03-19-2017, 07:09 PM | #1 |
Drag Setup Questions??
So a little backround info. Car is a 2010 SS M6. Mods are bolt ons and TSP cam and it puts down 470 to the wheels. I ran the car a few tires last season on street tires. 60 foots were awful and I kept getting wheel hop which did not help. I plan on installing BMR toe and railing arms to help with the wheel hop and then going with 18 inch wheels for the rear with some drag radials.
http://www.sears.com/oe-performance-...Q&gclsrc=aw.ds I found those wheels that a decent priced and from what I have found in the forums they seem to fit fine. As for tires i dont know what to get i figured i cant go wrong with M/T's or Nittos. Any advice or suggestions would be helpful on which tires or wheels to go with. Thanks EDIT:Car is lower 1 1/4 inches all around. EDIT: Sorry for posting in the wrong category :( not sure how to delete this. Last edited by BandRcAMARO; 03-19-2017 at 08:23 PM. |
|
Tags |
cammed, drag radial, wheels and tires |
Thread Tools | |
|
|