Ever Wonder how a 1LE with Racing Seats and Rollcage looked? Check Here!!! - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Camaro Dude · 06-15-2014, 04:37 PM

Me likey.

markgws6 · 06-15-2014, 11:40 PM

Your car is now yelling for you to "take me to the track!". How much did the seats set you back? And I see you kept the rear seat in. Any particular reason for that? Since I doubt anyone will be able to "fit" back there. Maybe you just like the looks of them.

Lio Martinez · 06-15-2014, 11:48 PM

Quote:

Originally Posted by markgws6

Your car is now yelling for you to "take me to the track!". How much did the seats set you back? And I see you kept the rear seat in. Any particular reason for that? Since I doubt anyone will be able to "fit" back there. Maybe you just like the looks of them.

Yes it is literally asking to be abused in the track.

Seats were $700 each . Plus all the other components were extra like Sparco seat bases specifically for the Camaro. Side mounts , rail tracks , and harness .

Plus the Roll bar was $1700

And yeah not at this point nobody can fit in the back. I just kept the back seat because I do like the look of all. Since I got some inferno orange oem leather that got an installed in the 1LE cause as you know the 1LE only comes in black leather. So I searched and bought a complete almost new leather kit from a member here. So the colors match the front seats a bit .

The rear seat does not even weight at all. Plus I have no space to keep it in my garage so the best way was to keep it in the car.

I also kept the front oem seat in case I ever want to go back to them or I get to fat and don't fit in this racing seats.

Apex Motorsports · 06-16-2014, 07:14 AM

Very nice. How do you like the seats?

cornerspeed92 · 06-16-2014, 02:39 PM

Look great Lio, when are you going to put this hot rod on Fontana?

Lio Martinez · 06-16-2014, 02:58 PM

Quote:

Originally Posted by Apex Chase

Very nice. How do you like the seats?

I love this seats. The looks and feel. The only down side is getting in and out. And still need to get used to the 6 point harness . But they really hold me in place. But I still have space to stretch my legs. I'm amazed by them . Really love this mid and they go so well with the RPM roll bar

Lio Martinez · 06-16-2014, 02:59 PM

Quote:

Originally Posted by cornerspeed92

Look great Lio, when are you going to put this hot rod on Fontana?

Corner speed where do you live again ? How much is it to go ?

I'm literally dying to go man. That why I built this car for the track . I just need a go pro camera .

cornerspeed92 · 06-16-2014, 05:21 PM

Hey Lio im only 7 miles from the track, it's $190.00 for the day,actually not a bad price.

Lio Martinez · 06-16-2014, 05:53 PM

It's 2 hours and a half away from me

BMR Sales · 06-17-2014, 11:15 AM

Lio, looks awesome man, I absolutely love the seats!!! Glad to hear you finally got all you suspension parts installed. Waiting to hear your review after your next track day!!!

Lio Martinez · 06-17-2014, 10:59 PM

Quote:

Originally Posted by BMR Sales

Lio, looks awesome man, I absolutely love the seats!!! Glad to hear you finally got all you suspension parts installed. Waiting to hear your review after your next track day!!!

Hopefully I can tag along with Cornerspeed for the track day at Fontana

Monte Mac · 06-22-2014, 03:18 PM

Looks good, only question/concern I have is how the belts are mounted. It looks like the shoulder belts go through the seat and to the floor. Is that how they are? I'm pretty sure that they should go straight back to prevent spine injuries. I'm no expert, I would just hate to see someone get hurt trying to do the right thing installing safety equipment in their car. Good luck when you do track it! Have fun and be safe!

Lio Martinez · 06-22-2014, 04:51 PM

Quote:

Originally Posted by Monte Mac

Looks good, only question/concern I have is how the belts are mounted. It looks like the shoulder belts go through the seat and to the floor. Is that how they are? I'm pretty sure that they should go straight back to prevent spine injuries. I'm no expert, I would just hate to see someone get hurt trying to do the right thing installing safety equipment in their car. Good luck when you do track it! Have fun and be safe!

I'm using thank plates that's why the harness go all the way down.

Don't get me wrong I'm no expert at all. But I took the seats to a shop were they build race cars to get them insralled

hammdo · 06-22-2014, 04:55 PM

That is an awesome interior! Can you DD with those seats without killing 'us old guys' backs?

Just love the looks of those....

Jem!

-Don

06-15-2014, 11:40 PM	#16
markgws6 Drives: 2019 Chevy Equinox Premier AWD Join Date: Mar 2011 Location: Silicon Valley, CA Posts: 1,344 View My Garage	Your car is now yelling for you to "take me to the track!". How much did the seats set you back? And I see you kept the rear seat in. Any particular reason for that? Since I doubt anyone will be able to "fit" back there. Maybe you just like the looks of them. __________________ 2013 AGM 1SS/1LE, NPP, Camera (1 of 43)

06-16-2014, 02:39 PM	#19
cornerspeed92 Drives: 2013 1SS 1LE Join Date: Jul 2012 Location: Colorado Posts: 4,188 View My Garage	Look great Lio, when are you going to put this hot rod on Fontana? __________________

06-16-2014, 05:21 PM	#22
cornerspeed92 Drives: 2013 1SS 1LE Join Date: Jul 2012 Location: Colorado Posts: 4,188 View My Garage	Hey Lio im only 7 miles from the track, it's $190.00 for the day,actually not a bad price. __________________

06-22-2014, 03:18 PM	#26
Monte Mac Drives: 13 1LE, 17 Sierra, 84 MonteSS, Join Date: May 2009 Location: Deaborn Heights, MI Posts: 454 View My Garage	Looks good, only question/concern I have is how the belts are mounted. It looks like the shoulder belts go through the seat and to the floor. Is that how they are? I'm pretty sure that they should go straight back to prevent spine injuries. I'm no expert, I would just hate to see someone get hurt trying to do the right thing installing safety equipment in their car. Good luck when you do track it! Have fun and be safe! __________________ [B]Ordered 3/8/13 TPW 4/15/13 Built 4/15/13 Bayed 4/18/13 Released from QC HOLD 5/22/13 PERMAGRIN INSTALLED 5/30/13

06-15-2014, 04:37 PM	#15
Camaro Dude Drives: ‘13 1LE Join Date: Jul 2013 Location: Earth Posts: 3,904	Me likey.

06-16-2014, 07:14 AM	#18
Apex Motorsports Drives: 2000 Camaro SS Join Date: Feb 2010 Location: Louisville, Ky. Posts: 25,179	Very nice. How do you like the seats?

06-16-2014, 05:53 PM	#23
Lio Martinez Account Suspended Drives: 2013 Camaro 2SS RS 1LE IMO Turbo Join Date: Jan 2011 Location: Oxnard. CA Posts: 1,747 View My Garage	It's 2 hours and a half away from me

06-17-2014, 11:15 AM	#24
BMR Sales Drives: Race Car Join Date: Sep 2009 Location: Seffner, FL Posts: 6,226	Lio, looks awesome man, I absolutely love the seats!!! Glad to hear you finally got all you suspension parts installed. Waiting to hear your review after your next track day!!!

06-22-2014, 04:55 PM	#28
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,694 View My Garage	That is an awesome interior! Can you DD with those seats without killing 'us old guys' backs? Just love the looks of those.... Jem! -Don