01-26-2018, 09:21 AM | #1 |
Drives: 2019 ZL1 1LE A10 Join Date: Jan 2015
Location: The ATX
Posts: 966
|
DIY: ZL1 pull-strap for your trunk
Hello ZL1 owners,
The trunk closing situation REALLY bothers me on my ZL1 because I daily drive it and use the trunk for my work&fitness bags or items every time. So I came up with this ultra simple solution that anyone can do that is fairly handy. Parts needed: Nylon Strap (I bought mine here https://www.ebay.com/itm/FIAT-500-Ab...vy-Duty-Nylon/) Tools needed: Exacto Knife, T30 Torx, Trim removal tool step 1) Remove the trunk liner step 2) Use T30 Torx to remove the passenger side trunk latch fastener step 3) Push fastener through the strap and re-install step 4) Cut the slot just to the top right of the manual release access hole step 5) Reinstall the liner and run the strap through the hole. Step 6) Never scratch your paint again or put fingerprints on your trunk! Enjoy your "Ryker" Mod & Have a nice day!
__________________
Ryker #29
2019 ZL1 1LE A10 2015 Z/28 #809 Last edited by Sakudog; 01-27-2018 at 11:44 PM. |
01-26-2018, 09:42 AM | #2 |
Drives: 2017 Camaro SS 1LE (F1A-94 FBO H/C) Join Date: Jun 2017
Location: San Antonio Texas
Posts: 843
|
This is awesome!!!!
__________________
Performance Mods: F1A-94, DSX Flex Fuel Kit, MSD Spark Plug Wires, KOOK 2" off road headers, MBRP Race catback exhaust, Pray Performance Custom Boost Cam, Rocker Arm Trunion Upgrade Kit, 7.850" Hardened Chromemoly Length Pushrods and Johnson Racing 2110R Lifters, TSP CNC'd Heads, Ported MSD intake manifold, 103mm Katech Throttle body, Forged Pistons/Rods, RPM Meth kit, DSX Aux Fuel system, AEM Failsafe and banks gauge, LT4 HPFP, LT4 injectors, BMR motor mounts, Hurst Short Throw, Manley SS exhaust valves
Videos of my car? Check here: https://www.youtube.com/channel/UCNi...Qy1OL4NVGlPogw |
01-26-2018, 09:48 AM | #3 |
Drives: Camaro SS Nightfall Gray Metallic Join Date: Feb 2017
Location: CT
Posts: 32
|
Nice work, looks great!
|
01-26-2018, 10:16 AM | #4 |
Drives: 2017 ZL1, 2015 Z51 vette 2005 gto Join Date: Sep 2009
Location: New Castle,pa
Posts: 252
|
going to do that asap
__________________
|
01-26-2018, 10:21 AM | #5 |
Drives: 20 X3M CP & 19 ZL1 1LE A10 Join Date: Jun 2013
Location: Brenham, TX
Posts: 3,517
|
Bottom line is this should be called the “Ryker Mod.” Real talk. Patent and sell this item. Nice work.
__________________
🔺22 RS E TRON GT
🔺21 Model S Plaid |
01-26-2018, 10:22 AM | #6 |
Drives: 2019 ZL1 1LE A10 Join Date: Jan 2015
Location: The ATX
Posts: 966
|
"RYKER Mod" it is...
__________________
Ryker #29
2019 ZL1 1LE A10 2015 Z/28 #809 |
01-26-2018, 10:24 AM | #7 |
Drives: 2017 Ford F250, 2019 Lincoln Navi Join Date: Apr 2016
Location: Houston, TX
Posts: 391
|
Nice work! Wifey mentioned the other day the trunk didn't have a spot to close it. Great fix!
__________________
Instagram: MattZ_L1 Vengeance Racing Built
|
01-26-2018, 10:27 AM | #8 |
Drives: 2017 1SS/1LE Join Date: Sep 2016
Location: FL Panhandle
Posts: 1,559
|
If only someone had thought of this before... haha
http://www.camaro6.com/forums/showth...ighlight=strap |
01-26-2018, 10:27 AM | #9 |
Drives: 2017 NGM ZL1 Join Date: May 2015
Location: Galloway, OH
Posts: 44
|
This is brilliant, for real though send me your paypal and I'll shoot you a few bucks because I've needed this so badly and never even put two and two together |
01-26-2018, 10:27 AM | #10 |
Drives: Crush ZLE M6 | 2000 Corvette FRC Join Date: Jun 2010
Location: Cencal
Posts: 1,659
|
Looks great! I usually just carefully make sure to only touch the flat/Black bow tie when closing the trunk which doesn’t retain any kind of prints. This looks to be much easier.
|
01-26-2018, 10:41 AM | #11 |
Drives: 2019 ZL1 1LE A10 Join Date: Jan 2015
Location: The ATX
Posts: 966
|
That is very nice of you! Here is a better idea, why don't you take that money and give it to a local Food Bank. I grew up very poor and Food Bank's fed me and my Mother more than once, do that instead.
__________________
Ryker #29
2019 ZL1 1LE A10 2015 Z/28 #809 |
01-26-2018, 10:43 AM | #12 | |
Drives: 2019 ZL1 1LE A10 Join Date: Jan 2015
Location: The ATX
Posts: 966
|
Quote:
__________________
Ryker #29
2019 ZL1 1LE A10 2015 Z/28 #809 |
|
01-26-2018, 11:08 AM | #13 |
Drives: 2016 Z06, 2017 ZL1 Join Date: Feb 2012
Location: Las Vegas
Posts: 305
|
|
01-26-2018, 12:05 PM | #14 |
Drives: 2017 ZL1 A10 Nightfall Gray Join Date: Jul 2017
Location: Fort Lauderdale
Posts: 236
|
This is great man. Thank you for taking your time and energy to share this with us. Effort like this is what makes being apart of this community great. GM should have installed this from the factory. Will work on this project next weekend.
|
|
|
Post Reply
|
|
|