Homepage Garage Wiki Register Social Groups Calendar Search Today's Posts Mark Forums Read
#Camaro6
Go Back   CAMARO6 > CAMARO6.com General Forums > 2016+ Camaro: 6th Gen Camaro general forum


Phastek Performance


Post Reply
 
Thread Tools
Old 01-11-2016, 04:35 PM   #1
01Camaro
Account Suspended
 
Drives: 2001 Z28 Mn6
Join Date: Nov 2015
Location: Utica area NY
Posts: 21
My Estimation of Actual HorsePower

So here is my estimation of actual HP on the LS1,LS2, LS3 and new LT1

This is based on internet searches of crate motor testing with full intake and headers.All numbers based on installed in the cart with manual transmission with 15% rule of thumb drivetrain loss:

LS1puts out 405 HP on an engine dyno, typical rear wheel HP on dyno is ~ 300 HP. Calculate: 300/.85 (15% drivetrain loss for manual tranny) = 352 HP installed in Camaro/Vette (with exhaust and intake restrictions)

LS2 = 465 crate full headers on engine dyno. Typical rear wheel dyno numbers of 355 RWHP. Assuming 15% drivetrain loss, the LS2 in the Vette and GTO is ~415 HP (with exhaust and intake restrictions)

LS3 = 495 crate and 380 typical rear wheel dyno therefore 445 HP installed in Camaro/Vette (with exhaust and intake restrictions)

LT1 = 531 HP, 420 "typical"(not a lot of data yet) rear wheel dyno therefore 495 HP installed in Camaro/Vette (with exhaust and intake restrictions)

Also, this indicates that the MOST that someone can gain with cold air and full headers is 40-45HP. Anything above this for headers and CAI would be marketing BS. With a 15% drivetrain loss, 45 HP (ish) seems to agree with real world numbers of 30-40 HP for headers and cold air on the LS motors. Another point is, thiese estimations seems to validate that GM underrates its engines on a regular basis. My 6-speed manual LS1 Camaro was rated at 310 HP and put down 302 RWHP corrected , bone stock, paper filter.

http://www.enginelabs.com/news/danzi...ngine-and-wow/

http://www.hotrod.com/how-to/engine/...e-engine-dyno/

http://www.superchevy.com/how-to/vem...-crate-engine/

http://www.superchevy.com/how-to/vem...-crate-engine/


What do you guys think?

Last edited by 01Camaro; 01-11-2016 at 04:50 PM.
01Camaro is offline   Reply With Quote
Old 01-11-2016, 05:02 PM   #2
SS 1LE
マスタング = 遅い
 
SS 1LE's Avatar
 
Drives: 2017 Chevrolet Camaro SS 1LE
Join Date: Aug 2015
Location: Florida
Posts: 7,061
Internet horsepower bench racing?
SS 1LE is offline   Reply With Quote
Old 01-11-2016, 06:21 PM   #3
BradfordCamaro
SABIO
 
BradfordCamaro's Avatar
 
Drives: 2016 CAMARO 1SS
Join Date: Jul 2015
Location: Bradford, ON
Posts: 5,012
Way to much time on your hands?
__________________



BradfordCamaro is offline   Reply With Quote
Old 01-11-2016, 06:39 PM   #4
xgnxs
 
xgnxs's Avatar
 
Drives: 2005 Cobalt Base - 5 speed
Join Date: Apr 2015
Location: Ohio
Posts: 444
No...
xgnxs is offline   Reply With Quote
Old 01-11-2016, 06:54 PM   #5
Wolvie70
 
Wolvie70's Avatar
 
Drives: 2016 2SS, Summit White, A8, NPP
Join Date: Apr 2013
Location: Arkansas
Posts: 717
And you lost me at "So here is my estimation..."
Wolvie70 is offline   Reply With Quote
Old 01-11-2016, 07:15 PM   #6
BahamaTodd

 
BahamaTodd's Avatar
 
Drives: 08 Accord V6/M6 / 04 Canyon Z71
Join Date: Aug 2008
Location: Palm Beach, FL
Posts: 1,078
Quote:
Originally Posted by 01Camaro View Post
What do you guys think?
BahamaTodd is offline   Reply With Quote
Old 01-12-2016, 07:00 AM   #7
LesBaer
FMPG
 
LesBaer's Avatar
 
Drives: 2016 2SS
Join Date: Dec 2015
Location: CT
Posts: 1,888
From the link above: "...Chris Muzio at Danzio Performance Engineering recently bolted the dry-sump version (PN 19329997 available at Pace Performance) of the LT1 crate engine to his dyno..."

