02-07-2018, 08:37 AM | #43 |
Central PA Camaro5 Club
Drives: Hot Wheels Join Date: Apr 2009
Location: pa
Posts: 2,367
|
Looks great !
Love the ZL1 bumper...any issues with fit and finish ? Everything looks great just want to be sure about quality and fit before I decide on this
__________________
Hot Wheel SE # 343
|
02-07-2018, 12:25 PM | #44 |
@V3NOM.SS
Drives: 2016 Camaro 2SS Join Date: Dec 2016
Location: Bay City, Texas
Posts: 217
|
I've not had any issues whatsoever. There are a dozen people I could point you towards if you'd like a consensus and not just my opinion, but so far i've heard nothing but great things.
__________________
American Authority - ZL1 Conversion Front Bumper, ZL1 Hood, ZL1 Cannards, ZL1 Side Skirts, ZL1 inspired Hood, Rear Valance w/ Diffuser, darkened LED side markers, C7 Fender Vents, 1/4 Window Scoops, Fuel Lid, Tow Hook
Vertini 20x10.5/20x9.5 RF1.1 Gloss Black wheels R1Concepts Geomet Drilled/Slotted Rotors, Ceramic Barke Pads Mishimoto - Cold Air Intake (RED), Catch Can (RED) BMR - Strut Tower Brace (RED) GM Darkened Taillights, ZL1 1LE 3rd Brake Light[/SIZE] |
02-07-2018, 08:18 PM | #45 |
Drives: 16’ 2SS A8 HBM Procharged Join Date: Jun 2017
Location: Boston
Posts: 410
|
Awesome build man. Looks beautiful. Question about the window scoops. Do they just trap air in them or does the back of it allow the forced air to come out? Obviously the amount of drag is probably minimal anyways, I’m just curious. And do they make any air noises or vibrations at highway speeds?
Thanks.
__________________
16' 2SS A8 Hyperblue | P1SC-1, Race IC | JMS fuel pump voltage booster | Jannetty custom tune | Elite E2-X catch can | M017 Wheels
|
02-07-2018, 09:32 PM | #46 | |
@V3NOM.SS
Drives: 2016 Camaro 2SS Join Date: Dec 2016
Location: Bay City, Texas
Posts: 217
|
Quote:
__________________
American Authority - ZL1 Conversion Front Bumper, ZL1 Hood, ZL1 Cannards, ZL1 Side Skirts, ZL1 inspired Hood, Rear Valance w/ Diffuser, darkened LED side markers, C7 Fender Vents, 1/4 Window Scoops, Fuel Lid, Tow Hook
Vertini 20x10.5/20x9.5 RF1.1 Gloss Black wheels R1Concepts Geomet Drilled/Slotted Rotors, Ceramic Barke Pads Mishimoto - Cold Air Intake (RED), Catch Can (RED) BMR - Strut Tower Brace (RED) GM Darkened Taillights, ZL1 1LE 3rd Brake Light[/SIZE] |
|
02-18-2018, 08:19 PM | #47 |
@V3NOM.SS
Drives: 2016 Camaro 2SS Join Date: Dec 2016
Location: Bay City, Texas
Posts: 217
|
New addition to sstormtroopr camaro today. American Authority rear window louvers. I'm in love....
Now I just need to get them painted gloss black. Update: I painted them black, and made a "DIY" found here http://www.camaro6.com/forums/showth...1#post10121683
__________________
American Authority - ZL1 Conversion Front Bumper, ZL1 Hood, ZL1 Cannards, ZL1 Side Skirts, ZL1 inspired Hood, Rear Valance w/ Diffuser, darkened LED side markers, C7 Fender Vents, 1/4 Window Scoops, Fuel Lid, Tow Hook
Vertini 20x10.5/20x9.5 RF1.1 Gloss Black wheels R1Concepts Geomet Drilled/Slotted Rotors, Ceramic Barke Pads Mishimoto - Cold Air Intake (RED), Catch Can (RED) BMR - Strut Tower Brace (RED) GM Darkened Taillights, ZL1 1LE 3rd Brake Light[/SIZE] Last edited by theCATALYST; 03-25-2018 at 06:01 PM. |
02-18-2018, 08:21 PM | #48 |
@V3NOM.SS
Drives: 2016 Camaro 2SS Join Date: Dec 2016
Location: Bay City, Texas
Posts: 217
|
A view of the American Authority louvers from the inside.
