New 2 piece wicker bill for 1LE in stock!

[CurtiSSWatson]

Originally Posted by markgws6

I have the same question. I'd like to see a complete package - Front and Rear for the 10-13, since these years cannot use chevy's Z/28 aero package.

+1

[Dropspeed]

Originally Posted by markgws6

I have the same question. I'd like to see a complete package - Front and Rear for the 10-13, since these years cannot use chevy's Z/28 aero package.

I think they stated they will not be doing anything for the front. With that being said I would absolutely not install a wicker bill on a 10-13 if you track the car. If you want it for looks it should be ok at highway speeds, but as you get near triple digit speeds and above it will upset the car and create too much downforce in the rear while creating even more lift in the front than the car inherently has.

[ZYBORG]

Originally Posted by Infantryman11C

took me about 30 min and a phone call to ZL1 addons to install my new 2 piece wicker bill. looks amazing.

Good any more pics of your car from the rear but from farther back?

[olblue75]

Originally Posted by Dropspeed

I think they stated they will not be doing anything for the front. With that being said I would absolutely not install a wicker bill on a 10-13 if you track the car. If you want it for looks it should be ok at highway speeds, but as you get near triple digit speeds and above it will upset the car and create too much downforce in the rear while creating even more lift in the front than the car inherently has.

But there are factory splitter options for the 10-13s and splitter extensions too from Aero Concepts and APR (I believe) and look what Pete is doing with Alminum. So as long as you keep the car balanced no reason not to buy a wicker. Also ACS makes a Z/28 spoiler for 10-13s....

Then there's the belly pans either after market or factory..

[Skylane765]

The front is a different issue, you can get many style splitters. We were asked to make the wicker bill.

[Skylane765]

Originally Posted by CurtiSSWatson

Let me be more specific for you, Almighty One, better angles. Your pics are focused directly on the spoiler, can we get some shots of the full body, to see how it looks in proportion to the car. Our cars are rather large, and the 2011 SS spoiler is rather small. Id like to see how it looks in contrast to that so I can decide if I want to go the bigger route of the ZL1 or Z28 spoiler + wicker bill.

also, you , I asked about 2010-2013, you have a 2014. Believe it or not, our rear ends look different. If there is a pic of the 2010-2013 with the wicker on a SS spoiler, the pic isn't compatible with this computer; hence Im asking

geez, can a consumer consume?

If some one would bring there car I will install free on a 10 to 13 SS 1LE

[Houseofhotrods]

Originally Posted by Skylane765

If some one would bring there car I will install free on a 10 to 13 SS 1LE

On the fence in Oregon....

[CurtiSSWatson]

I will be doing business with you for the 2011 SS spoiler wicker, once I can see it more on the car. DIRE NEED lol

[SunnySideUpII]

It looks real cool and something I would consider. However my concern would be water creeping in between the dark plastic piece and the transparent piece.

It is impossible to dry that area and eventually when it evaporates may leave water marks and discoloration, etc.

Is there a perfect seal between these parts to prevent water from sneaking in?

[Skylane765]

Originally Posted by SunnySideUpII

It looks real cool and something I would consider. However my concern would be water creeping in between the dark plastic piece and the transparent piece.

It is impossible to dry that area and eventually when it evaporates may leave water marks and discoloration, etc.

Is there a perfect seal between these parts to prevent water from sneaking in?

That's the same thing that we have with the Corvette. But it never shows up at all on the Camaro. You could seal it if you want but just remove it and clean it. its only a few screws. The Corvette with the Aero3 kit shows up some but on my Z/28 it does not because it is tight and the Corvette is not.

[SunnySideUpII]

Originally Posted by Skylane765

That's the same thing that we have with the Corvette. But it never shows up at all on the Camaro. You could seal it if you want but just remove it and clean it. its only a few screws. The Corvette with the Aero3 kit shows up some but on my Z/28 it does not because it is tight and the Corvette is not.

Yeah, quite a bit of hassle to unscrew-clean-screw back everytime I wash the car or it rains (Not that it rains a lot here, but still).

I would probably use waterless wash around that area or have a real thin seal that will not affect the look.

[LAMAKINA2]

ugh in Florida... Damn

[pistolgripcopo1]

very nice product

[DadVet68]

Any pics on a 2013 yet?