Why not just take the entire car as is instead of estimating driveline loss, etc?

....which has already been done btw.
__________________
Ordered 3/8/16- NFG/Ceramic White, M6, MRC, NPP, 6 pots, blk blade, no sunroof, blk splitter, blk bow ties, dark tails, nav.
ARH 1 7/8" ceramic coated full sys w/NPP; Maggie 9.2psi (85mm); Jannetty rough idle cam(TSP), tune and LT4 fuel system; Forgeline VX1 Black PVD (20x10,11); R88R 315's; ALPriority; BMR rear arms, bushings, DS loop; RF intake (red); nGauge

93 octane: 712rwhp, 654rwtq / E85 (E66 mix): 734rwhp, 674rwtq (SuperFlow Dyno)
LesBaer is offline   Reply With Quote
Old 01-12-2016, 07:29 AM   #8
Curr
Probably doesn't like you
 
Curr's Avatar
 
Drives: 2022 WCT ZL1 M6
Join Date: Jun 2015
Location: Boston-ish
Posts: 1,198
I think you need to read up on SAE horsepower ratings. That's what I think.
__________________
I hope the 6th gen Camaro has a melodious horn trumpet. I'll tootel it at the ladies, yelling out "Hi hi." - RenegadeXR

كافر
ΜΟΛΩΝ ΛΑΒΕ
железобетонное очко
Quod gratis asseritur, gratis negatur.
There is an unequal amount of good and bad in most things, the trick is to work out the ratio and act accordingly.
Curr is offline   Reply With Quote
Old 01-12-2016, 07:44 AM   #9
SpeedIsLife


 
Drives: Current Camaro-less
Join Date: Jul 2014
Location: Oregon
Posts: 3,242
The problem is that there are "experts" on here, aka shop owners trying to sell things, that try and say that SAE doesn't mean much.

"It just can't make less than the official rating!" "It allows for variation!"

Because it totally makes sense to have one engine making 460hp and another making 495 hp....who needs manufacturing consistency.
SpeedIsLife is offline   Reply With Quote
Old 01-12-2016, 08:58 AM   #10
pete1077
 
Drives: 2016 Mosaic Black 2SS
Join Date: Dec 2011
Location: NJ
Posts: 116
The HP is measured at the crank and is SAE certified. I've seen the SAE certification in another thread and it was measured at 455hp at the crank. It was dated sometime in 2013 to coincide with the Corvettes release but that wouldn't change anything since it's the same engine. The 15% drivetrain loss for manuals and 20% loss for automatics has been in place for many years however modern day powertrains are more efficient so the 15%/20% rule of thumb can't be a blanket rule for all powertrains anymore.
__________________
Current 2016 Mosaic black 2SS.
Previous 1994 and 2000 Z28 sold.
pete1077 is offline   Reply With Quote
Old 01-12-2016, 11:40 AM   #11
6spdhyperblue


 
Drives: 6th gen
Join Date: Aug 2013
Location: US
Posts: 3,664
Quote:
Originally Posted by Curr View Post
I think you need to read up on SAE horsepower ratings. That's what I think.
what year did that happen?
6spdhyperblue is offline   Reply With Quote
Old 01-12-2016, 11:53 AM   #12
SS 1LE
マスタング = 遅い
 
SS 1LE's Avatar
 
Drives: 2017 Chevrolet Camaro SS 1LE
Join Date: Aug 2015
Location: Florida
Posts: 7,061
Why is this thread still going lol?
SS 1LE is offline   Reply With Quote
 
Post Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:02 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.