__________________
American Authority - ZL1 Conversion Front Bumper, ZL1 Hood, ZL1 Cannards, ZL1 Side Skirts, ZL1 inspired Hood, Rear Valance w/ Diffuser, darkened LED side markers, C7 Fender Vents, 1/4 Window Scoops, Fuel Lid, Tow Hook
Vertini 20x10.5/20x9.5 RF1.1 Gloss Black wheels R1Concepts Geomet Drilled/Slotted Rotors, Ceramic Barke Pads Mishimoto - Cold Air Intake (RED), Catch Can (RED) BMR - Strut Tower Brace (RED) GM Darkened Taillights, ZL1 1LE 3rd Brake Light[/SIZE] |
02-18-2018, 08:23 PM | #49 |
@V3NOM.SS
Drives: 2016 Camaro 2SS Join Date: Dec 2016
Location: Bay City, Texas
Posts: 217
|
Another new addition. American Authority darkened LED side markers. These things are bright!
__________________
American Authority - ZL1 Conversion Front Bumper, ZL1 Hood, ZL1 Cannards, ZL1 Side Skirts, ZL1 inspired Hood, Rear Valance w/ Diffuser, darkened LED side markers, C7 Fender Vents, 1/4 Window Scoops, Fuel Lid, Tow Hook
Vertini 20x10.5/20x9.5 RF1.1 Gloss Black wheels R1Concepts Geomet Drilled/Slotted Rotors, Ceramic Barke Pads Mishimoto - Cold Air Intake (RED), Catch Can (RED) BMR - Strut Tower Brace (RED) GM Darkened Taillights, ZL1 1LE 3rd Brake Light[/SIZE] |
02-18-2018, 08:36 PM | #50 |
@V3NOM.SS
Drives: 2016 Camaro 2SS Join Date: Dec 2016
Location: Bay City, Texas
Posts: 217
|
A chance to take pictures is never passed up.
__________________
American Authority - ZL1 Conversion Front Bumper, ZL1 Hood, ZL1 Cannards, ZL1 Side Skirts, ZL1 inspired Hood, Rear Valance w/ Diffuser, darkened LED side markers, C7 Fender Vents, 1/4 Window Scoops, Fuel Lid, Tow Hook
Vertini 20x10.5/20x9.5 RF1.1 Gloss Black wheels R1Concepts Geomet Drilled/Slotted Rotors, Ceramic Barke Pads Mishimoto - Cold Air Intake (RED), Catch Can (RED) BMR - Strut Tower Brace (RED) GM Darkened Taillights, ZL1 1LE 3rd Brake Light[/SIZE] |
02-19-2018, 06:28 AM | #51 |
Drives: 2017 1SS 1LE Join Date: Jun 2017
Location: NJ
Posts: 59
|
|
02-19-2018, 03:37 PM | #52 |
@V3NOM.SS
Drives: 2016 Camaro 2SS Join Date: Dec 2016
Location: Bay City, Texas
Posts: 217
|
Awesome! Can't wait to see them. Install all aluminum brackets to louvers, hand tight on the acorn nuts. Clean windshield and brackets with alcohol completely. Add provided tape. Line up top edge Or louvers with top of glass (and extra set of hands is great here). Firmly press down at all bracket points. Remove acorn nuts and remove louvers. This allows you a chance to firmly press each bracket into the glass. When you remount the louvers, don't overtighten the nuts, hand tight will work sufficiently.
