Eibach Pro-Kit: Front Drivers Side sits 5/16" HIGHER than Passenger, Normal?

Arugon · 01-09-2018, 10:36 PM

Hey guys, finally got around to getting my Eibach Pro-Kit installed today and noticed that my front Drivers side sits roughly 5/16" higher than the passenger side does. Rear's match up perfectly though.

Anyone know if this is normal? You can see the difference just by looking at it.

kropscamaro16 · 01-10-2018, 10:13 AM

pretty normal but you need to let the kit settle and then go get alignment and it may change who knows!

17txcamaross · 01-10-2018, 12:35 PM

Yes, this is probably normal. Go get your alignment taken care of and make sure to clock the bushings before they align. I don't have the pro kit, but I do have the Phastek springs. Took my springs a week or so to fully settle with daily commute to work of 15 miles round trip.

Arugon · 01-10-2018, 02:00 PM

Quote:

Originally Posted by 17txcamaross

Yes, this is probably normal. Go get your alignment taken care of and make sure to clock the bushings before they align. I don't have the pro kit, but I do have the Phastek springs. Took my springs a week or so to fully settle with daily commute to work of 15 miles round trip.

Well the shop I went to did an alignment after the install, they drove it a bit before and told me that the springs shouldn’t settle much more, maybe 5% more.

I’m wondering if I should go down there and ask them to make sure everything is tight.

SilverSS1LE · 01-10-2018, 07:38 PM

Quote:

Originally Posted by 17txcamaross

Yes, this is probably normal. Go get your alignment taken care of and make sure to clock the bushings before they align. I don't have the pro kit, but I do have the Phastek springs. Took my springs a week or so to fully settle with daily commute to work of 15 miles round trip.

Ive seen a couple people referring to this, what do you mean by clocking the bushings?

glenB · 01-10-2018, 08:04 PM

I had Eibach springs on an SS Sedan and the left rear was higher. Of course it's always 'this is a first, ever'. So after doing their requested measurements they gave me a return # so they could test them. After a week and 3 calls I was told that it was bad and they gave me a new rear set.

01-09-2018, 10:36 PM	#1
Arugon Drives: Summit White Camaro SS Join Date: Jul 2017 Location: California Posts: 359	Eibach Pro-Kit: Front Drivers Side sits 5/16" HIGHER than Passenger, Normal? Hey guys, finally got around to getting my Eibach Pro-Kit installed today and noticed that my front Drivers side sits roughly 5/16" higher than the passenger side does. Rear's match up perfectly though. Anyone know if this is normal? You can see the difference just by looking at it. __________________

01-10-2018, 10:13 AM	#2
kropscamaro16 Drives: 2016 1ss camaro Join Date: Feb 2016 Location: 909 Posts: 9,813	pretty normal but you need to let the kit settle and then go get alignment and it may change who knows! __________________ 16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS

01-10-2018, 12:35 PM	#3
17txcamaross Drives: 2017 Camaro 2SS Join Date: Dec 2016 Location: Houston Posts: 469	Yes, this is probably normal. Go get your alignment taken care of and make sure to clock the bushings before they align. I don't have the pro kit, but I do have the Phastek springs. Took my springs a week or so to fully settle with daily commute to work of 15 miles round trip.

01-10-2018, 08:04 PM	#6
glenB Drives: Chevrolet Camaro SS Join Date: Mar 2015 Location: Planet Earth Posts: 721	I had Eibach springs on an SS Sedan and the left rear was higher. Of course it's always 'this is a first, ever'. So after doing their requested measurements they gave me a return # so they could test them. After a week and 3 calls I was told that it was bad and they gave me a new rear set.

User Name		Remember Me?
Password