08-23-2019, 02:37 PM | #1 |
Drives: 2015 Topless Btch RS Join Date: Mar 2016
Location: Montreal...Land of mostly Mustangs
Posts: 574
|
Convertible Rattle
The piece that hold the handle in place is loose and causing a rattle, any ideas in how to repair? Thanks
|
08-24-2019, 11:22 AM | #2 |
Drives: 14 2SS/RS Triple Black Ragtop LS3 Join Date: Mar 2014
Location: California Bay Area 95008
Posts: 305
|
I have not had this piece off, so I don't know. You might want to try the convertible sub-forum. https://www.camaro5.com/forums/forumdisplay.php?f=133
Just a thought. -EN
__________________
Come see the violence inherent in the sysadmin.
|
08-25-2019, 12:03 PM | #3 |
Camaro owner since 1982
Drives: 2012 Camaro 2SS-RS Conv IBM L99 Join Date: Jul 2009
Location: PA
Posts: 1,651
|
The screw mounts break on these large plastic pieces. Last I looked that piece was around 40.00, I personally never changed one so I cant comment how hard it may be
__________________
2012 Camaro RS-SS Conv IBM, L99
1968 Camaro RS Coupe 327 AT 1968 Camaro RS-SS Conv, sold 1993 |
02-18-2020, 11:07 AM | #4 |
Drives: 2015 Topless Btch RS Join Date: Mar 2016
Location: Montreal...Land of mostly Mustangs
Posts: 574
|
Bump
|
02-18-2020, 11:19 AM | #5 |
Foam tape that’s what I did.....
|
|
|
|
|
|