__________________
American Authority - ZL1 Conversion Front Bumper, ZL1 Hood, ZL1 Cannards, ZL1 Side Skirts, ZL1 inspired Hood, Rear Valance w/ Diffuser, darkened LED side markers, C7 Fender Vents, 1/4 Window Scoops, Fuel Lid, Tow Hook
Vertini 20x10.5/20x9.5 RF1.1 Gloss Black wheels R1Concepts Geomet Drilled/Slotted Rotors, Ceramic Barke Pads Mishimoto - Cold Air Intake (RED), Catch Can (RED) BMR - Strut Tower Brace (RED) GM Darkened Taillights, ZL1 1LE 3rd Brake Light[/SIZE] |
02-21-2018, 08:00 PM | #53 |
@V3NOM.SS
Drives: 2016 Camaro 2SS Join Date: Dec 2016
Location: Bay City, Texas
Posts: 217
|
2 more new American Authority products installed over the weekend. Their Rear valance and their new diffuser attachment. Definitely changes the look of the rear.
__________________
American Authority - ZL1 Conversion Front Bumper, ZL1 Hood, ZL1 Cannards, ZL1 Side Skirts, ZL1 inspired Hood, Rear Valance w/ Diffuser, darkened LED side markers, C7 Fender Vents, 1/4 Window Scoops, Fuel Lid, Tow Hook
Vertini 20x10.5/20x9.5 RF1.1 Gloss Black wheels R1Concepts Geomet Drilled/Slotted Rotors, Ceramic Barke Pads Mishimoto - Cold Air Intake (RED), Catch Can (RED) BMR - Strut Tower Brace (RED) GM Darkened Taillights, ZL1 1LE 3rd Brake Light[/SIZE] |
03-04-2018, 03:35 PM | #54 |
Drives: 2016 SS w/2SS A8 Blue Velvet Join Date: Dec 2009
Location: 39.793153,-86.238223
Posts: 3,678
|
Need a set of those.....
__________________
Never grow up, it's a trap!
|
03-06-2018, 10:46 AM | #55 |
@V3NOM.SS
Drives: 2016 Camaro 2SS Join Date: Dec 2016
Location: Bay City, Texas
Posts: 217
|
I used this as a guide to make them http://www.dodge-dart.org/forum/gene...#/topics/25510
Just start with a cardboard or foamboard model first and knce you get the length and shape correct, trace it out on some aluminum.
__________________
American Authority - ZL1 Conversion Front Bumper, ZL1 Hood, ZL1 Cannards, ZL1 Side Skirts, ZL1 inspired Hood, Rear Valance w/ Diffuser, darkened LED side markers, C7 Fender Vents, 1/4 Window Scoops, Fuel Lid, Tow Hook
Vertini 20x10.5/20x9.5 RF1.1 Gloss Black wheels R1Concepts Geomet Drilled/Slotted Rotors, Ceramic Barke Pads Mishimoto - Cold Air Intake (RED), Catch Can (RED) BMR - Strut Tower Brace (RED) GM Darkened Taillights, ZL1 1LE 3rd Brake Light[/SIZE] |
03-08-2018, 02:38 PM | #56 |
@V3NOM.SS
Drives: 2016 Camaro 2SS Join Date: Dec 2016
Location: Bay City, Texas
Posts: 217
|
Added some detail to the American Authority diffuser.
__________________
American Authority - ZL1 Conversion Front Bumper, ZL1 Hood, ZL1 Cannards, ZL1 Side Skirts, ZL1 inspired Hood, Rear Valance w/ Diffuser, darkened LED side markers, C7 Fender Vents, 1/4 Window Scoops, Fuel Lid, Tow Hook
Vertini 20x10.5/20x9.5 RF1.1 Gloss Black wheels R1Concepts Geomet Drilled/Slotted Rotors, Ceramic Barke Pads Mishimoto - Cold Air Intake (RED), Catch Can (RED) BMR - Strut Tower Brace (RED) GM Darkened Taillights, ZL1 1LE 3rd Brake Light[/SIZE] |
|
|
Post Reply
|
|
|