Fully Photoshop-rendered and de-camoed front, side and rear 2016 Camaro

chazcron · 10-13-2014, 10:51 PM

I took a stab at a rear de-camo.This time I went full quality by using an actual Camaro photo at a similar angle and grafted it on to the camo shot. By comparison, my initial front de-camo render looks a little rough.

I find grafting a photo to the actual camo image gives a really accurate impression of the stance and proportion of the car, since the wheels are the real deal.

Go ahead and hate on the headlights and taillights, they are only a guess/placeholder. Any critique negative or positive is appreciated, I have thick skin, I can take it. Modify it any way you like. RDesign has already refined the front end. I'll repost it here.

Updated renderings 11/9/14:

Updated renderings 11/4/14:

Updated renderings 10/24/14:

Updated rendering 10/16/14:

chazcron · 10-13-2014, 10:52 PM

Here is RDesign's modification of my front end.

Name: chazcron-camaro-8.jpg
Views: 16152
Size: 122.8 KB

Bhobbs · 10-13-2014, 11:05 PM

Nice work on the renders but I don't think those are the final head and taillights. They are probably just placeholders for preproduction cars.

Mr Twisty · 10-14-2014, 12:41 AM

Trunk opening is too small, but looking pretty good

Iroc_Z28 · 10-14-2014, 08:38 AM

Great work, I really like the smooth body lines on the first pic

Z_Rocks · 10-14-2014, 09:15 AM

Didn't GM at some point said, the 6th Gen is done from ground up? Regardless of these renderings (which did a great job bringing the reality closer), this 6th gen is just a minor evolution (in looks) from the 5th gen.

Not impressed at all.

DenverTaco07 · 10-14-2014, 10:43 AM

Quote:

Originally Posted by Z_Rocks

Didn't GM at some point said, the 6th Gen is done from ground up? Regardless of these renderings (which did a great job bringing the reality closer), this 6th gen is just a minor evolution (in looks) from the 5th gen.

Not impressed at all.

It is a new car from the ground up, new chassis Alpha vs Zeta, new engine, new everything...

If you are referring to the visual design, GM stated a long time ago that we should expect an Evolutionary NOT a Revolutionary design.

We are getting exactly what they have stated so far.

ssrs2lt · 10-14-2014, 11:02 AM

Great rendering!

Eich · 10-14-2014, 11:42 AM

It's a really nice job at rendering for sure. But IF the car looks like that, it feels to me like they sapped all of the edginess out of the car. It looks like a calm, milder, relaxed version of the 5th Gen. Not muscle enough for me.

By contrast, C6 -> C7 Vette, they actually found a way to make the car edgier, more aggressive and overall massively upgraded over the wonderful car it replaced.

MikesZ · 10-14-2014, 11:52 AM

Great renderings. I'm really liking the look of this car.

ilirg · 10-14-2014, 12:02 PM

The rendering is good, I don't think the area on the rear bumper above the license plate is so rounded though, I think the camp is doing a really good job of hiding the true lines of this car.

MikeT · 10-14-2014, 12:14 PM

Really nice work, chazcron. I'm very impressed.

smggugfaw · 10-14-2014, 12:49 PM

Here's chazcron's render with a TF4 style headlight. (sloppily added)

hypercarfanatic · 10-14-2014, 01:10 PM

Your render is beautiful, but sweet damn dem taillights be ugly

I thought the '15's were bad....

10-13-2014, 10:51 PM	#1
chazcron Drives: Sedan Join Date: Oct 2014 Location: United States Posts: 233	Fully Photoshop-rendered and de-camoed front, side and rear 2016 Camaro I took a stab at a rear de-camo.This time I went full quality by using an actual Camaro photo at a similar angle and grafted it on to the camo shot. By comparison, my initial front de-camo render looks a little rough. I find grafting a photo to the actual camo image gives a really accurate impression of the stance and proportion of the car, since the wheels are the real deal. Go ahead and hate on the headlights and taillights, they are only a guess/placeholder. Any critique negative or positive is appreciated, I have thick skin, I can take it. Modify it any way you like. RDesign has already refined the front end. I'll repost it here. Updated renderings 11/9/14: Updated renderings 11/4/14: Updated renderings 10/24/14: Updated rendering 10/16/14: Attached Images Last edited by chazcron; 11-09-2014 at 04:10 PM.

10-13-2014, 11:05 PM	#3
Bhobbs Drives: 2015 SS 1LE Red Hot, 1970 Chevelle Join Date: Apr 2012 Location: Chino, CA Posts: 6,989	Nice work on the renders but I don't think those are the final head and taillights. They are probably just placeholders for preproduction cars. __________________

10-14-2014, 12:41 AM	#4
Mr Twisty Drives: the 2nd amendment home Join Date: May 2008 Location: OK Posts: 14,707	Trunk opening is too small, but looking pretty good __________________ "They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." -- Benjamin Franklin

10-14-2014, 08:38 AM	#5
Iroc_Z28 Drives: 2017 1SS 1LE Join Date: Sep 2014 Location: Canada Posts: 408	Great work, I really like the smooth body lines on the first pic __________________

10-14-2014, 11:02 AM	#8
ssrs2lt Drives: too many Join Date: Jul 2013 Location: oh va pa ma tx Posts: 3,046	Great rendering! __________________

10-13-2014, 10:52 PM	#2
chazcron Drives: Sedan Join Date: Oct 2014 Location: United States Posts: 233	Here is RDesign's modification of my front end.

10-14-2014, 09:15 AM	#6
Z_Rocks Drives: everyone crazy... Join Date: May 2009 Location: SW Florida Posts: 2,109	Didn't GM at some point said, the 6th Gen is done from ground up? Regardless of these renderings (which did a great job bringing the reality closer), this 6th gen is just a minor evolution (in looks) from the 5th gen. Not impressed at all.

10-14-2014, 11:42 AM	#9
Eich Drives: '11 SW/Beige 2SS RS Manual Join Date: Sep 2008 Location: Virginia Posts: 684	It's a really nice job at rendering for sure. But IF the car looks like that, it feels to me like they sapped all of the edginess out of the car. It looks like a calm, milder, relaxed version of the 5th Gen. Not muscle enough for me. By contrast, C6 -> C7 Vette, they actually found a way to make the car edgier, more aggressive and overall massively upgraded over the wonderful car it replaced.

10-14-2014, 11:52 AM	#10
MikesZ Group Provocateur Drives: Long Distances Join Date: Jun 2009 Location: Arizona Posts: 1,022	Great renderings. I'm really liking the look of this car. __________________

10-14-2014, 12:02 PM	#11
ilirg Drives: 2011 Camaro 2ss Join Date: May 2013 Location: nj Posts: 1,559	The rendering is good, I don't think the area on the rear bumper above the license plate is so rounded though, I think the camp is doing a really good job of hiding the true lines of this car.

10-14-2014, 12:14 PM	#12
MikeT Drives: 2008 Malibu V6 Join Date: Mar 2008 Location: California Posts: 280	Really nice work, chazcron. I'm very impressed.

10-14-2014, 12:49 PM	#13
smggugfaw Drives: 2011 2LT/RS Join Date: Jul 2014 Location: Ohio Posts: 57	Here's chazcron's render with a TF4 style headlight. (sloppily added)

10-14-2014, 01:10 PM	#14
hypercarfanatic Drives: 2013 F-150 Join Date: Aug 2014 Location: United States Posts: 297	Your render is beautiful, but sweet damn dem taillights be ugly I thought the '15's were bad....

User Name		Remember Me?
Password