Lowering Springs Gen5DIY Fog Lights, Big Worm Third Brake Light/Side Marker Tint (Charcoal) GTS Tail Light Covers, Purple Under Hood Lighting Magnaflow Resonated X-Pipe w/ Muffler Delete Black Plasti Dipped Wheels, Z/28 Spoiler

06-10-2015, 04:18 PM	#11
dmginc Drives: In Circles Join Date: Mar 2011 Location: South Carolina Posts: 3,433 View My Garage	have to loosen the tail light a little then the top has hook like tabs and there is a part that slides under the tail light. they are fairly flush, i like them a lot. they cannot be stolen easily and if they are, they are not being reused. __________________ CAI Cold Air Intake, BMR Strut Tower Brace, BMR 1.2" Lowering Springs Gen5DIY Fog Lights, Big Worm Third Brake Light/Side Marker Tint (Charcoal) GTS Tail Light Covers, Purple Under Hood Lighting Magnaflow Resonated X-Pipe w/ Muffler Delete Black Plasti Dipped Wheels, Z/28 Spoiler

06-16-2015, 11:30 AM	#12
schwartzeneger Drives: 2013 Crystal Red Tintcoat Join Date: Oct 2013 Location: Madison - Wisconsin Posts: 61	Nice setup man. I have the same deal just haven't gotten the quad tips installed (yet). Not to thread jack, but does anyone know if the 1LE diffuser and ZL1 diffuser are lined up for the exhaust ports the same? So if OP wanted to upgrade to a ZL1 diffuser would his tips line up perfect without modification? Thanks in advance