Cold Air Inductions Inc's Hyper Blue Met. 16' Camaro 2ss! Intake teaser pic inside! - Page 35

HyperBlueX2 · 09-22-2016, 10:48 AM

Quote:

Originally Posted by AdmAnt13

What does this thing look like..

It is a spacer between the throttle body and intake with a built in airfoil on the bottom that sticks up about .5 to .75 inches...

Sales @ CAI Inc · 09-22-2016, 03:00 PM

Quote:

Originally Posted by DisturbedSS

The Inductions CAI intake was my first mod on the 2016 SS and hands down best made intake out of 6 previous vendor intakes installed on different vehicles. The pyramid shaped window sealed box and easy access is nice - the heat shield inside is brilliant.

Data logging the vehicle afterwords showed some issues on idle - need to make sure your MAF is rotated correctly (use the arrow on the intake) I rotated it off somewhat during installation, so thats on me. Overall however, worth every penny!

I wish all aftermarket parts were made this well. Nice work.

Thank you!!! We are glad to hear that you are happy with your Cold Air Inductions, Inc. 2016 Camaro cold air intake system. We spend a great deal of time in the R&D department to ensure that we get it right and we always strive to deliver the highest quality system in the market!

Also, thanks for the reminder to everyone that it is critical to have the MAF rotated properly by using the arrow. Thanks again, we really do appreciate it!!

keon718nyc · 09-22-2016, 04:58 PM

Got the TB whistle eliminator part in today and finished installing it as i removed the Roto-Fab CAI i had on there. I can confirm that now the whistle noise caused by the stock TB on my Camaro has been eliminated and very happy with the results. I got some of the low end range back and can hear a nice air/swoosh noise moving through the system. Thank you again Cold Air Inductions for coming through with the part needed for some of us!

i007spectre · 09-22-2016, 05:14 PM

So anyone who orders a kit now should get the updated one with the spacer?

Hyper16 · 09-22-2016, 05:38 PM

Quote:

Originally Posted by keon718nyc

Got the TB whistle eliminator part in today and finished installing it as i removed the Roto-Fab CAI i had on there. I can confirm that now the whistle noise caused by the stock TB on my Camaro has been eliminated and very happy with the results. I got some of the low end range back and can hear a nice air/swoosh noise moving through the system. Thank you again Cold Air Inductions for coming through with the part needed for some of us!

So you prefer the CAI CAI over Roto-Fab CAI? Any special reason(s)?

keon718nyc · 09-22-2016, 06:19 PM

Quote:

Originally Posted by Hyper16

So you prefer the CAI CAI over Roto-Fab CAI? Any special reason(s)?

Honestly at this point i do prefer the CAI CAI over the Roto-Fab. If i were to add more upgrades to my engine or exhaust i would have kept the Roto-Fab possibly in but i feel i lost some low end power and gained a tad mid to high instead. The sound and low end power for me made my mind up to stay with the CAI CAI. I just was waiting on the throttle body whistle eliminator to arrive today and install to really see the difference between the 2. Just my opinions....

AdmAnt13 · 09-22-2016, 07:08 PM

When will people (if at all) be able to purchase this part of they have another brand of intake?

Algeron · 09-22-2016, 08:48 PM

Got mine in today. I plan on grabbing a torque wrench and installing on Saturday.

Sales @ CAI Inc · 09-23-2016, 07:40 AM

Quote:

Originally Posted by keon718nyc

Got the TB whistle eliminator part in today and finished installing it as i removed the Roto-Fab CAI i had on there. I can confirm that now the whistle noise caused by the stock TB on my Camaro has been eliminated and very happy with the results. I got some of the low end range back and can hear a nice air/swoosh noise moving through the system. Thank you again Cold Air Inductions for coming through with the part needed for some of us!

We are very pleased that you are happy with the whistle eliminator part. We know is was a longer wait than our customers wanted but we had to get it right. Thanks again for your support and we love that you have our system back on your ride!!

HyperBlueX2 · 09-23-2016, 08:05 AM

I also have no more whistle.....

Issue resolved......

Thanks CAI!

JonGSA · 09-23-2016, 08:15 AM

Great to hear everyone is getting their whistle fixed!

Not to brag, but my car never had the whistle so I didn't waste CAI's time and money to get one. But....would this part help anyone with a CAI? Meaning, is there a performance gain (even if ever so slightly) to get from this part? When KeonNYC said he got some more low end out of it, it got the gears turning a little....

keon718nyc · 09-23-2016, 08:54 AM

I honestly don't think the part made any change in performance (I could be wrong) as the CAI just feels like its bringing in more air then the previous intake i had on there. The sound is what it is now supposed to be and my low end gears seem to be more responsive. I lost some lower end previously with the Roto-Fab intake but i am not at all knocking that CAI as it worked and sounded fine, i just feel that the Cold Air Inductions intake on my stock Camaro made more of a difference i can see. I have no doubt that the Roto-Fab is quality and a good product, but after switching them back and fourth i am happy now with what i have... The part they made seems purely to stop any TB whistles by rerouting the air a certain way into the throttle body muffling any unwanted noises. It took about 10 minutes to put the part in place or less and i couldn't be more pleased!

Sales @ CAI Inc · 09-23-2016, 11:46 AM

Quote:

Originally Posted by i007spectre

So anyone who orders a kit now should get the updated one with the spacer?

That is correct. Anyone that purchases our Cold Air Inductions, Inc. 2016+ Camaro cold air intake system will receive the part. Also, anyone that previously purchased our system can request the part (free of charge). Thanks!

Sales @ CAI Inc · 09-23-2016, 03:43 PM

Quote:

Originally Posted by Hyperblue16vert

I also have no more whistle.....

Issue resolved......

Thanks CAI!

You are welcome! Thanks for your support!!!

09-22-2016, 05:14 PM	#480
i007spectre Drives: 2016 2SS, 2008 HHR ECTO-2H Join Date: Aug 2009 Location: Springfield, Mo Posts: 1,927 View My Garage	So anyone who orders a kit now should get the updated one with the spacer? __________________ 2016 Camaro 2SS. Hyper Blue, Ceramic White, Auto, MRC, and NPP. 1100 - 9/25 2000 - 9/28 3000 - 9/30 3100 - 10/27 3300 - 10/28 3400 - 10/29 TPW 11/09 3800 - 11/10 4300 - 11/24 4B00 - 11/25 4200 - 12/5 5000 - 12/7 6000 - 12/11

09-22-2016, 07:08 PM	#483
AdmAnt13 Drives: '16 Red Hot 2SS M6 NPP Join Date: Apr 2016 Location: The Beach, NC Posts: 603	When will people (if at all) be able to purchase this part of they have another brand of intake? __________________ '16 2SS, M6, Borla Atak

09-22-2016, 08:48 PM	#484
Algeron Drives: 2023 ZL1 Convertible, 1998 Z28 Join Date: Jan 2013 Location: Charleston, SC Posts: 915 View My Garage	Got mine in today. I plan on grabbing a torque wrench and installing on Saturday. __________________ 2023 Rapid Blue ZL1 Convertible

09-23-2016, 08:05 AM	#486
HyperBlueX2 Drives: '22 Silverado 2500HD Duramax LTZ Join Date: Dec 2015 Location: Millington, MI Posts: 4,775 View My Garage	I also have no more whistle..... Issue resolved...... Thanks CAI! __________________

09-23-2016, 08:15 AM	#487
JonGSA Drives: 2016 2SS Hyper Blue Join Date: Apr 2016 Location: CT Posts: 174	Great to hear everyone is getting their whistle fixed! Not to brag, but my car never had the whistle so I didn't waste CAI's time and money to get one. But....would this part help anyone with a CAI? Meaning, is there a performance gain (even if ever so slightly) to get from this part? When KeonNYC said he got some more low end out of it, it got the gears turning a little.... __________________ '16 2SS Hyper Blue Metallic - M6 - NPP - MRC -Black bowties - CAI Intake - SW Cat Back w/NPP Other money pits: '13 S1000RR '11 R1200 GS Adventure '01 HD Sporty 1250

09-22-2016, 04:58 PM	#479
keon718nyc Drives: Challenger SP Shaker/Arcadia Denali Join Date: Jan 2016 Location: New York City Posts: 1,928	Got the TB whistle eliminator part in today and finished installing it as i removed the Roto-Fab CAI i had on there. I can confirm that now the whistle noise caused by the stock TB on my Camaro has been eliminated and very happy with the results. I got some of the low end range back and can hear a nice air/swoosh noise moving through the system. Thank you again Cold Air Inductions for coming through with the part needed for some of us!

09-23-2016, 08:54 AM	#488
keon718nyc Drives: Challenger SP Shaker/Arcadia Denali Join Date: Jan 2016 Location: New York City Posts: 1,928	I honestly don't think the part made any change in performance (I could be wrong) as the CAI just feels like its bringing in more air then the previous intake i had on there. The sound is what it is now supposed to be and my low end gears seem to be more responsive. I lost some lower end previously with the Roto-Fab intake but i am not at all knocking that CAI as it worked and sounded fine, i just feel that the Cold Air Inductions intake on my stock Camaro made more of a difference i can see. I have no doubt that the Roto-Fab is quality and a good product, but after switching them back and fourth i am happy now with what i have... The part they made seems purely to stop any TB whistles by rerouting the air a certain way into the throttle body muffling any unwanted noises. It took about 10 minutes to put the part in place or less and i couldn't be more pleased!

User Name		Remember Me?
Password